Journal
Information Content Entity
Continuant
Entity
Periodical
Generically Dependent Continuant
Collection
RDF description of Applied Mechanics and Materials - http://gateway.utp.edu.my/vivo/individual/n1244
Driving Efficiency through Hydrocarbon for Green Car Air Conditioning
Identification of Multi-Input Multi-Output Systems Using Combined Direct and Indirect Methods
Adsorptive Removal of Ni2+ from Aqueous Solution onto Rice Husk-Based Activated Carbon
Hydrogen (Al+HCl) Improve the Combustion of Gasoline Engine and Reduction the Hydrocarbon and Carbon Monoxide up 33% to 34%
An Integrated Framework for Refinery Scheduling and Operational Optimization
Hydrogen Blended with Gasoline, Diesel, Natural Gas (NGV) as an Alternative Fuel for ICE in Malaysia
Private Finance Initiatives (PFI): Getting it Right
Economic Optimization of CO2 Capture Process Using MEA-MDEA Mixtures
Evolution of Triz Application for Manufacturing Industries
Ba-SAPO-34 Zeolite Membrane for CO2/N2 Separation: Process Optimization
System Reliability of Existing Jacket Platform in Malaysian Water (Failure Path and System Reliability Index)
Evaluation of Electrical Capacitance Tomography Thresholding Techniques for Void Fraction Measurement of Gas-Liquid System
The Study of Thermal Comfort and Noise Level in Battery Plate Factory
A Comparison Study between Integrated OBFARX-NN and OBF-NN for Modeling of Nonlinear Systems in Extended Regions of Operation
Kinetic Analysis on Catalytic Co-Gasification of Rubber Seed Shell and High Density Polyethylene Mixtures
Microwave Energy Pretreated In Situ Transesterification of Jatropha Curcas L in the Presence of Phase Transfer Catalyst
External Setup in SMED Improvement in an Injection Molding Manufacturing Company
Supersaturated Gas Bubble Formation across an Orifice
Contact Pressure Evaluation of a Gear Pair along the Line of Action Using Finite Element Analysis
Resource Management in Construction Project
Development of Morphology Dependent Titania Nanomaterial for Photo Degradation of Dyes
Effects of Twist Drill Point Angle on Thrust Force and Delamination Factor in Hybrid Fiber Composites Drilling
Consequence Study of Pressurized CO2 Release Containing Impurities with Obstacles
Desulfurization of Fuel Using Ionic Liquids: Computational Selection of Cation and Anion
Mechanical Properties of Engineered Cementitious Composites Mixture
Monoethanolamine (MEA) Wastewater Treatment Using Photo-Fenton Oxidation
Using Computational Fluid Dynamics Simulation to Perform Fire Investigation
Characterization of Stand Chopped Basalt Fiber Self – Compacting Reinforced Concrete (SCB-SCC)
Mathematical Modelling for Hydrogen Production from Steam Gasification of Cellulose
Meshless Local B-Spline Basis Functions-FD Method and its Application for Heat Conduction Problem with Spatially Varying Heat Generation
Hydrogen as an Alternative: Life Cycle Cost Analysis between Hydrogen Internal Combustion Engine (Al+Hci) and Gasoline Engine Based on Brake Specific Fuel Consumption
Manufacturing Flexibility and Operational Performance: Empirical Evidence in Manufacturing SMEs
Importance of Problem Statement in Solving Industry Problems
Durability of Sugar Cane Bagasse Ash (SCBA) Concrete towards Chloride Ion Penetration
Smoke Simulation in an Underground Train Station Using Computational Fluid Dynamic
Study of Indoor Air Quality in Academic Buildings of a University
Compliance Audit Model for Managing Process Safety in Process Industries
Visual Study of Hollow Cone Water Spray Jet Breakup Process at Elevated Temperatures and Pressures
