Nuthalapati, S. and Kee, K.E. and Ismail, M.C. and Jumbri, K. and Pedapati, S.R. (2024) Comparative study of corrosion behaviour and microstructural analysis of as-received and sensitized SS304 U-bend samples under perlite thermal insulation using chloride drip test. Engineering Failure Analysis, 159.

Ismail, M.C. and Akhtar, S. and Sulieman, F. (2024) Development of Corrosion Management Framework with Equipment Susceptible to Creep. Lecture Notes in Mechanical Engineering. pp. 275-283. ISSN 21954356

Ismail, M.R. and Ismail, M.C. and Shah, S.Z.H. (2023) Effect of Acetate on Microbiologically Influenced Corrosion of Internal Pipeline Surfaces. Metals, 13 (12).

Ismail, M.C. and Hadi, M. and Yahya, S. and Ahmad, Z. (2023) INVESTIGATION ON CHEMICAL CONSTITUENTS IN DAMMAR RESIN EXTRACT FROM STINGLESS BEE HIVE AND ITS POTENTIAL AS CORROSION INHIBITOR (Penyiasatan Konstituen Kimia dalam Extrak Resin Dammar daripada Sarang Lebah Tanpa Sengat dan Potensinya Sebagai Perencat Kakisan). Malaysian Journal of Analytical Sciences, 27 (4). pp. 740-753.

Yusoff, N. and Ismail, M.C. (2023) Stress Corrosion Cracking and Oxide Layer Growth of P91 Steel in High Temperature Steam Environment. Lecture Notes in Mechanical Engineering. pp. 831-838. ISSN 21954356

Othman, N.H. and Mustapha, M. and Sallih, N. and Ahmad, A. and Mustapha, F. and Ismail, M.C. (2022) The Effect of Residual Solvent in Carbon�Based Filler Reinforced Polymer Coating on the Curing Properties, Mechanical and Corrosive Behaviour. Materials, 15 (10). ISSN 19961944

Yahya, S. and Kee, K.E. and Puad, M.J.M. and Ismail, M.C. (2022) Evaluation on steel corrosion in water-based drilling fluids: Inhibitors and scale involvement. Journal of Petroleum Science and Engineering, 211. ISSN 09204105

Khalid, H.U. and Ismail, M.C. and Nosbi, N. (2021) Degradation monitoring of hdpe material in co2-saturated nacl environment through electrochemical impedance spectroscopy technique. Materials, 14 (11). ISSN 19961944

Abas, A.Z. and Nor, A.M. and Suhor, M.F. and Rusli, A.M.A. and Ismail, M.C. (2021) HIC and SSC of Carbon Steel in High Partial Pressure CO2 Environments with Elevated H2S. In: UNSPECIFIED.

Shahrestani, S. and Ismail, M.C. and Kakooei, S. and Beheshti, M. (2021) Microstructure, phase compositions and mechanical properties of slip cast sintered SiC/Si3N4 composites. Ceramics International, 47 (9). pp. 13173-13180. ISSN 02728842

Alraeeini, A.S. and Nikbakht, E. and Ismail, M.C. (2021) Square Steel Tube Impressed Current Corrosion Rate in Term of Linear Polarization Resistance (LPR) Method. Lecture Notes in Civil Engineering, 139 LN. pp. 123-130. ISSN 23662557

Mohyaldinn, M.E. and Ismail, M.C. and Hasan, N. (2020) A Correlation to Predict Erosion Due to Sand Entrainment in Viscous Oils Flow Through Elbows. Lecture Notes in Mechanical Engineering. pp. 287-297. ISSN 21954356

Shahrestani, S. and Ismail, M.C. and Kakooei, S. and Beheshti, M. (2020) Effect of additives on slip casting rheology, microstructure and mechanical properties of Si3N4/SiC composites. Ceramics International, 46 (5). pp. 6182-6190. ISSN 02728842

Kumar, S.S. and Kakooei, S. and Ismail, M.C. and Haris, M. (2020) Effect of bath temperature on sodium diethyldithiocarbamate trihydrate loading of halloysite nanotube. In: UNSPECIFIED.

