Raheem, A.T. and Aziz, A.R.A. and Zulkifli, S.A. and Ayandotun, W.B. and Baharom, M.B. (2024) Development and Validation of a Free Piston Engine Linear Generator Simulation Model Including Cycle-To-Cycle Variation and Ignition Timing Sub-Models. Lecture Notes in Mechanical Engineering. pp. 239-254. ISSN 21954356

Ahmed, S.W. and Tariq, A. and Altaf, K. and Ali, S. and Hussain, G. and Baharom, M.B. (2024) Thermal Analysis of Helical Pin Fins at Different Pitch Steps Through Numerical Technique. Lecture Notes in Mechanical Engineering. pp. 71-83. ISSN 21954356

Ghani, S.A.A. and Baharom, M.B. and Hassan, M.H.H. (2023) Characteristics of Dynamics Electromagnetic Force Acting on a Moving Metal Rod at Very Close Distance. Lecture Notes in Mechanical Engineering. pp. 625-634. ISSN 21954356

Raheem, A.T. and Aziz, R.A.A. and Zulkifli, S.A. and Rahem, A.T. and Ayandotun, W.B. and Elfakki, S.M. and Baharom, M.B. and Zainal, E.Z. (2023) Combustion Characteristics of a Free Piston Engine Linear Generator using Various Fuel Injection Durations. Evergreen, 10 (1). pp. 594-600.

Sultan, N.M. and Albarody, T.M.B. and Obodo, K.O. and Baharom, M.B. (2023) Effect of Mn+2 Doping and Vacancy on the Ferromagnetic Cubic 3C-SiC Structure Using First Principles Calculations. Crystals, 13 (2).

Baharom, M.B. and Mohammed, S.E. and Hussain, N. and Aziz, A.R.A. and Zainal, Z.E.A. and Ismael, M.A. (2023) A Study on the Effect of Structural Properties and Configuration of Low-Stiffness-Resilient-Shaft (LSRS) on Torsional Behavior. Lecture Notes in Mechanical Engineering. pp. 995-1011. ISSN 21954356

Jamil, A. and Baharom, M.B. and Aziz, A.R.B.A. and Mohammed, S.E. and Ayandotun, W.B. and Tariq, A. (2023) A study on in-cylinder flow characteristics of crank-rocker engine using CFD and PIV. Materials Today: Proceedings.

Albaghdadi, A.M. and Baharom, M.B. and Sulaiman, S.A. (2022) A Comparative Study and Validation of Kinematic Analysis of a Crank Rocker Engine Prototype Using MATLAB and ADAMS. Lecture Notes in Electrical Engineering, 758. pp. 125-133. ISSN 18761100

A. Aziz, A.R. and Ismael, M.A. and Zainal A., E.Z. and Mohammed, S.E. and Baharom, M.B. and Anwarudin, A.R.T. (2022) Effect of generator configuration on the free-piston motion and power generation of air-driven expander system. Alexandria Engineering Journal, 61 (4). pp. 3093-3104. ISSN 11100168

Jamil, A. and Baharom, M.B. and Abd Aziz, A.R.B. (2022) In-Cylinder Cold-Flow Analysis - �A Comparison of Crank-Slider Engine and Crank-Rocker Engine�. Journal Europeen des Systemes Automatises, 55 (2). pp. 229-236. ISSN 12696935

Raheem, A.T. and Aziz, A.R.A. and Zulkifli, S.A. and Baharom, M.B. and Rahem, A.T. and Ayandotun, W.B. (2022) Optimisation of operating parameters on the performance characteristics of a free piston engine linear generator fuelled by CNG�H2 blends using the response surface methodology (RSM). International Journal of Hydrogen Energy, 47 (3). pp. 1996-2016. ISSN 03603199

Albaghdadi, A.M. and Baharom, M.B. and Sualiman, S.A. (2021) Balancing and Simulation of a Double Crank-Rocker Engine Model for Optimum Reduction of Shaking Forces and Shaking Moments. Mathematical Modelling of Engineering Problems, 8 (2). pp. 237-245. ISSN 23690739

