Silvianita and Atmaja, A.P. and Shafiq, N. (2024) Analysis of occupational accident risk in breakwater construction and floating piers. In: UNSPECIFIED.

Adebanjo, A.U. and Shafiq, N. and Kumar, V. and Farhan, S.A. and Olatoyan, O.J. and Qureshi, T.I. and Razak, S.N.A. and Adebanjo, I.C. and Guillaumat, L. (2024) Antimicrobial concrete for development: A critical review. Journal of Cleaner Production, 458.

Waqar, A. and Shafiq, N. and Othman, I. and Alsulamy, S.H. and Alshehri, A.M. and Falqi, I.I. (2024) Deterrents to the IoT for smart buildings and infrastructure development: A partial least square modeling approach. Heliyon, 10 (10).

Razak, S.N.A. and Shafiq, N. and Guillaumat, L. and Lohana, V.K. and Farhan, S.A. and Shafee, F.A.A. (2024) Effect of Fire on High-Strength Fly-Ash-Based Geopolymer Concrete. Lecture Notes in Civil Engineering, 324. pp. 339-349.

Usman Adebanjo, A. and Shafiq, N. and Abd Razak, S.N. and Kumar, V. and Farhan, S.A. (2024) Effect of nanosized titanium dioxide and zinc oxide as antimicrobial agents on early compressive strength of high-performance concrete. In: UNSPECIFIED.

Abd Razak, S.N. and Shafiq, N. and Wan Zawawi, N.A. and Kumar, V. and Adebanjo, A. and Guillaumat, L. (2024) Enhancing Mechanical Properties and Antimicrobial Activity of Portland Cement through Titanium Oxide Incorporation. In: UNSPECIFIED.

Waqar, A. and Othman, I. and Shafiq, N. and Mansoor, M.S. (2024) Evaluating the critical safety factors causing accidents in downstream oil and gas construction projects in Malaysia. Ain Shams Engineering Journal, 15 (1).

Waqar, A. and Shafiq, N. and Othman, I. and Alqahtani, F.K. and Alshehri, A.M. and Sherif, M.A. and Almujibah, H.R. (2024) Examining the impact of BIM implementation on external environment of AEC industry: A PEST analysis perspective. Developments in the Built Environment, 17.

Nurchasanah, Y. and Suhendro, B. and Satyarno, I. and Shafiq, N. and Mahendra, A. (2024) Mechanical Properties and Numerical Design of Hybrid Damper of Steel Bar and Engine Mounting Rubber. Civil Engineering and Architecture, 12 (1). pp. 586-606.

Waqar, A. and Shafiq, N. and Bheel, N. and Benjeddou, O. and Hamah Sor, N. and Hu, J.W. and Najm, H.M. and Almujibah, H.R. (2024) Modeling of success factors of using PU coats in concrete construction projects. Heliyon, 10 (7).

Waqar, A. and Othman, I. and Almujibah, H.R. and Sajjad, M. and Deifalla, A. and Shafiq, N. and Azab, M. and Qureshi, A.H. (2024) Overcoming implementation barriers in 3D printing for gaining positive influence considering PEST environment. Ain Shams Engineering Journal, 15 (3).

Al-Masoodi, A.H.H. and Abbas, Y.M. and Alkhatib, F. and Khan, M.I. and Shafiq, N. and ElGawady, M. (2023) Aerodynamic optimization for corner modification of octagonal-shape tall buildings using computational approach. Journal of Building Engineering, 76.

Waqar, A. and Othman, I. and Shafiq, N. and Mansoor, M.S. (2023) Applications of AI in oil and gas projects towards sustainable development: a systematic literature review. Artificial Intelligence Review, 56 (11). pp. 12771-12798. ISSN 02692821

Waqar, A. and Khan, M.B. and Shafiq, N. and Skrzypkowski, K. and Zagórski, K. and Zagórska, A. (2023) Assessment of Challenges to the Adoption of IOT for the Safety Management of Small Construction Projects in Malaysia: Structural Equation Modeling Approach. Applied Sciences (Switzerland), 13 (5). ISSN 20763417

Rafindadi, A.D. and Shafiq, N. and Othman, I. and Ibrahim, A. and Aliyu, M.M. and Miki�, M. and Alarifi, H. (2023) Data mining of the essential causes of different types of fatal construction accidents. Heliyon, 9 (2).

Singh, P. and Adebanjo, A. and Shafiq, N. and Razak, S.N.A. and Kumar, V. and Farhan, S.A. and Adebanjo, I. and Singh, A. and Dixit, S. and Singh, S. and Sergeevna, M.T. (2023) Development of performance-based models for green concrete using multiple linear regression and artificial neural network. International Journal on Interactive Design and Manufacturing. ISSN 19552513

Bheel, N. and Mohammed, B.S. and Ali, M.O.A. and Shafiq, N. and Radu, D. (2023) Effect of graphene oxide as a nanomaterial on the bond behaviour of engineered cementitious composites by applying RSM modelling and optimization. Journal of Materials Research and Technology, 26. pp. 1484-1507.

Bheel, N. and Ali, M.O.A. and Kırgız, M.S. and Shafiq, N. and Gobinath, R. (2023) Effect of graphene oxide particle as nanomaterial in the production of engineered cementitious composites including superplasticizer, fly ash, and polyvinyl alcohol fiber. Materials Today: Proceedings.