Kumar, S.S. and Kakooei, S. and Ismail, M.C. and Haris, M. (2020) FTIR analysis of halloysite nanotubes loaded with corrosion inhibitors. Malaysian Journal of Microscopy, 16 (1). pp. 133-140. ISSN 18237010

Beheshti, M. and Ismail, M.C. and Kakooei, S. and Shahrestani, S. (2020) Influence of temperature and potential range on Zn-Ni deposition properties formed by cyclic voltammetry electrodeposition in chloride bath solution. Corrosion Reviews, 38 (2). pp. 127-136. ISSN 03346005

Beheshti, M. and Kakooei, S. and Ismail, M.C. and Shahrestani, S. (2020) Investigation of CO2 electrochemical reduction to syngas on Zn/Ni-based electrocatalysts using the cyclic voltammetry method. Electrochimica Acta, 341. ISSN 00134686

Khalid, H.U. and Ismail, M.C. and Nosbi, N. (2020) Permeation damage of polymer liner in oil and gas pipelines: A review. Polymers, 12 (10). pp. 1-31. ISSN 20734360

Qasim, A. and Khan, M.S. and Lal, B. and Ismail, M.C. and Rostani, K. (2020) Quaternary ammonium salts as thermodynamic hydrate inhibitors in the presence and absence of monoethylene glycol for methane hydrates. Fuel, 259. ISSN 00162361

Qasim, A. and Lal, B. and Shariff, A.M. and Ismail, M.C. (2020) Role of Ionic Liquid-Based Multipurpose Gas Hydrate and Corrosion Inhibitors in Gas Transmission Pipeline. Nanotechnology in the Life Sciences. pp. 221-244. ISSN 25238027

Kumar, S.S. and Kakooei, S. and Ismail, M.C. and Haris, M. (2020) Synthesis and characterization of metal ion end capped nanocontainer loaded with duo green corrosion inhibitors. Journal of Materials Research and Technology, 9 (4). pp. 8350-8354. ISSN 22387854

Ismail, M.C. and Yahya, S. and Raja, P.B. (2019) Antagonistic effect and performance of CO2 corrosion inhibitors: Water chemistry and ionic response. Journal of Molecular Liquids, 293. ISSN 01677322

Yee, J.C. and Kee, K.E. and Hassan, S. and Nor, M.F.M. and Ismail, M.C. (2019) Corrosion inhibition of molybdate and nitrite for carbon steel corrosion in process cooling water. Journal of Engineering Science and Technology, 14 (4). pp. 2431-2444. ISSN 18234690

Othman, N.K. and Yahya, S. and Ismail, M.C. (2019) Corrosion inhibition of steel in 3.5 NaCl by rice straw extract. Journal of Industrial and Engineering Chemistry, 70. pp. 299-310. ISSN 1226086X

Yahya, S. and Othman, N.K. and Ismail, M.C. (2019) Corrosion inhibition of steel in multiple flow loop under 3.5 NaCl in the presence of rice straw extracts, lignin and ethylene glycol. Engineering Failure Analysis, 100. pp. 365-380. ISSN 13506307

Mohyaldinn, M.E. and Lin, W. and Gawi, O. and Ismail, M.C. and Ahmed, Q.A. and Ayoub, M.A. and Hasan, A. (2019) Experimental investigation of a new derived oleochemical corrosion inhibitor. Key Engineering Materials, 796. pp. 112-120. ISSN 10139826

Husna, O.N. and Ismail, M.C. and Mustapha, M. (2019) Mechanical and anticorrosive properties of epoxy containing modified graphene Oxide hybrids. In: UNSPECIFIED.