Stress Analysis of Reeled Composite Pipelines Based on Shallow Shell Theories
Hydrodynamics of Oil Palm Frond in a Swirling Fluidized Bed Dryer
Greenhouse Remote Control and Monitoring System
Novel Approach and Setup for Multi Phase Mixtures Separation and Analysis at Offshore Conditions
Volatile Fatty Acids Production through Degradation of Biomass by Anaerobic Digestion (Mesophilic and Thermophilic)
Influence of Woven and Cross-Ply Laminates on Mechanical Properties of Coir Epoxy Composite
Polyethersulfone (PES) Membranes for CO2/CH4 Separation: Effect of Polymer Blending
Investigating the Effects of Blending Ratio and Injection Parameters on the Tensile Properties of Glass Fiber-Filled Nylon 66 Composite Gear
Fabrication and Characterization of Facilitated Transport Membrane for Gas Separation
Developments in Mercury Removal from Natural Gas - A Short Review
Microwave Incinerated Rice Husk Ash (MIRHA) and Used Engine Oil (UEO): Towards Sustainable Concrete Production
Effect of Anodes on Hydrodynamic Coefficients of Tubular Cylinders - Model Tests
Molecular Simulation for Piperazinium Based ILs: Effects of Alkyl Chain, Concentration and Anions on Henry’s Constants
Performance Analysis of Photo Voltaic Trombe Wall for Tropical Climate
Fundamental Frequency Estimation in Power System through the Utilization of Sliding Window-LMS Method
Effects of Intercalated Mono-, Di- and Triethanolammonium Cations on the Structural and Surface Characteristics of Sodium Form of Bentonite
Twin Pulsating Jets Impingement Heat Transfer for Fuel Preheating in Automotives
Photodegradation of Aqueous Diisopropanolamine Using Cu/TiO2: Effect of Calcination Temperature and Duration
Physicochemical Properties of Diethanolamine-Functionalized Si-MCM-41
Laccase Incorporated into PEG-PLA Polymer as Active and Stable Biocatalyst for Ionic Liquids Media
Solubility of CO2 in an Aqueous Ammonium Based Ionic Liquid
Determination of Adsorption Capacity of Agricultural-Based Carbon for Ni (II) Adsorption from Aqueous Solution
Energy Savings on Automotive Air Conditioner Using Liquid-Suction Heat Exchanger Subcooler
Mathematical Modeling for the Regenerator of Liquid Desiccant Air-Conditioning System
Impact of Motor Size &amp; Efficiency on Acceleration, Fuel Consumption &amp; Emissions of Split-Axle Through-the-Road Parallel Hybrid Electric Vehicle
Controlled Auto-Ignition Combustion in a Two-Stroke Cycle Engine Using Hot Burned Gases
A Review on Robustness of Covalent Organic Polymers for CO2 Capture
Raman Spectroscopic Study for the Determination of Monoethanolamine Concentration
Adsorption of Azo Dye Orange II by Supported TiO2: A Review
Experimental Study on the Replacement of HFC-R134a by Hydrocarbons in Automotive Air Conditioning System
Analytical Prediction of the Mechanical Properties of High Performance PVA Fiber Reinforced Concrete
Performance Study of Electric Compressor in Non-Electric Vehicle
The Effect of Drying Air Temperature and Humidity on the Drying Kinetic of Kenaf Core
Effect of Ball Milling on the Catalytic Conversion of Cellulose to Levulinic Acid
Size Dependent Uniaxially Loaded Stability of Triaxial Weave Fabric Composites
Fast Pyrolysis of Oil Palm Kernel Shell in a Fluidized Bed Reactor: The Effect of Pyrolysis Temperature on the Yields of Pyrolysis Products
Modelling of Adams-Bohart and Yoon-Nelson on the Removal of Oil from Water Using Microwave Incinerated Rice Husk Ash (MIRHA)
Physiochemical Properties of Pyrolysis Oil Derived from Fast Pyrolysis of Wet and Dried Rice Husk in a Free Fall Reactor