Bheel, N. and Mohammed, B.S. and Ahmed Ali, M.O. and Shafiq, N. and Mohamed Tag-eldin, E. and Ahmad, M. (2023) Effect of polyvinyl alcohol fiber on the mechanical properties and embodied carbon of engineered cementitious composites. Results in Engineering, 20.

Waqar, A. and Bheel, N. and Shafiq, N. and Othman, I. and Khan, M.B. and Mansoor, M.S. and Benjeddou, O. and Yaseen, G. (2023) Effect of volcanic pumice powder ash on the properties of cement concrete using response surface methodology. Journal of Building Pathology and Rehabilitation, 8 (1).

Zulkarnain, N.N. and Abd Hamid, A.I. and Shafiq, N. and Abd Rahman, S.H. and Farhan, S.A. (2023) Effects of Hydroxycarboxylic Acid-Based Retarder on the Compressive Strength of Geopolymer Cement under Wellbore Conditions. Engineering Proceedings, 56 (1).

Khan, M.B. and Shafiq, N. and Waqar, A. and Radu, D. and Cisma�, C. and Imran, M. and Almujibah, H. and Benjeddou, O. (2023) Effects of Jute Fiber on Fresh and Hardened Characteristics of Concrete with Environmental Assessment. Buildings, 13 (7).

Khan, M.B. and Iqbal Khan, M. and Shafiq, N. and Abbas, Y.M. and Imran, M. and Fares, G. and Khatib, J.M. (2023) Enhancing the mechanical and environmental performance of engineered cementitious composite with metakaolin, silica fume, and graphene nanoplatelets. Construction and Building Materials, 404.

Kumar, V. and Kutty, S.R.M. and Abd Razak, S.N. and Shafiq, N. and Adebanjo, A. and Baloo, L. and Azougagh, A.-A. and Iseni, R. (2023) Exploring the untapped potentials of oily sludge ash blended with fly ash for geopolymer binder via waste valorisation approach. Journal of Hazardous Materials Letters, 4.

Waqar, A. and Othman, I. and Shafiq, N. and Deifalla, A. and Ragab, A.E. and Khan, M. (2023) Impediments in BIM implementation for the risk management of tall buildings. Results in Engineering, 20.

Ahmad Shafee, F.A. and Shafiq, N. and Farhan, S.A. (2023) Influence of Urban Lakes on Quality of Life: Perspective of Public Recreationists on Physical and Health Factors. Lecture Notes in Civil Engineering, 334 LN. pp. 243-253.

Waqar, A. and Othman, I. and Shafiq, N. and Mateen Khan, A. (2023) Integration of passive RFID for small-scale construction project management. Data and Information Management, 7 (4). ISSN 25439251

Wahab, M.M.A. and Shafiq, N. and Alaloul, W.S. and Rafiq, W. and Husna, N. and Farhan, S.A. and Ikram, T.A. and Musarat, M.A. (2023) Low-Concentration Acid Treatment of Sugarcane Bagasse with Silica Extraction for Partial Cement Replacement. Iranian Journal of Science and Technology - Transactions of Civil Engineering. ISSN 22286160

Al-Aidrous, A.-H.M.H. and Shafiq, N. and Rahmawati, Y. and Mohammed, B.S. and Al-Ashmori, Y.Y. and Baarimah, A.O. and Alawag, A.M. (2023) Major blocking factors affecting the application of industrialized building system. Ain Shams Engineering Journal, 14 (10).

Rafindadi, A.D. and Shafiq, N. and Othman, I. and Miki�, M. (2023) Mechanism Models of the Conventional and Advanced Methods of Construction Safety Training. Is the Traditional Method of Safety Training Sufficient? International Journal of Environmental Research and Public Health, 20 (2).

Waqar, A. and Othman, I. and Shafiq, N. and Altan, H. and Ozarisoy, B. (2023) Modeling the Effect of Overcoming the Barriers to Passive Design Implementation on Project Sustainability Building Success: A Structural Equation Modeling Perspective. Sustainability (Switzerland), 15 (11). ISSN 20711050

Adebanjo, A.U. and Shafiq, N. and Razak, S.N.A. and Kumar, V. and Farhan, S.A. and Adebanjo, I. and Olatoyan, O.J. (2023) Modelling of the Effects of Antimicrobial Agents on the Compressive Strength of High-Performance Concrete Using Response Surface Methodology â�. Engineering Proceedings, 56 (1).

Tahir, H. and Khan, M.B. and Shafiq, N. and Radu, D. and Nyarko, M.H. and Waqar, A. and Almujibah, H.R. and Benjeddou, O. (2023) Optimisation of Mechanical Characteristics of Alkali-Resistant Glass Fibre Concrete towards Sustainable Construction. Sustainability (Switzerland), 15 (14).

Khan, M.B. and Waqar, A. and Bheel, N. and Shafiq, N. and Hamah Sor, N. and Radu, D. and Benjeddou, O. (2023) Optimization of Fresh and Mechanical Characteristics of Carbon Fiber-Reinforced Concrete Composites Using Response Surface Technique. Buildings, 13 (4). ISSN 20755309

Rafindadi, A.D. and Othman, I. and Shafiq, N. and Alarifi, H. and Wanees, A.A. and Ibrahim, A. (2023) Strategies for enhancing the use of Building Information Modelling (BIM) in the construction industry. In: UNSPECIFIED.