Zahidah, K.A. and Kakooei, S. and Ismail, M.C. and Mohebbi, H. and Joshaghani, A.H. and Ghasemi, M. and Eng, K.K. (2019) Smart anticorrosive coatings containing corrosion inhibitor-loaded halloysite nanotubes. Elsevier, pp. 425-447. ISBN 9780128158845

Nur Liyana Zakaria, W.W. and Kee, K.E. and Ismail, M.C. (2019) The effect of sensitization treatment on chloride induced stress corrosion cracking of 304L stainless steel using U-bend test. In: UNSPECIFIED.

Sivanathan, P. and Ismail, M.C. and Eng, K.K. (2018) Chloride Induced Stress Corrosion Cracking (CISCC) of austenitic stainless steel under thermal insulation at ambient temperature. Journal of Engineering and Applied Sciences, 13 (2). pp. 361-366. ISSN 1816949X

Haris, M. and Kakooei, S. and Ismail, M.C. (2018) Corrosion investigation of commercially available linepipe steel in CO2 environment. International Journal of Engineering and Technology(UAE), 7 (3). pp. 15-18. ISSN 2227524X

Burhani, N.R.A. and Muhammad, M. and Ismail, M.C. (2018) Corrosion under insulation rate prediction model for piping by two stages of artificial neural network. In: UNSPECIFIED.

Adham Adnan, M. and Kee, K.-E. and Raja, P.B. and Ismail, M.C. and Kakooei, S. (2018) Influence of Heat Treatment on the Corrosion of Carbon Steel in Environment Containing Carbon Dioxide and Acetic Acid. In: UNSPECIFIED.

Beheshti, M. and Ismail, M.C. and Kakooei, S. and Shahrestani, S. and Mohan, G. and Zabihiazadboni, M. (2018) Influence of deposition temperature on the corrosion resistance of electrodeposited zinc-nickel alloy coatings: Einfluss der Abscheidetemperatur auf die Korrosionsbeständigkeit von galvanisch aufgebrachten Zink-Nickel-Beschichtungen. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 472-482. ISSN 09335137

Beheshti, M. and Zabihiazadboni, M. and Ismail, M.C. and Kakooei, S. and Shahrestani, S. (2018) Investigation on Simultaneous Effects of Shot Peen and Austenitizing Time and Temperature on Grain Size and Microstructure of Austenitic Manganese Steel (Hadfield). In: UNSPECIFIED.

Shahrestani, S. and Ismail, M.C. and Kakooei, S. and Beheshti, M. and Zabihiazadboni, M. and Zavareh, M.A. (2018) Iridium Oxide pH Sensor Based on Stainless Steel Wire for pH Mapping on Metal Surface. In: UNSPECIFIED.

Rozi, F. and Mohebbi, H. and Ismail, M.C. and Kakooei, S. and Ahmadi, M. and Aghasadeghi, A. and Aghasadeghi, A. (2018) Laboratory investigation on the condensation and corrosion rates of top of line corrosion in carbon steel: a case study from pipeline transporting wet gas in elevated temperature. Corrosion Engineering Science and Technology, 53 (6). pp. 444-448. ISSN 1478422X

Abas, A.Z. and Ismail, M.C. and Eng, K.K. (2018) The effect of CO2-H2S on corrosion of low alloy steel 3Cr in high partial pressure CO2 environments. In: UNSPECIFIED.

Zahidah, K.A. and Kakooei, S. and Kermanioryani, M. and Mohebbi, H. and Ismail, M.C. and Raja, P.B. (2017) Benzimidazole-loaded halloysite nanotube as a smart coating application. International Journal of Engineering and Technology Innovation, 7 (4). pp. 243-254. ISSN 22235329

Rouhi, J. and Kakooei, S. and Ismail, M.C. and Karimzadeh, R. and Mahmood, M.R. (2017) Development of iridium oxide sensor for surface pH measurement of a corroding metal under deposit. International Journal of Electrochemical Science, 12 (11). pp. 9933-9943. ISSN 14523981

