Academic Article RDF
pages:- 236
- 237
- 238
- 239
- 240
- 241
- 242
- 243
- 244
- 245
- 246
- 247
- 248
- 249
- 250
- 251
- 252
- 253
- 254
- 255
- 256
- 257
- 258
- 259
- 260
- 261
- 262
- 263
- 264
- 265
- 266
- 267
- 268
- 269
- 270
- 271
- 272
- 273
- 274
- 275
- 276
- more...
- Numerical simulation of two-phase flow regime in horizontal pipeline and its validation
- Numerical simulation of two–phase separation in a small diameter ratio T‐junction
- Numerical simulation of two-phase separation in T-junction with experimental validation
- Numerical simulation of two-phase slug flow with liquid carryover in different diameter ratio T-junction
- Numerical Simulation on Heat Transfer Performance of a Liquid Cold Plate for Cooling of the Electric Vehicle Battery
- Numerical Solution of EMHD GO-Fe3O4/H2O Flow and Heat Transfer over Moving Riga Plate with Thermal Radiation and Heat Absorption/Generation Impacts
- Numerical solution of first kind Fredholm integral equations with semi-smooth kernel: A two-stage iterative approach
- Numerical Solution of Heat Equation using Modified Cubic B-spline Collocation Method
- Numerical study of fatigue behavior of the aluminum 7075-T6 cantilever beam with angular cracks in different stress ratios
- Numerical Study of Frequency-dependent Seismoelectric Coupling in Partially-saturated Porous Media
- Numerical Study of Glioma Growth Model with Treatment Using the Two-Stage Gauss-Seidel Method
- Numerical Study of Heat Transfer Enhancement of Turbulent Flow Using Twisted Tape Insert Fitted with Hemispherical Extruded Surface
- NUMERICAL STUDY OF HYDROGEN FUEL COMBUSTION IN COMPRESSION IGNITION ENGINE UNDER ARGON-OXYGEN ATMOSPHERE
- Numerical study of PCM solidification in a triplex tube heat exchanger with internal and external fins
- Numerical study of profiled conformal cooling channels for cooling time reduction in injection mould tools
- Numerical Study of the Enhancement of Heat Transfer for Hybrid CuO-Cu Nanofluids Flowing in a Circular Pipe
- Numerical study of the geometrically graded micro-channel heat sink for high heat flux application
- Numerical Study of Water Control with Downhole Oil-Water Separation Technology
- Numerical Study of Water Control with Downhole Oil-Water Separation Technology
- Numerical study on effects of nozzle hole spacing distance on steam submerged jet condensation from triangular holes spray nozzle
- Numerical study on the effect of operating nanofluids of photovoltaic thermal system (PV/T) on the convective heat transfer
- Numerical study on the prediction of oil recovery rates in unconventional reservoirs at high temperatures using ecologically friendly hybrid nanofluids
- Numerical Validation of Two-Phase Slug Flow and its Liquid Holdup Correlation in Horizontal Pipeline
- Nutrient Removal from Wastewater by Integrated Attached Growth Bioreactor
- Nylon 6,6 Waste Nanofiber Membrane for Produced Water Filtration: Experimental, Performance Modelling, Optimization and Techno-Economic Analysis
- Object Detection without Color Feature: Case Study Autonomous Robot
- Object identification-based stall detection and stall legitimacy analysis for traffic patterns
- Objective and subjective evaluation of a sleeping environment test chamber with a thermoelectric air cooling system
- Observation of a Cubical-Like Microstructure of Strontium Iron Garnet and Yttrium Iron Garnet Prepared via Sol–Gel Technique
- Observed spectrum in the South China Sea during storms