Abbas, Y.M. and Shafiq, N. and Fares, G. and Osman, M. and Khan, M.I. and Khatib, J.M. (2023) Strength Iso-Responses of Shear-Deficient Ultra-High Performance Fiber Reinforced Concrete Beams. Sustainability (Switzerland), 15 (5).

Bheel, N. and Ali, M.O.A. and Shafiq, N. and Almujibah, H.R. and Awoyera, P. and Benjeddou, O. and Shittu, A. and Olalusi, O.B. (2023) Utilization of millet husk ash as a supplementary cementitious material in eco-friendly concrete: RSM modelling and optimization. Structures, 49. pp. 826-841. ISSN 23520124

Ismail, F.I. and Shafiq, N. and Abbas, Y.M. and Ateya, E.S. and Zahid, M. and Bheel, N. and Benjeddou, O. and Abdulkadir, I. (2023) The behavior of graphene-nanoplatelets-based high-performance concrete under ambient curing. Structures, 47. pp. 694-708.

Mohammed, M. and Shafiq, N. and Abdallah, N.A.W. and Ayoub, M. and Haruna, A. and Ibrahim, M.B. (2022) AL-ACHIEVING SUSTAINABLE WASTE MANAGEMENT AT CONSTRUCTION SITES VIA LIFE-CYCLE OF ENVIRONMENTAL IMPACT ASSESSMENT. Journal of Engineering Science and Technology, 17 (1). pp. 604-619. ISSN 18234690

Al-Masoodi, A.H.H. and Alkhatib, F.H. and Shafiq, N. and Wahab, M.M.A. (2022) The Aerodynamic Performance of Tall Buildings by Utilizing Aerodynamic Modifications - A Review Study. In: UNSPECIFIED.

Ismail, F.I. and Shafiq, N. and Abbas, Y.M. and Bheel, N. and Benjeddou, O. and Ahmed, M. and Sabri, M.M. and Ateya, E.S. (2022) Behavioral assessment of graphene nanoplatelets reinforced concrete beams by experimental, statistical, and analytical methods. Case Studies in Construction Materials, 17. ISSN 22145095

Mohammed, M. and Shafiq, N. and Al-Mekhlafi, A.-B.A. and Al-Fakih, A. and Zawawi, N.A. and Mohamed, A.M. and Khallaf, R. and Abualrejal, H.M. and Shehu, A.A. and Al-Nini, A. (2022) Beneficial Effects of 3D BIM for Pre-Empting Waste during the Planning and Design Stage of Building and Waste Reduction Strategies. Sustainability (Switzerland), 14 (6). ISSN 20711050

Alkhatib, F. and Kasim, N. and Goh, W.I. and Shafiq, N. and Amran, M. and Kotov, E.V. and Albaom, M.A. (2022) Computational Aerodynamic Optimization of Wind-Sensitive Irregular Tall Buildings. Buildings, 12 (7). ISSN 20755309

Rafindadi, A.D. and Shafiq, N. and Othman, I. (2022) A Conceptual Framework for BIM Process Flow to Mitigate the Causes of Fall-Related Accidents at the Design Stage. Sustainability (Switzerland), 14 (20). ISSN 20711050

Rahman, S.H.A. and Farhan, S.A. and Sazali, Y.A. and Shafiee, L.H. and Husna, N. and Hamid, A.I.A. and Shafiq, N. and Zulkarnain, N.N. and Habarudin, M.F. (2022) Effect of Elastomeric Expandable Additive on Compressive Strength and Linear Expansion of Fly-Ash-Based Strength-Enhanced Geopolymer Cement for Shrinkage-Resistant Oil-Well Cementing. Applied Sciences (Switzerland), 12 (4). ISSN 20763417

Al-Aidrous, A.-H.M.H. and Shafiq, N. and Al-Ashmori, Y.Y. and Al-Mekhlafi, A.-B.A. and Baarimah, A.O. (2022) Essential Factors Enhancing Industrialized Building Implementation in Malaysian Residential Projects. Sustainability (Switzerland), 14 (18). ISSN 20711050

Suppiah, R.R. and Nermoggan, P. and Shafiq, N. (2022) Experimental investigation of the effects of temperature on the morphological characteristics of geopolymer binders. Journal of Petroleum Exploration and Production Technology, 12 (12). pp. 3303-3310. ISSN 21900558

Abd Razak, S.N. and Shafiq, N. and Hasan Nikbakht, E. and Mohammed, B.S. and Guillaumat, L. and Farhan, S.A. (2022) Fire performance of fly-ash-based geopolymer concrete: Effect of burning temperature on mechanical and microstructural properties. In: UNSPECIFIED.

Abd Razak, S.N. and Shafiq, N. and Guillaumat, L. and Farhan, S.A. and Lohana, V.K. (2022) Fire-Exposed Fly-Ash-Based Geopolymer Concrete: Effects of Burning Temperature on Mechanical and Microstructural Properties. Materials, 15 (5). ISSN 19961944

Saad, S.A. and Jamaluddin, A.N. and Masjuki, S.A. and Beddu, S. and Shafiq, N. (2022) INFLUENCES OF GRINDING PROCESS ON THE PHYSICAL AND MORPHOLOGICAL CHARACTERISTICS OF ULTRAFINE TREATED RICE HUSK ASH. International Journal of GEOMATE, 23 (97). pp. 74-81. ISSN 21862982

Zulkarnain, N.N. and Shafiq, N. and Abd Rahman, S.H. and Farhan, S.A. (2022) Lignosulfonate as a retarder in geopolymer cement for oil well cementing: Effect on compressive strength. In: UNSPECIFIED.