Kakooei, S. and Ismail, M.C. and Raja, B. and Mohebbi, H. and Emamian, S.S. and Moayedfar, M. (2017) Formation of nano-scale FeCO3 protective corrosion product in carbon dioxide-saturated 3 sodium chloride solution. Key Engineering Materials, 740 KE. pp. 3-8. ISSN 10139826

Zahidah, K.A. and Kakooei, S. and Ismail, M.C. and Bothi Raja, P. (2017) Halloysite nanotubes as nanocontainer for smart coating application: A review. Progress in Organic Coatings, 111. pp. 175-185. ISSN 03009440

Burhani, N.R.A. and Muhammad, M. and Mokhtar, A.A. and Ismail, M.C. (2016) Application of logistic regression in resolving influential risk factors subject to corrosion under insulation. In: UNSPECIFIED.

Sivanathan, P. and Ismail, M.C. and Eng, K.K. (2016) Chloride stress corrosion cracking (cscc) of austenitic stainless steel under thermal insulation: Case study analysis. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14239-14243. ISSN 18196608

Amirul Syamin Mad Jeli, M. and Kee, K.E. and Hassan, S. and Ismail, M.C. (2016) Compatibilty study of thermoplastics in ron97 gasoline blended with ethanol. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14214-14218. ISSN 18196608

Anuar, S.B.S. and Ismail, M.C. and Raja, P.B. and Rahman, N.A.B.A. (2016) Condensation rate effect on top of line corrosion in CO2 environment. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12058-12063. ISSN 18196608

Beheshti, M. and Kakooei, S. and Ismail, M.C. and Shahrestani, S. (2016) Design and implementation of scanning electrochemical microscopy (SECM) for scanning open circuit potential system on damaged coated surfaces. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14299-14302. ISSN 18196608

Jaal, R.A. and Ismail, M.C. and Ariwahjoedi, B. (2016) Determination of critical micelle concentration (CMC) of corrosion inhibitor via electrochemical measurement. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13431-13434. ISSN 18196608

Haghanifar, S. and Kakooei, S. and Ismail, M.C. (2016) Electrochemical hydrogen storage characteristics of Mg2-xCxNi (x = 0, 0.1, 0.2, 0.5) alloys prepared by mechanical alloying. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13013-13018. ISSN 18196608

Sarwar, M. and Abd Majid, M.A.B. and Ismail, M.C. (2016) Proposed guidelines for welding procedures to ensure quality welding of creep strength enhanced ferritic (CSEF) materials. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7765-7773. ISSN 18196608

Raja, P.B. and Ismail, M. and Ghoreishiamiri, S. and Mirza, J. and Ismail, M.C. and Kakooei, S. and Rahim, A.A. (2016) Reviews on Corrosion Inhibitors: A Short View. Chemical Engineering Communications, 203 (9). pp. 1145-1156. ISSN 00986445

Zahidah, K.A. and Kakooei, S. and Pang, M.A.S.B.M.R. and Ismail, M.C. and Eng, K.K. and Raja, P.B. and Mustapha, M. (2016) Statistical analysis of effective variable parameters on corrosion rate of X52 carbons steel. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12929-12936. ISSN 18196608

Mahmoud, H.R.S. and Hussain, P.B. and Ismail, M.C. (2016) Surface properties of nitrided layer on aisi 316l austenitic stainless steel produced by varied time low-temperature thermochemical treatments. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12099-12102. ISSN 18196608

Rahman, N.A.A. and Ismail, M.C. and Man, Z. (2016) The effect of hydrogen diffusivities on PANI-modified epoxy coating under potentiostatic charging. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4214-4220. ISSN 18196608

Burhani, N.R.A. and Muhammad, M. and Ismail, M.C. and Mahed, M.A. (2016) An experimental analysis using taguchi method in resolving the significant factors subject to corrosion under insulation. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11966-11970. ISSN 18196608

Mokhtar, A.A. and Saari, N. and Ismail, M.C. (2015) Assessment of insulated piping system inspection using logistic regression. Lecture Notes in Mechanical Engineering, 19. pp. 265-277. ISSN 21954356

Syafaat, T.A. and Ismail, M.C. (2015) Microbiologically influenced corrosion (MIC) of storage tank bottom plates. In: UNSPECIFIED.