Fast Pyrolysis of Oil Palm Kernel Shell in a Fluidized Bed Reactor: The Effect of Biomass Size on the Yields of Pyrolysis Products
Hydrogen and Syngas Generation from Gasification of Coal in an Integrated Fuel Processor
Comparative Study of Linear Co-Volume Based Mixing Rules for Equation of State/ Excess Gibbs Energy (EOS/GE) Models for CO2 – MEA and CO2 – MDEA Systems
Wave Transmission over a Submerged Porous Breakwater an Experimental Study
Biosorption of Heavy Metal Ions, Oil and Grease from Industrial Waste Water by Banana Peel
Biodiesel Production from Palm Oil in a Millichannel Reactor
Numerical Coupling of Drilling Vibration to Riser’s Oscillation
Development of Process Safety Management System (PSMS): Mechanical Integrity (MI)
Design of a Four-Stroke Homogeneous Charge Compression Ignition Engine
Solubility of CO2 in Piperazine (PZ) Activated Aqueous Solutions of 2-Amino-2-methyl-1-propanol (AMP) at Elevated Pressures
A Study on Alternative Fuel Blending for Homogeneous Charge Compression Ignition (HCCI) Engine Using Palm Oil Methyl Ester and RON 97
Electron-Beam Irradiation of Halogen Free Flame Retardant Polymers for Wire and Cable Applications
Mobile Learning: An Application Prototype for AVL Tree Learning Object
Starch Based Soil Conditioner and Slow Release System
Effects of Different Granular Viscosity Models on the Bubbling Fluidized Bed - A Numerical Approach
The Development of Very Light Jet with Unconventional Arrangement
Analysis of a Tubular Linear Permanent Magnet Motor for Reciprocating Compressor Applications
A Unified Adaptive Fanger's Model for Thermal Comfort in Tropical Countries
CFD Study on Syngas Dispersion for Biomass Process Industry
Effect of Modified MIL-53 with Multi-Wall Carbon Nanotubes and Nanofibers on CO2 Adsorption
Study of CO2 Solubility in Aqueous Blend of Potassium Carbonate Promoted with Glycine
Recent Advances of Using Ionic Liquid in Lignocellulosic Biomass Degradation
Separation of Naphthenic Acid Using Hydroxide Based Ionic Liquids
Investigation of Various Mixtures of HC290/HC600 Refrigerants in Adiabatic Capillary Tube Used in Split-Type Air-Conditioner
Hydration Behavior Study of Imidazolium Based ILs in Water
Establishing Correlation between Leaf Spring Specifications and Camber Drop
Improvement of Engine Performance Using an Adaptive Valve Lift and Timing (AVLT) Mechanism at High Engine Speeds
Retrofitting R-22 Split Type Air Conditioning with Hydrocarbon (HCR-22) Refrigerant
Strength Development of Concrete Incorporating Metakaolin and PVA Fibres
Reliability Assessment Model for Aging Jacket Structures in Malaysian Waters
Experimental Investigation on Thermal Conduction of Carbon Nanotubes Reinforced Copper Matrix Composites
Novel Approach and Setup for Multi Component Mixtures Separation and Analysis at Offshore Conditions
Preparation of Biodiesel from Waste Cooking Oil Catalyzed by Basic Ionic Liquid
Strengthening Schemes for Flexure and Torsion Using FRP Laminates: A State of Art Review
Synthesis and Characterization of Co/CNTs Catalysts Prepared by Strong Electrostatic Adsorption (SEA) Method
Interfacial Defects on Mixed Matrix Membranes and Mitigation Techniques for Gas Separation: A Review
Thermodynamic Properties of Flufenamic Ionic Liquids
The CFD Simulation of Tray Dryer Design for Kenaf Core Drying
Phase Behavior and Ternary Diagram Construction for Membrane Forming Polycarbonate Solutions
Study on Indoor Air Quality of a Small Office in a Tropical Country