Mohammed, M. and Shafiq, N. and Al-Mekhlafi, A.-B.A. and Rashed, E.F. and Khalil, M.H. and Zawawi, N.A. and Muhammad, A. and Sadis, A.M. (2022) The Mediating Role of Policy-Related Factors in the Relationship between Practice of Waste Generation and Sustainable Construction Waste Minimisation: PLS-SEM. Sustainability (Switzerland), 14 (2). ISSN 20711050

Gardezi, S.S.S. and Shafiq, N. and Khan, M.W.A. (2022) Relational pre-impact assessment of conventional housing features and carbon footprint for achieving sustainable built environment. Environment, Development and Sustainability, 24 (6). pp. 8441-8463. ISSN 1387585X

Abdullah, M.J. and Beddu, S. and Manan, T.S.B.A. and Syamsir, A. and Naganathan, S. and Mohd Kamal, N.L. and Mohamad, D. and Itam, Z. and Yee+, H.M. and Mohd Yapandi, M.F.K. and Mohamed Nazri, F. and Shafiq, N. and Isa, M.H. and Ahmad, A. and Wan Rasdi, N. (2022) The Strength and Thermal Properties of Concrete containing Water Absorptive Aggregate from Well-Graded Bottom Ash (BA) as Partial Sand Replacement. Construction and Building Materials, 339. ISSN 09500618

Waqar, A. and Khan, M.B. and Othman, I. and Mansoor, M.S. and Shafiq, N. (2022) A Systematic Literature Review on Risk Analysis of Health and Safety in Oil Refinery and Onshore Pipeline Construction Projects. In: UNSPECIFIED.

Dahim, M. and Farhan, S.A. and Shafiq, N. and Al-Mattarneh, H. and Ismail, R. (2022) Thermal-Energy Performance of Bulk Insulation Coupled with High-Albedo Roof Tiles in Urban Pitched Residential Roof Assemblies in the Hot, Humid Climate. Sustainability (Switzerland), 14 (5). ISSN 20711050

Kamal, N.L.M. and Shafiq, N. and Alaloul, W.S. and Beddu, S. and Abd Manan, T.S.B. (2021) Application of response surface methodology for the optimization of mix design concrete using coal bottom ash as cement replacement material. Lecture Notes in Civil Engineering, 132. pp. 396-404. ISSN 23662557

Haruna, A. and Shafiq, N. and Montasir, O.A. (2021) Building information modelling application for developing sustainable building (Multi criteria decision making approach). Ain Shams Engineering Journal, 12 (1). pp. 293-302. ISSN 20904479

Husna, N. and Farhan, S.A. and Wahab, M.M.A. and Shafiq, N. and Sharif, M.T. and Razak, S.N.A. and Ismail, F.I. (2021) Building-Information-Modelling-Based Thermal-Energy Performance Evaluation of Silica-Aerogel-Incorporated Rigid Board Roof Insulation Material for Residential Buildings in the Tropical Climate of Malaysia. In: UNSPECIFIED.

Chandrasekaran, S. and Jain, A.K. and Shafiq, N. and Wahab, M.M.A. (2021) Design Aids for Offshore Topside Platforms Under Special Loads. CRC Press, pp. 1-310. ISBN 9781000482140; 9781032136844

Husna, N. and Farhan, S.A. and Wahab, M.M.A. and Wahab, M.M.A. and Shafiq, N. and Sharif, M.T. and Razak, S.N.A. and Ismail, I.F. (2021) Effect of Granular Silica Aerogel as Filler on Tensile and Flexural Strengths and Moduli of Stone-Wool-Fibre-Reinforced Composite as Rigid Board Roof Insulation Material. In: UNSPECIFIED.

Razak, S.N.A. and Shafiq, N. and Guillaumat, L. and Wahab, M.M.A. and Farhan, S.A. and Husna, N. and Ismail, F.I. (2021) Effect of Heating Duration at High Temperature on the Strength and Integrity of Fly Ash-Based Geopolymer Concrete. In: UNSPECIFIED.

Abd Razak, S.N. and Guillaumat, L. and Shafiq, N. (2021) Effect of fire flame exposure on basalt and carbon fiber-reinforced concrete. Lecture Notes in Civil Engineering, 132. pp. 573-579. ISSN 23662557

Farhan, S.A. and Ismail, F.I. and Kiwan, O. and Shafiq, N. and Zain-Ahmed, A. and Husna, N. and Hamid, A.I.A. (2021) Effect of roof tile colour on heat conduction transfer, roof-top surface temperature and cooling load in modern residential buildings under the tropical climate of Malaysia. Sustainability (Switzerland), 13 (9). ISSN 20711050

Ahmad, S. and Shafiq, N. and Iqbal, H.W. and Ahmad, R.Z. and Abbas, Z. and Rehman, A.-U. and Ali, M. (2021) Effect of slag on chloride resistance of concrete. Lecture Notes in Civil Engineering, 132. pp. 365-374. ISSN 23662557

Azmee, N. and Abbas, Y.M. and Shafiq, N. and Fares, G. and Osman, M. and Iqbal Khan, M. (2021) Enhancing the microstructure and sustainability of ultra-high-performance concrete using ultrafine calcium carbonate and high-volume fly ash under different curing regimes. Sustainability (Switzerland), 13 (7). ISSN 20711050

Rahman, S.H.A. and Zulkarnain, N.N. and Shafiq, N. (2021) Experimental study and design of experiment using statistical analysis for the development of geopolymer matrix for oil-well cementing for enhancing the integrity. Crystals, 11 (2). ISSN 20734352

Razak, S.N.A. and Shafiq, N. and Guillaumat, L. and Wahab, M.M.A. and Farhan, S.A. and Husna, N. and Ismail, F.I. (2021) Fire Performance of Fly Ash-Based Geopolymer Concrete: Effect of Burning Temperature. In: UNSPECIFIED.