Triwiyanto, A. and Hussain, P. and Priadi, D. and Ismail, M.C. (2015) Surface characteristics of low temperature hybrid thermochemical treatment of AISI 316L. In: UNSPECIFIED.

Burhani, N.R.A. and Muhammad, M. and Ismail, M.C. (2014) Available prediction methods for Corrosion under Insulation (CUI): A Review. In: UNSPECIFIED.

C. Fatah, M. and Ismail, M.C. and Ari-Wahjoedi, B. (2014) Corrosion behaviour of X52 steel in the presence of sulphite. Anti-Corrosion Methods and Materials, 61 (5). pp. 343-352. ISSN 00035599

Ab Rahman, A.A. and Ismail, M.C. (2014) Elucidating corrosion performance of weld in CO2 corrosion environment. Advanced Materials Research, 875-87. pp. 547-553. ISSN 10226680

Mokhtar, A.A. and Ismail, M.C. and Zainordin, A.B. and Shahid, S. (2014) A Framework for estimating piping reliability subject to corrosion under insulation. In: UNSPECIFIED.

Karim, M.F.A. and Ismail, M.C. and Awang, M. (2014) Laboratory deposition apparatus to study the effects of wax deposition on pipe magnetic field leakage signals. In: UNSPECIFIED.

Triwiyanto, A. and Hussain, P. and Ismail, M.C. (2014) Nanoindentation and microstructure of hybrid treated of AISI 316L at low temperature. International Journal of Materials Engineering Innovation, 5 (1). pp. 38-47. ISSN 17572754

Jaal, R.A. and Ismail, M.C. and Ariwahjoedi, B. (2014) A review of CO2 corrosion inhibition by imidazoline-based inhibitor. In: UNSPECIFIED.

Malik, A.F. and Burhanudin, Z.A. and Jeoti, V. and Hashim, U. and Foo, K.L. and Ismail, M.C. (2013) Acoustic wavelength effects on the propagation of SAW on piezo-crystal and polymer substrates. In: UNSPECIFIED.

Yaakob, S.M. and Ismail, M.C. (2013) Corrosion inhibitor performance with presence of FeCO3 film in Co2 corrosion environment under fluid flow effect. Advanced Materials Research, 789. pp. 507-510. ISSN 10226680

Fatah, M.C. and Ismail, M.C. and Wahjoedi, B.A. (2013) Effects of sulphide ion on corrosion behaviour of X52 steel in simulated solution containing metabolic products species: A study pertaining to microbiologically influenced corrosion (MIC). Corrosion Engineering Science and Technology, 48 (3). pp. 211-220. ISSN 1478422X

Fatah, M.C. and Ismail, M.C. and Ari-Wahjoedi, B. (2013) Electrochemical behavior of X52 steel in a CO2 environment in the presence of acetate and sulfide. Journal of Materials Engineering and Performance, 22 (1). pp. 236-244. ISSN 10599495

Kakooei, S. and Ismail, M.C. and Wahjoedi, B.A. (2013) Electrochemical study of iridium oxide coating on stainless steel substrate. International Journal of Electrochemical Science, 8 (3). pp. 3290-3301. ISSN 14523981

Fatah, M.C. and Ismail, M.C. and Wahjoedi, B.A. (2013) Empirical equation of sulphate reducing bacteria (SRB) corrosion based on abiotic chemistry approach. Anti-Corrosion Methods and Materials, 60 (4). pp. 206-212. ISSN 00035599

Mohyaldin, M.E. and Elkhatib, N. and Ismail, M.C. (2013) Extension of NORSOK CO2 corrosion prediction model for elbow geometry. International Journal of Computer Aided Engineering and Technology, 5 (1). pp. 99-112. ISSN 17572657