Dabbaghi, M.F. and Baharom, M.B. and Abdul Karim, Z.A. and A. Aziz, A.R. and Mohammed, S.E. and Zainal A., E.Z. (2021) Comparative evaluation of different heat transfer correlations on a single curved-cylinder spark ignition crank-rocker engine. Alexandria Engineering Journal, 60 (3). pp. 2963-2978. ISSN 11100168

Zainal A., E.Z. and Ismael, M.A. and Aziz, A.R.A. and Mohammed, S.E. and Baharom, M.B. and Firmansyah and Hanif Ibrahim, M. and Sahalan, M.I. and Qawiy, A. (2021) Effect of aspect ratio on frequency and power generation of a free-piston linear generator. Applied Thermal Engineering, 192. ISSN 13594311

Zainal A, E.Z. and Mohammed, S.E. and A. Aziz, A.R. and Baharom, M.B. and Jaffry, A. and Firmansyah and Shahrul A, A. and Ismael, M.A. (2021) Effect of aspect ratio on the performance characteristics of free piston linear generator engine fueled by hydrogen. International Journal of Hydrogen Energy, 46 (17). pp. 10506-10517. ISSN 03603199

Ismael, M.A. and Aziz, A.R.A. and Mohammed, S.E. and Zainal A, E.Z. and Baharom, M.B. and Raheem, A.T. and Ayandotun, W.B. and Harith, F.I. and Khazaimah, I. (2021) Experimental study on combustion stability and performance of hydrogen-enriched compressed natural gas of a free-piston linear generator. International Journal of Hydrogen Energy, 46 (79). pp. 39536-39547. ISSN 03603199

Jamil, A. and Baharom, M.B. and A. Aziz, A.R. (2021) IC engine in-cylinder cold-flow analysis � A critical review. Alexandria Engineering Journal, 60 (3). pp. 2921-2945. ISSN 11100168

Ismael, M.A. and Aziz, A.R.A. and Zainal A., E.Z. and Mohammed, S.E. and Ayandotun, W.B. and Baharom, M.B. and Sallehudin, M.S. and Syakirin R., M. and Anwerudin, A.R.T. and Masri, M.M. (2021) Investigation on free-piston motion and power generation of a dual-piston air-driven expander linear generator. Energy Reports, 7. pp. 2388-2397. ISSN 23524847

Ismael, M.A. and A. Aziz, A.R. and Mohammed, S.E. and Zainal A, E.Z. and Baharom, M.B. and Hagos, F.Y. (2021) Macroscopic and microscopic spray structure of water-in-diesel emulsions. Energy, 223. ISSN 03605442

Albaghdadi, A.M. and Baharom, M.B. and Sulaiman, S.A. (2021) Tri­planar balancing optimization of a double crank­rocker mechanism for shaking forces and shaking moments reduction. Proceedings of the Estonian Academy of Sciences, 70 (3). pp. 286-296. ISSN 17366046

Ullah, B. and Ovinis, M. and Baharom, M.B. and Ali, S.S.A. and Khan, B. and Javaid, M.Y. (2020) Effect of waves and current on motion control of underwater gliders. Journal of Marine Science and Technology (Japan), 25 (2). pp. 549-562. ISSN 09484280

Baharom, M.B. and Zahir, M.A. (2019) Machinery for mechanical engineers. SpringerBriefs in Applied Sciences and Technology. pp. 23-42. ISSN 2191530X

Mohammed, S.E. and Baharom, M.B. and Rashid Aziz, A.A. and Zainal, E.Z.Z. (2019) Modelling of combustion characteristics of a single curved-cylinder spark-ignition crank-rocker engine. Energies, 12 (17). ISSN 19961073

Aziz, A.R.A. and Baharom, M.B. and Abidin, E.Z.Z. and Firmansyah and Mohammed, S.E. and Nadhari, W.N.A.W. and Evelyn and Jaffry, M.N.M. (2019) Principal, design and characteristics of a free piston linear generator. Springer Singapore, pp. 127-144. ISBN 9789811501029; 9789811501012

Jaffry, M.N.M. and Abdul Karim, Z.A. and Ramlan, N.A. and Mohammed, S.E. and Zainal, E.Z. and Firmansyah and Ahmad, A.S. and Baharom, M.B. and Heikal, M.R. and Aziz, A.R.A. (2018) Bouncing phenomena of free piston linear generator at starting process. In: UNSPECIFIED.