Mohd, S.S.R. and Liew, M.S. and Zawaw, N.A.W.A. and Farhan, S.A. and Shafiq, N. (2021) Green-Building-Index-Assessment-Criteria-Based Comparative Evaluation of Interlocking Blocks as an Alternative to Conventional Masonry for Residential Buildings in Malaysia. In: UNSPECIFIED.

Ismail, F.I. and Farhan, S.A. and Husna, N. and Shafiq, N. and Wahab, M.M.A. and Razak, S.N.A. (2021) Influence of Graphene Nanoplatelets on the Compressive and Split Tensile Strengths of Geopolymer Concrete. In: UNSPECIFIED.

Kumar, R. and Shafiq, N. and Kumar, A. and Jhatial, A.A. (2021) Investigating embodied carbon, mechanical properties, and durability of high-performance concrete using ternary and quaternary blends of metakaolin, nano-silica, and fly ash. Environmental Science and Pollution Research, 28 (35). pp. 49074-49088. ISSN 09441344

Al-Aidrous, A.-H.M.H. and Shafiq, N. and Mohammed, B.S. and Al-Ashmori, Y.Y. and Baarimah, A.O. and Al-Masoodi, A.H.H. (2021) Investigation of the current Innovative Industrialized Building Systems (IBS) in Malaysia. In: UNSPECIFIED.

Ismail, F.I. and Abbas, Y.M. and Shafiq, N. and Fares, G. and Osman, M. and Hussain, L.A. and Khan, M.I. (2021) Investigation of the impact of graphene nanoplatelets (Gnp) on the bond stress of high-performance concrete using pullout testing. Materials, 14 (22). ISSN 19961944

Gardezi, S.S.S. and Shafiq, N. and Hassan, I. and Arshid, M.U. (2021) Life Cycle Carbon Footprint Assessments, Case Study of Malaysian Housing Sector. Environmental and Climate Technologies, 25 (1). pp. 1003-1017. ISSN 22558837

Jalal, A. and Hakim, L. and Shafiq, N. (2021) Mechanical and post-cracking characteristics of fiber reinforced concrete containing copper-coated steel and PVA fibers in 100 cement and fly ash concrete. Applied Sciences (Switzerland), 11 (3). pp. 1-14. ISSN 20763417

Mohammed, M. and Shafiq, N. and Elmansoury, A. and Al-Mekhlafi, A.-B.A. and Rached, E.F. and Zawawi, N.A. and Haruna, A. and Rafindadi, A.D. and Ibrahim, M.B. (2021) Modeling of 3r (Reduce, reuse and recycle) for sustainable construction waste reduction: A partial least squares structural equation modeling (pls-sem). Sustainability (Switzerland), 13 (19). ISSN 20711050

Ismail, F.I. and Farhan, S.A. and Shafiq, N. and Husna, N. and Sharif, M.T. and Affan, S.U. and Veerasenan, A.K. (2021) Nano-porous silica-aerogel-incorporated composite materials for thermal-energy-efficient pitched roof in the tropical region. Applied Sciences (Switzerland), 11 (13). ISSN 20763417

Mohammed, B.S. and Shafiq, N. and Kutty, S.R.M. and Mohamad, H. and Balogun, A.-L. (2021) Preface. Lecture Notes in Civil Engineering, 132. v. ISSN 23662557

Gardezi, S.S.S. and Shafiq, N. (2021) Prospects of a sustainable eol-carbon footprint assessment of a tropical housing habitat. Lecture Notes in Civil Engineering, 132. pp. 545-554. ISSN 23662557

Zulkarnain, N.N. and Farhan, S.A. and Sazali, Y.A. and Shafiq, N. and Abd Rahman, S.H. and Abd Hamid, A.I. and Habarudin, M.F. (2021) Reducing the waiting-on-cement time of geopolymer well cement using calcium chloride (CaCl2) as the accelerator: Analysis of the compressive strength and acoustic impedance for well logging. Sustainability (Switzerland), 13 (11). ISSN 20711050

Manan, T.S.B.A. and Kamal, N.L.M. and Beddu, S. and Khan, T. and Mohamad, D. and Syamsir, A. and Itam, Z. and Jusoh, H. and Basri, N.A.N. and Mohtar, W.H.M.W. and Isa, M.H. and Shafiq, N. and Ahmad, A. and Rasdi, N.W. (2021) Strength enhancement of concrete using incinerated agricultural waste as supplementary cement materials. Scientific Reports, 11 (1). ISSN 20452322

Farhan, S.A. and Shafiq, N. and Husna, N. and Zain-Ahmed, A. and Wahab, M.M.A. and Razak, S.N.A. and Ismail, F.I. (2021) Thermal-Energy Performance of High-Albedo Roof Tiles and Bulk Rafter Insulation in Residential Roof in the Tropical Climate. In: UNSPECIFIED.