Mustafa, A.H. and Ari-Wahjoedi, B. and Ismail, M.C. (2013) Inhibition of CO2 corrosion of X52 steel by imidazoline-based inhibitor in high pressure CO2-water environment. Journal of Materials Engineering and Performance, 22 (6). pp. 1748-1755. ISSN 10599495

Triwiyanto, A. and Hussain, P. and Ismail, M.C. (2013) Microstructure and nanoindentation characterization of low temperature hybrid treated layer on austenitic stainless steel. In: UNSPECIFIED.

Triwiyanto, A. and Hussain, P. and Rahman, A. and Ismail, M.C. (2013) The influence of nitriding time of AISI 316l stainless steel on microstructure and tribological properties. Asian Journal of Scientific Research, 6 (2). pp. 323-330. ISSN 19921454

Triwiyanto, A. and Hussain, P. and Ismail, M.C. (2012) Behavior of carbon and nitrogen after low temperature thermochemical treatment on austenitic and Duplex stainless steel. Applied Mechanics and Materials, 110-11. pp. 621-626. ISSN 16609336

Kakooei, S. and Taheri, H. and Ismail, M.C. and Dolati, A. (2012) Corrosion investigation of pipeline steel in hydrogen sulfide containing solutions. Journal of Applied Sciences, 12 (23). pp. 2454-2458. ISSN 18125654

Asmara, Y.P. and Ismail, M.C. (2012) Efficient design of response surface experiment for corrosion prediction in CO 2 environments. Corrosion Engineering Science and Technology, 47 (1). pp. 10-18. ISSN 1478422X

Kakooei, S. and Ismail, M.C. and Ariwahjoedi, B. (2012) Mechanisms of microbiologically influenced corrosion: A review. World Applied Sciences Journal, 17 (4). pp. 524-531. ISSN 18184952

Belachew, C.T. and Ismail, M.C. and Karuppanan, S. (2011) Burst strength analysis of corroded pipelines by finite element method. Journal of Applied Sciences, 11 (10). pp. 1845-1850. ISSN 18125654

Mohyaldin, M.E. and Elkhatib, N. and Ismail, M.C. (2011) Coupling norsok CO2 corrosion prediction model with pipelines thermal/hydraulic models to simulate CO2 corrosion along pipelines. Journal of Engineering Science and Technology, 6 (6). pp. 709-719. ISSN 18234690

Fatah, M.C. and Ismail, M.C. and Ari-Wahjoedi, B. and Kurnia, K.A. (2011) Effects of sulphide ion on the corrosion behaviour of X52 steel in a carbon dioxide environment at temperature 40 °c. Materials Chemistry and Physics, 127 (1-2). pp. 347-352. ISSN 02540584

Triwiyanto, A. and Hussain, P. and Ismail, M.C. (2011) Elemental analysis of treated layers on stainless steel after low temperature hybrid thermochemical treatments. In: UNSPECIFIED.

Fatah, M.C. and Ismail, M.C. (2011) Empirical equation of CO2 corrosion with presence of low concentrations of acetic acid under turbulent flow conditions. Corrosion Engineering Science and Technology, 46 (1). pp. 49-55. ISSN 1478422X

Mokhtar, A.A. and Ismail, M.C. (2011) Probabilistic reliability assessment of an insulated piping in the presence of corrosion defects. Journal of Applied Sciences, 11 (11). pp. 2063-2067. ISSN 18125654

Asmara, Y.P. and Ismail, M.C. (2011) Study combinations effects of HAc in H2S/CO2 corrosion. Journal of Applied Sciences, 11 (10). pp. 1821-1826. ISSN 18125654

Fatah, M.C. and Ismail, M.C. (2009) Effect of low concentration acetic acid on CO2 corrosion in turbulent flow conditions. Arabian Journal for Science and Engineering, 34 (2 C). pp. 129-146. ISSN 2193567X