Machmudah, A. and Parman, S. and Baharom, M.B. (2018) Continuous path planning of Kinematically redundant manipulator using Particle Swarm Optimization. International Journal of Advanced Computer Science and Applications, 9 (3). pp. 207-217. ISSN 2158107X

Setiawan, J.D. and Baharom, M.B. and Bin Abdul Wali, M.A. (2018) Development of force feedback in steering systems for virtual driving simulator. In: UNSPECIFIED.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. and Zainal, A.E.Z. and Firmansyah, F. (2018) Experimental investigation of ignition timing on the performance and emission characteristics of a crank-rocker engine. International Journal of Vehicle Structures and Systems, 10 (2). pp. 146-149. ISSN 09753060

Ismael, M.A. and Heikal, M.R. and Aziz, A.R.A. and Crua, C. and El-Adawy, M. and Nissar, Z. and Baharom, M.B. and Zainal, E.Z.A. and Firmansyah (2018) Investigation of puffing and micro-explosion of water-in-diesel emulsion spray using shadow imaging. Energies, 11 (9). ISSN 19961073

Jamil, A. and Baharom, M.B. and Lemma, T.A. (2018) Mathematical Modelling and Transient Thermal Analysis of Coupler-Rocker Bearing. In: UNSPECIFIED.

El-Adawy, M. and Heikal, M.R. and Rashid, A. and Aziz, A. and Adam, I.K. and Ismael, M.A. and Babiker, M.E. and Baharom, M.B. and Firmansyah and Abidin, E.Z.Z. (2018) On the application of proper orthogonal decomposition (POD) for in-cylinder flow analysis. Energies, 11 (9). ISSN 19961073

Yassen, T.A. and Waes, M.M. and Ahmed, O.K. and Tahseen, T.A. and Baharom, M.B. (2018) Performance investigation on an integrated multi-stage cylindrical-tank solar water heater. In: UNSPECIFIED.

Ullah, B. and Ovinis, M. and Baharom, M.B. and Ali, S.S.A. and Javaid, M.Y. (2018) Pitch and depth control of underwater glider using LQG and LQR via Kalman filter. International Journal of Vehicle Structures and Systems, 10 (2). pp. 137-141. ISSN 09753060

Kardan, R. and Baharom, M.B. and Mohammed, S.E. and Aziz, A.R.A. and Zainal, A.E.Z. and Firmansyah (2018) The effect of engine throttle position on the performance characteristics of a crank-rocker engine fitted with a conventional cylinder head. In: UNSPECIFIED.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. (2017) Performance and combustion characteristics of a novel crank-rocker engine. Journal of Mechanical Science and Technology, 31 (7). pp. 3563-3571. ISSN 1738494X

Hussain, N. and Baharom, M.B. and Maharun, M. (2016) Analysis of optimum wire rope configuration for equal unidirectional torsional stiffness for flexible steering shaft. In: UNSPECIFIED.

Mushtaq, S. and Baharom, M.B. (2016) Electromagnets arrangement for electromagnetic windshield wipers - Proposal and analysis. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 150-154. ISSN 18196608

Ullah, B. and Ovinis, M. and Baharom, M.B. and Setiawan, J.D. and Ali, S.S.A. and Javaid, M.Y. (2016) Motion control strategy of an underwater glider in the presence of external disturbances. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13031-13037. ISSN 18196608

Machmudah, A. and Parman, S. and Baharom, M.B. (2016) Phase space of self-motion and mechanism path tracking. In: UNSPECIFIED.