Saad, S. and Alaloul, W.S. and Shafiq, N. and Ammad, S. and Qureshi, A.H. and Mohammed, A.A.M. (2021) Visually Programming Automated Slab Positioning Tool (ASPT) using Evolutionary Solvers. In: UNSPECIFIED.

Umar, U.A. and Shafiq, N. and Ahmad, F.A. (2021) A case study on the effective implementation of the reuse and recycling of construction & demolition waste management practices in Malaysia. Ain Shams Engineering Journal, 12 (1). pp. 283-291. ISSN 20904479

Shafiq, N. and Ammar, M.A. (2021) An experimental assessment on the performance of fly ash in concrete. Lecture Notes in Civil Engineering, 132. pp. 458-467. ISSN 23662557

Al-Masoodi, A.H.H. and Alkhatib, F.H. and Shafiq, N. and Al-Aidrous, A.-H.M.H. (2021) A review of the Sustainability and Parametric Design Approach of Complex Tall Buildings at an Early Design Stage. In: UNSPECIFIED.

Haruna, A. and Shafiq, N. and Ali, M.O. and Mohammed, M. and Haruna, S. (2020) Design and construction technique for low embodied energy building: An analytical network process approach. Journal of Engineering and Technological Sciences, 52 (2). pp. 166-180. ISSN 23375779

Haruna, A. and Shafiq, N. and Montasir, O.A. and Haruna, S. and Mohammed, M. (2020) Design, Material Selection and Manufacturing for Sustainable Construction: An Analytical Network Process Approach. In: UNSPECIFIED.

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Liew, M.S. (2020) Durability performance of high volume fly ash roller compacted concrete pavement containing crumb rubber and nano silica. International Journal of Pavement Engineering, 21 (12). pp. 1437-1444. ISSN 10298436

Razak, S.N.A. and Shafiq, N. and Azmi, Y.M. and Guillaumat, L. and Farhan, S.A. and Ayesha, W.F. and Grampeix, G. (2020) Effect of fire flame exposure on basalt and carbon fiber reinforced concrete. In: UNSPECIFIED.

Zahid, M. and Shafiq, N. (2020) Effects of sand/fly ash and the water/solid ratio on the mechanical properties of engineered geopolymer composite and mix design optimization. Minerals, 10 (4). ISSN 2075163X

Hamid, M.S.A. and Shafiq, N. and Kiwan, O. (2020) Establishing the correlations for eco-efficiency index of various types of structural concrete used in the malaysian housing using response surface method. Applied Sciences (Switzerland), 10 (12). ISSN 20763417

Jani, N.M. and Nasif, M.S. and Shafiq, N. and Holt, I. (2020) Experimental investigation on the effect of varying fiber mix proportion on the mechanical and thermal performances of fiber-reinforced self-compacting concrete under hydrocarbon fire condition. Applied Sciences (Switzerland), 10 (13). ISSN 20763417

Al-Nini, A. and Nikbakht, E. and Syamsir, A. and Shafiq, N. and Mohammed, B.S. and Al-Fakih, A. and Al-Nini, W. and Amran, Y.H.M. (2020) Flexural behavior of double-skin steel tube beams filled with fiber-reinforced cementitious composite and strengthened with CFRP sheets. Materials, 13 (14). ISSN 19961944

Isa, M.H. and Wong, L.-P. and Bashir, M.J.K. and Shafiq, N. and Kutty, S.R.M. and Farooqi, I.H. and Lee, H.C. (2020) Improved anaerobic digestion of palm oil mill effluent and biogas production by ultrasonication pretreatment. Science of the Total Environment, 722. ISSN 00489697

Zahid, M. and Shafiq, N. and Razak, S.N.A. and Tufail, R.F. (2020) Investigating the effects of NaOH molarity and the geometry of PVA fibers on the post-cracking and the fracture behavior of engineered geopolymer composite. Construction and Building Materials, 265. ISSN 09500618

Rahman, S.H.B.A. and Irawan, S. and Shafiq, N. and Rajeswary, R. (2020) Investigating the expansion characteristics of geopolymer cement samples in a water bath and compared with the expansion of ASTM Class-G cement. Heliyon, 6 (2). ISSN 24058440

Khan, S.U. and Ayub, T. and Shafiq, N. (2020) Physical and Mechanical Properties of Concrete with Locally Produced Metakaolin and Micro-silica as Supplementary Cementitious Material. Iranian Journal of Science and Technology - Transactions of Civil Engineering, 44 (4). pp. 1199-1207. ISSN 22286160

Azmee, N.M. and Shafiq, N. (2020) Preparation of low cement ultra-high performance concrete. Lecture Notes in Civil Engineering, 54. pp. 331-336. ISSN 23662557

Mohammed, M. and Shafiq, N. and Abdallah, N.A.W. and Ayoub, M. and Haruna, A. (2020) A review on achieving sustainable construction waste management through application of 3R (reduction, reuse, recycling): A lifecycle approach. In: UNSPECIFIED.

Hamid, M.S.A. and Shafiq, N. and Musir, A.A. and Rosseli, S.R. (2019) Classification of reinforced concrete single story and double story house using eco-efficiency index approach. In: UNSPECIFIED.

Hamid, M.S.A. and Jasni, O.O. and Shafiq, N. (2019) Eco-efficiency index analysis of single story structure of reinforced concrete house using economical and environmental score approach. In: UNSPECIFIED.