The Impact of Stormwater Runoff on Nutrient Removal in Sand Columns
Finite Element Assessment of Difficult Pipelines at Bends
Aspects of Carbon Dioxide Mitigation by Nannochloropsis oculata Cultured in a Photobioreactor
The Effect of Vortex Tube Air Cooling on Surface Roughness and Power Consumption in Dry Turning
Effects of Synthesis Conditions on the Textural and Morphological Properties of Mesoporous Silica (SBA-15)
Monitoring Heart Rate and Body Temperature Using Wireless Technology (Zigbee)
Energy Analysis and Compressor Performance of Refrigerator System Using Programmable Logic Control (PLC)
Analyzing Speed Accuracy Trade-Off in Control Movement Mechanism with Error Enforcement
Design and Modeling of a CMOS MEMS Gravimetric Sensor
Removal of Amines from Wastewater Using Membrane Separation Processes
Performance Study of Activated Carbon – Hydrofluoro Olefin Based Adsorption Cooling System
Study of the Effect of Surface Roughness on Droplet Spreading Behavior Using CFD Modeling
Mathematical Modeling of the Radial Crossflow Hollow Fiber Membrane Module for Multi-Component Gas Separation
Preparation and Characterization of Rice Husk Ash for Adsorption of Phenol from Aqueous Solutions
Investigation of Evacuated Tube Collector Performance at High Temperature Mode Using TRNSYS Simulation Model
Study and Analysis of Power System Stabiliser Performance Using Artificial Neural Network
Numerical Investigation on the Effect of Down Stand Structure in Fire Compartment on Smoke Contamination Atrium Upper Balconies
Development of Platform Selection Tool for Offshore Decommissioning in Malaysia
Response of Partially Covered Road Embankments and its Environmental Impact
Bending and Moment Stability in Reel Mechanisms
Drying Shrinkage of Fly Ash-Based Self-Compacting Geopolymer Concrete
Overcoming Limitation in DFM Using Layer Manufacturing
Comparison Studies of Criado and Coats-Redfern Methods for Co-Gasification of Rubber Seed Shell with High Density Polyethylene Mixtures
Review on Pyrolysis of Hardwood Residue to Biofuel
Pyrolyzed Waste Engine Oil Properties by Microwave-Induced Reactor
Measuring and ANFIS Modelling for Thermal Conductivity of Cu/Zn Bimetallic Nanofluids
Flow Dynamics Investigation of CO2/CH4 Gas Mixture through Porous Media Using Computational Approach
Investigation of Vortex Induced Vibration of Offshore Pipelines near Seabed
Hydrodynamic Forces on Linear and Multi-Dimensional Arrays of Circular Cylinders
Modeling of CO2 Capture by Amine Solution (MDEA) in Hollow Fiber Membranes
The Effect of Surface Area, Pore Volume, and Pore Size Distribution on the Modified Multiwalled Carbon Nanotubes
Modelling of CO2 Loading in DEA by Using Peak Ratio of Raman Spectroscopy
Wounding Composite Pipeline with Internally Pressurized Conditions
Homogeneous Deposition Precipitation Method for Synthesis of Carbon Nanofibre Based Cu-ZrO2 Catalyst for Hydrogenation of CO2 to Methanol
Performance Study of Waste Heat Driven Pressurized Adsorption Chiller
Effects of Ionic Liquid Blending in Polymeric Membrane: Physical Properties and Performance Evaluation
Study of 1-(2-Hydroxyethyle) 3-methylimidazolium Halide as Thermodynamic Inhibitors
Study on the Recovery of 1-butyl-3-methylimidazolium-based Ionic Liquids
Identifying Thermal and pH Stability of Thiols Compound in Garlic Extract
Load Capacity of Partially Textured Journal Bearing with Trapezoidal Recess
Performance Analysis of a Semicircular Free Surface Ocean Structure under the Different Water Depths
Fine Structural Analysis of Solvent Activated Cu-BTC for Carbon Dioxide Capture
