Academic Article RDF
pages:- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 143
- more...
- Effect of Reynolds number on heat transfer and flow for multi-oxide nanofluids using numerical simulation
- Effect of Roof Tile Colour on Heat Conduction Transfer, Roof-Top Surface Temperature and Cooling Load in Modern Residential Buildings under the Tropical Climate of Malaysia
- Effect of Sand Fines Concentration on the Erosion-Corrosion Mechanism of Carbon Steel 90° Elbow Pipe in Slug Flow
- Effect of seawater salinity, pH, and temperature on external corrosion behavior and microhardness of offshore oil and gas pipeline: RSM modelling and optimization
- Effect of Seismic Excitation on Mobilization of Trapped Oil Globule in Pore Doublet Model
- Effect of Selective Lateral Chromium Doping by RF Magnetron Sputtering on the Structural, and Opto-Electrical Properties of Nickel Oxide
- Effect of silane coupling agents on properties and performance of polycarbonate/silica MMMs
- Effect of silica fume on the fresh and hardened properties of fly ash-based self-compacting geopolymer concrete
- Effect of Silica Nanoparticles on Polymer Adsorption Reduction on Marcellus Shale
- Effect of Silica Oxide SiO2/Water Nanofluids Volume Concentration Ratio on Photovoltaic Thermal (PVT) Collector Efficiency
- Effect of silica-based hybrid nano-surfactant on interfacial tension reduction for enhanced oil recovery
- Effect of sludge sewage quality on heating value: case study in Jakarta, Indonesia
- Effect of slug flow frequency on the mechanical stress behavior of pipelines
- Effect of Sn Doping on the Properties of Nano-Structured ZnO Thin Films Deposited by Co-Sputtering Technique
- Effect of Sodium Hydroxide on Mechanical Characteristics of Kenaf Fibers Reinforced Concrete
- Effect of Solar Fraction on the Economic and Environmental Performance of Solar Air-Conditioning by Adsorption Chiller in a Tropical Region
- Effect of solution height on carbon dioxide absorption using high frequency ultrasonic irradiation
- Effect of solvent and calcination process on physicochemical features of silica nanocapsule for CO2 capture
- Effect of Solvent Vapor Treatment on Electrospun Nylon 6,6 Nanofiber Membrane
- Effect of solvents on the morphology and performance of Polyethersulfone (PES) polymeric membranes material for CO2/CH4 separation
- Effect of Some Input Parameters on 3D Basin and Petroleum Systems Modelling: A Case Study of the Norwegian Section of the Northern North Sea
- Effect of spinning conditions on the fabrication of cellulose acetate hollow fiber membrane for CO2 separation from N2 and CH4
- Effect of Stirring Rate and Freezing Time on the Percentage of Recovery of Residual Oil from Palm Oil Mill Effluent via a Stirred Freeze Crystallizer
- Effect of Stirring Rate and Functionalization Method on the Synthesis of Spherical Silica Particles Encapsulated Amine Moieties
- Effect of Storage Conditions on Moisture Sorption of Mixed Biomass Pellets
- Effect of Stress Distribution on Transverse and Longitudinal Framing in Cargo Ship using FEA Method
- Effect of structural variations in amorphous silicon based single and multi-junction solar cells from numerical analysis
- Effect of Structural Variations on the Thermophysical Properties of Protic Ionic Liquids: Insights from Experimental and Computational Studies
- Effect of Subject-Specific Region of Interest on Motor Imagery Brain–Computer Interface
- Effect of substrate roughness and PVD deposition temperatures on hardness and wear performance of AlCrN-coated WC-Co