Imran, M.N. and Baharom, M.B. (2016) Simplified modelling method to predict output speed of an overrunning clutch using ADAMS/Solver subroutine. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13038-13041. ISSN 18196608

Mohammed, S.E. and Baharom, M.B. and Rashid, A. and Aziz, A. (2016) Thermodynamic analysis of a single cylinder crank-rocker engine. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12239-12246. ISSN 18196608

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. (2016) The effect of rocker ratio and connecting rod length on the performance of a crank-rocker mechanism with an extended rocker input link. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4221-4227. ISSN 18196608

Maharun, M. and Baharom, M.B. and Mohd, M.S. (2015) Ride comfort simulation of a vehicle equipped with semiactive steering system. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2495-2503. ISSN 22298649

Ullah, B. and Ovinis, M. and Baharom, M.B. and Javaid, M.Y. and Izhar, S.S. (2015) Underwater gliders control strategies: A review. In: UNSPECIFIED.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. (2014) Estimation of counterweight for shaking force balancing of a crank-rocker mechanism. Applied Mechanics and Materials, 663. pp. 135-140. ISSN 16609336

Mokhlif, N.D. and Al-Kayiem, H.H. and Baharom, M.B. (2014) Experimental analysis of petroleum wax characteristics for lubricant oil production in solvent dewaxing unit. Advanced Materials Research, 875-87. pp. 529-533. ISSN 10226680

Windarta and Baharom, M.B. (2014) Experimental prediction of wear rate on rail and wheel materials at dry sliding contact. In: UNSPECIFIED.

Mokhlis, M.M. and Baharom, M.B. (2014) Output speed prediction of an overrunning clutch for oscillatory input motion using a simplified approach. In: UNSPECIFIED.

Ismael, M.A. and Heikal, M.R. and Baharom, M.B. (2014) Spray-wall impingement of diesel-CNG dual fuel jet using schlieren imaging technique. In: UNSPECIFIED.

Parman, S. and MacHmudah, A. and Baharom, M.B. (2014) Zero distribution of system with unknown random variables case study: Avoiding collision path. In: UNSPECIFIED.

Ismael, M.A. and Heikal, M.R. and Baharom, M.B. (2013) Characteristics of compressed natural gas jet and jet-wall impingement using the Schlieren imaging technique. In: UNSPECIFIED.

Baharom, M.B. and Hussain, K. and Day, A.J. (2013) Design of full electric power steering with enhanced performance over that of hydraulic power-assisted steering. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 227 (3). pp. 390-399. ISSN 09544070

Maharun, M. and Baharom, M.B. and Mohd, M.S. (2013) Modelling and control of 4wd parallel split hybrid electric vehicle converted from a conventional vehicle. World Journal of Modelling and Simulation, 9 (1). pp. 47-58. ISSN 17467233

Mokhlif, N.D. and Al-Kayiem, H.H. and Baharom, M.B. (2012) Estimation model for the wax Crystal Size Distribution in solvent dewaxing process. Journal of Applied Sciences, 12 (24). pp. 2548-2554. ISSN 18125654

Windarta and Bin Sudin, M. and Baharom, M.B. (2012) Prediction of contact temperature on interaction between rail and wheel materials using pin-on-disc method. Journal of Applied Sciences, 12 (23). pp. 2424-2429. ISSN 18125654

Mohammed, S.E.L. and Baharom, M.B. and Aziz, A.R.A. (2011) Analysis of engine characteristics and emissions fueled by in-situ mixing of small amount of hydrogen in CNG. International Journal of Hydrogen Energy, 36 (6). pp. 4029-4037. ISSN 03603199

Mokhlif, N.D. and Al-Kayiem, H.H. and Baharom, M.B. (2011) Modeling of wax crystallization in production of lube oil base stock in solvent dewaxing. In: UNSPECIFIED.

Mokhlif, N.D. and Al-Kayiem, H.H. and Baharom, M.B. (2011) Numerical model to simulate wax crystallization in: Scraped surface heat exchangers. In: UNSPECIFIED.

Mohammed, S.E. and Iffa, E.D. and Baharom, M.B. and Aziz, A.R.A. (2011) Spray characteristic comparisons of compressed natural gas and hydrogen fuel using digital imaging. Journal of Applied Sciences, 11 (9). pp. 1624-1629. ISSN 18125654

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. and Firmansyah (2011) The effects of fuel-injection timing at medium injection pressure on the engine characteristics and emissions of a CNG-DI engine fueled by a small amount of hydrogen in CNG. International Journal of Hydrogen Energy, 36 (18). pp. 11997-12006. ISSN 03603199

Baharom, M.B. and Hussain, K. and Day, A.J. (2010) Design concepts and analysis of a semi-active steering system for a passenger car. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 223 (4). pp. 283-292. ISSN 14644193