Heavy Metal Removal by Oil Palm Empty Fruit Bunches (OPEFB) Biosorbent
Lumped Components Modeling of Double Pass Solar Collector with Porous Matrixes
Gas Permeability Study of Amine-Polymer Blend Membranes to Separate Carbondioxide from Natural Gas
Synthesis and Characterization of Nano-Structured Mixed Oxides
Modelling and Validation of Vehicle Ride Comfort Model
Fabrication and Microstructural Analysis of CNTs Reinforced Copper Matrix Nanocomposites via MIM Technique
Life Prediction of SAE 1045 Carbon Steel Using the Acoustic Emission Parameter
A Review on Glassy Polymeric Membranes for Gas Separation
Hydrogen Blended with Gasoline for Internal Combustion Engine Effect on Specific Fuel Consumption Based on Load Tests (L0,L1,L2)
Sensitivity of the CFD Mesh for a Single Rising Bubble in a Hallimond Tube
Effect of Superficial Gas Velocity on the Separation Efficiency of Inline Horizontal Swirl Tube Separator
Polymer-Nanoclay Mixed Matrix Membranes for CO2/CH4 Separation: A Review
Active Suspension System to Improve Ride Comfort Performance of Electric Vehicle (EV) Conversion
Optimization of One Legged Hopping Robot Hardware Parameters via Solidworks
Mathematical Modeling for the Prediction of Depth of Penetration in Double Pulse GMA Welding Using Fractional Factorial Method
Ecotoxicity of Pyridinium Based Ionic Liquids: A Review
Operating Characteristics of Gasifier Cookstove Using Different Biomass Materials
Extractive Desulphurization of Model Oil Using Sulphonium Based Ionic Liquids
The Effect of High Carbon Dioxide Content on the Performance and Emission Characteristics of a Direct Injection (DI) Compressed Natural Gas Engine
Effect of Modification Techniques on Surface of Carbon Nanofiber as Catalyst Support
Optimization of Naphthalene Extraction from its Mixture with Base Oil and Dibenzothiophene by BMIMDMP Ionic Liquid Using Response Surface Methodology (RSM)
Kinetic Study of PAHs Degradation in Produced Water Using Ti/RuO2 Anode
Review on Extraction and Characterization of Castor Seed Oil
Improving Rate of Penetration for PDC Drill Bit Using Reverse Engineering
Separation of Benzene and Cyclohexane with Mixed Solvent Using Extractive Distillation
Multiple Reprocessing of Gear Using Recycled Polypropylene
Challenges for Implementation of Building Information Modeling (BIM) in Malaysian Construction Industry
Designing an Alternative Game-Based for Learning Thai Language
Modeling and Simulation of Moving Iron Linear Generator (MILG)
Effect of Mn and Pb Promoters on the Performance of Cu/ZnO-Catalyst in CO2 Hydrogenation to Methanol
Performance Analysis of Hydrocarbon Mixture to Replace R134a in an Automotive Air Conditioning System
Three-Tier Inherent Safety Quantification (3-TISQ) for Toxic Release at Preliminary Design Stage
Evaluation of Noise and Air Flow on a Motorized Adaptive Valve Lift and Timing Engine
Experimental Investigation of a Gasoline-to-LPG Converted Engine Performance at Various Injection and Cylinder Pressures with Respect to Propane Spray Structures
Optimization of Temperature Rise during CO2 Absorption Process Using Response Surface Methodology
Electrodes with Supported Catalyst Layer in Unitized Reversible Fuel Cell System: A Review
Embodied Carbon of Buildings: Tools, Methods and Strategies
Kinetic Studies on Gold Nanoparticle Formation in Aqueous Medium
Spray Characteristics of Diesel-CNG Dual Fuel Jet Using Schlieren Imaging Technique
Homogenous Charge Compression Ignition (HCCI) Technique: A Review for Application in Two-Stroke Gasoline Engines