Shafiq, N. and Kumar, R. and Zahid, M. and Tufail, R.F. (2019) Effects of modified metakaolin using nano-silica on the mechanical properties and durability of concrete. Materials, 12 (14). ISSN 19961944

Jalal, A. and Shafiq, N. and Zahid, M. (2019) Investigating the effects of fiber reinforced concrete on the performance of end-zone of pre-stressed beams. Materials, 12 (13). ISSN 19961944

Azmee, N.M. and Shafiq, N. (2019) Investigating the impacts of ultra-fine calcium carbonate in high-volume fly ash concrete for structural rehabilitation for sustainable development. Sustainability (Switzerland), 11 (17). ISSN 20711050

Gardezi, S.S.S. and Shafiq, N. (2019) Operational carbon footprint prediction model for conventional tropical housing: a Malaysian prospective. International Journal of Environmental Science and Technology, 16 (12). pp. 7817-7826. ISSN 17351472

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2018) Abrasion Resistance of Nano Silica Modified Roller Compacted Rubbercrete: Cantabro Loss Method and Response Surface Methodology Approach. In: UNSPECIFIED.

Saad, S.A. and Shafiq, N. and Ali, M. and Osman, M.M. (2018) Analysis by means of surface response to chemical composition and pozzolanic reactivity of ultrafine treated rice husk ash (UFTRHA) as cementing additive material. International Journal of Engineering and Technology(UAE), 7 (4). pp. 342-346. ISSN 2227524X

Haruna, A. and Shafiq, N. and Montasir, O.A. and Haruna, S. (2018) Barriers for developing Building with low embodied energy multi criteria decision making approach. International Journal of Engineering and Technology(UAE), 7 (4). pp. 3126-3130. ISSN 2227524X

Yahya, A.A. and Ali, N. and Mohd Kamal, N.L. and Shahidan, S. and Beddu, S. and Nuruddin, M.F. and Shafiq, N. (2018) Characterization of coal bottom ash (CBA) heavy metal element after acid leaching treatment. Malaysian Construction Research Journal, 4 (2 Spec). pp. 141-151. ISSN 19853807

Sivapalan, S. and Afsharian, A. and Shafiq, N. and Nuruddin, F.B. and Sivapalan, M. (2018) Communicating Sustainability: Context Matters. In: UNSPECIFIED.

Saad, S.A. and Shafiq, N. and Osman, M.M. and Masjuki, S.A. (2018) Compressive strength and microstructure analysis of treated rice husk ash (TRHA) incorporated mortar. International Journal of Engineering and Technology(UAE), 7 (4). pp. 388-391. ISSN 2227524X

Othman, I. and Harahap, M.I.P. and Mohamad, H. and Shafiq, N. and Napiah, M. (2018) Development of BIM-Based Safety Management Model Focusing on Safety Rule Violations. In: UNSPECIFIED.

Othman, I. and Ghani, S.N. and Mohamad, H. and Alalou, W. and Shafiq, N. (2018) Early Warning Signs of Project Failure. In: UNSPECIFIED.

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Shahir Liew, M. (2018) Effect of crumb rubber and nano silica on the fatigue performance of roller compacted concrete pavement. Cogent Engineering, 5 (1). ISSN 23311916

Othman, I. and Shafiq, N. and Nuruddin, M.F. (2018) Effective Safety Management in Construction Project. In: UNSPECIFIED.

Fazli, H. and Mohd Yassin, A.Y. and Shafiq, N. and Teo, W. (2018) Effective bond length of CFRP sheets externally bonded to concrete beams under marine environment. Construction and Building Materials, 167. pp. 726-738. ISSN 09500618

Shafiq, N. and Hussein, A.A.E. and Nuruddin, M.F. and Al Mattarneh, H. (2018) Effects of sugarcane bagasse ash on the properties of concrete. Proceedings of the Institution of Civil Engineers: Engineering Sustainability, 171 (3). pp. 123-132. ISSN 14784629

Shafiq, N. and Choo, C.S. and Isa, M.H. (2018) Effects of used engine oil on slump, compressive strength and oxygen permeability of normal and blended cement concrete. Construction and Building Materials, 187. pp. 178-184. ISSN 09500618

Hamid, M.S.A. and Shafiq, N. (2018) Factors affecting the eco-efficiency design of reinforced concrete structure of low-rise and high-rise residential house in Malaysia. In: UNSPECIFIED.

Ayub, T. and Khan, S.U. and Shafiq, N. (2018) Flexural modelling and finite element analysis of frc beams reinforced with PVA and basalt fibres and their validation. Advances in Civil Engineering, 2018. ISSN 16878086

Othman, I. and Ibrahim, M.F.H. and Shafiq, N. and Mohamad, H. and Kamil, M.S. (2018) HSE Management System for Hotwork Operation at High Elevation in Shipbuilding Project. In: UNSPECIFIED.

Othman, I. and Azlam, M.H. and Mohamad, H. and Shafiq, N. and Napiah, M. (2018) Identification of Good China Steel Manufacturer for Industry. In: UNSPECIFIED.