Experimental Study on the Performance of In-Cabin Ventilation System
Behavior of Carbon and Nitrogen after Low Temperature Thermochemical Treatment on Austenitic and Duplex Stainless Steel
Techno-Economic Evaluation of Cryogenic Networks for Separation of CO2 from Natural Gas
An Equation of State for the Liquid Phase
A Review of Bio-Oil Upgrading by Catalytic Hydrodeoxygenation
Multivariate Regression Analysis for Screening Process of Reliability Assessment
Broadside Vessel Collision Forces for Conventional Riser-Guard
Effect of Chopped Basalt Fiber on the Fresh and Hardened Properties of Fly Ash High Strength Concrete
Combustion Characteristics of Compressed Natural Gas in a Direct Microchannel-Injection Engine under Various Operating Conditions
Structural and Magnetic Properties of Ni0.5Zn0.5Fe2O4 Synthesized through the Sol-Gel Method
Characteristics of Lean and Stoichiometric Combustion of Compressed Natural Gas in a Direct Injection Engine
The Laminated Composite Thermosetting Pipe
Identification of Critical Factors to System Performance Using Availability Modeling and Simulation Analysis
Treatment of Wastewater Using an Integrated Submerged Attached Growth System
Failure Pressure Estimation of Corroded Pipeline with Different Depths of Interacting Defects Subjected to Internal Pressure
Modelling of Carbon Dioxide Leakage in Abandon Wells Using Computational Fluid Dynamics
An Experimental Study on the Effects of Biaxial Bending due to Eccentric Load on RC Beam
Application of Experimental Statistical Method in Optimizing Preparation Variables for Cu-Ni/TiO2 Photocatalyst
pH Dependence on Biosorption of Pb (II) by P. amaryllifolius Roxb
Experimental Investigation on the Performance of Four Types of Solar Stills in Malaysia
Compliance of Hot Work Permit to Process Safety Management (PSM) Regulation
Removal of Methylene Blue from Aqueous Solution by Ionic Liquid
Study of Simultaneous Mass Transfer and Nucleation in Cryogenic Packed Bed for the Removal of CO2 from Natural Gas
A Case Study on Indoor Comfort of Lecture Rooms in University Buildings
Exergy Analysis of a Micro-Gas Turbine Fueled with Syngas
A Converted Two-Stroke Cycle Engine for Compression Ignition Combustion
Fill Removal in Wellbore Using Coiled Tubing
Effects of Montmorillonite (MMT) Inorganic Fillers on Polyvinylidene (PVDF) Mixed Matrix Membrane
Predictive Stress-Strain Models for High Strength Concrete Subjected to Uniaxial Compression
Comparison of Soil Water Retention Functions for Humid Tropical Soils
Prediction of Suspended Sediments in a Hyper – Concentrated River Using Neural Networks
Development of Sediment Brick Utilizing Reservoir Sediment and Fly Ash
The Effect of Fuel Additives on Gasoline Heating Value and Spark Ignition Engine Performance: Case Study
Effects of Marine Growth on Hydrodynamic Coefficients of Rigid Tubular Cylinders
Development of the Shape Functions for Fatigue Test Using Digital Image Correlation
Empirical Correlations for Sizing Adiabatic Capillary Tube Using LPG as Refrigerant in Split-Type Air-Conditioner
Experimental Study of Airless Spray Jet Breakup at Elevated Temperature and Pressure
Estimation of Counterweight for Shaking Force Balancing of a Crank-Rocker Mechanism
Effect of Na/Al and Si/Al Ratios on Adhesion Strength of Geopolymers as Coating Material
Effect of Calcined Kaolin on the Mechanical Properties of High-Strength Concrete as Cement Replacing Material
Shear Capacity of RC Beams with Web Openings Strengthened with Multi Layers of CFRP