Zahid, M. and Shafiq, N. and Jalal, A. (2018) Investigating the effects of solarcure curing method on the compressive strength, microstructure and polymeric reaction of fly ash based geopolymer. Construction and Building Materials, 181. pp. 227-237. ISSN 09500618

Umar, U.A. and Shafiq, N. and Isa, M.H. (2018) Investigation of construction wastes generated in the Malaysian residential sector. Waste Management and Research, 36 (12). pp. 1157-1165. ISSN 0734242X

Saad, S.A. and Shafiq, N. and Ali, M. (2018) PHYSICOCHEMICAL PROPERTIES AND POZZOLANIC PERFORMANCE OF ULTRAFINE TREATED RICE HUSK ASH (UFTRHA) AS ADDITIVE IN CONCRETE. Planning Malaysia, 16 (2). pp. 314-323. ISSN 16756215

Saad, S.A. and Shafiq, N. and Ali, M. (2018) Physicochemical properties and pozzolanic performance of ultrafine treated rice husk ash (uftrha) as additive in concrete. Planning Malaysia, 16 (2). pp. 285-292. ISSN 16756215

Fazli, H. and Yassin, A.Y.M. and Shafiq, N. and Teo, W. (2018) Pull-off testing as an interfacial bond strength assessment of CFRP-concrete interface exposed to a marine environment. International Journal of Adhesion and Adhesives, 84. pp. 335-342. ISSN 01437496

Othman, I. and Shafiq, N. and Nuruddin, M.F. (2018) Quality planning in Construction Project. In: UNSPECIFIED.

Shafiq, N. and Gardezi, S.S.S. and Nuruddin, M.F. and Abdullah Zawawi, N.A.W. (2018) Recurrent carbon footprint assessment and forecasting for conventional housing in tropical regions: A Malaysian case study. Environmental Progress and Sustainable Energy, 37 (2). pp. 839-849. ISSN 19447442

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Shahir Liew, M. (2018) Skid Resistance of nano silica modified roller compacted rubbercrete for pavement applications: Experimental methods and response surface methodology. Cogent Engineering, 5 (1). ISSN 23311916

Zahid, M. and Shafiq, N. and Isa, M.H. and Gil, L. (2018) Statistical modeling and mix design optimization of fly ash based engineered geopolymer composite using response surface methodology. Journal of Cleaner Production, 194. pp. 483-498. ISSN 09596526

Othman, I. and Shafiq, N. and Nuruddin, M.F. (2018) Time Overrun in Construction Project. In: UNSPECIFIED.

Azmee, N.M. and Shafiq, N. (2018) Ultra-high performance concrete: From fundamental to applications. Case Studies in Construction Materials, 9. ISSN 22145095

Othman, I. and Majid, R. and Mohamad, H. and Shafiq, N. and Napiah, M. (2018) Variety of Accident Causes in Construction Industry. In: UNSPECIFIED.

Hammad, D.B. and Shafiq, N. and Nuruddin, M.F. (2018) Vectors of Defects in Reinforced Concrete Structures in Onshore Oil and Gas Process Plants. Advances in Civil Engineering, 2018. ISSN 16878086

Kusbiantoro, A. and Embong, R. and Shafiq, N. (2017) Adaptation of eco-friendly approach in the production of soluble pozzolanic material. International Journal of Design and Nature and Ecodynamics, 12 (2). pp. 246-253. ISSN 17557437

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Effect of Mineral Filler type on Strength of Roller Compacted Rubbercrete for Pavement Applications. In: UNSPECIFIED.

Zahid, M. and Shafiq, N. and Nuruddin, M.F. and Nikbakht, E. and Jalal, A. (2017) Effect of partial replacement of fly ash by metakaolin on strength development of fly ash based geopolymer mortar. Key Engineering Materials, 744 74. pp. 131-135. ISSN 10139826

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Effect of polycarboxylate superplasticizer dosage on the mechanical performance of roller compacted Rubbercrete for pavement applications. Journal of Engineering and Applied Sciences, 12 (20). pp. 5253-5260. ISSN 1816949X

Shafiq, N. and Nuruddin, M.F. (2017) Effectiveness of adhesive bonding in structural steel connections. In: UNSPECIFIED.

Mohammed, B.S. and Adamu, M. and Shafiq, N. (2017) Establishing relationship between modulus of elasticity and strength of nano silica modified roller compacted rubbercrete. International Journal of GEOMATE, 13 (39). pp. 103-110. ISSN 21862982

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Evaluating the effect of superplasticizer on the properties of roller compacted concrete using response surface methodology. ARPN Journal of Engineering and Applied Sciences, 12 (21). pp. 6206-6215. ISSN 18196608

Kumar, R. and Mohd Yaseen, A.Y.B. and Shafiq, N. and Jalal, A. (2017) Influence of metakaolin, fly ash and nano silica on mechanical and durability properties of concrete. Key Engineering Materials, 744 74. pp. 8-14. ISSN 10139826

Mahmoud, L. and Shafiq, N. and Fadhil, M. and Thanoon, W. (2017) Interaction between CFRP side plated to R C beams and concrete under shear action. In: UNSPECIFIED.

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Mechanical performance of roller compacted rubbercrete with different mineral filler. Jurnal Teknologi, 79 (6). pp. 75-88. ISSN 01279696

Jalal, A. and Shafiq, N. and Nikbakht, E. and Kumar, R. and Zahid, M. (2017) Mechanical properties of hybrid basalt-polyvinyl alcohol (PVA) fiber reinforced concrete. Key Engineering Materials, 744 74. pp. 3-7. ISSN 10139826

Yahya, A.A. and Ali, N. and Mohd Kamal, N.L. and Shahidan, S. and Beddu, S. and Nuruddin, M.F. and Shafiq, N. (2017) Reducing Heavy Metal Element from Coal Bottom Ash by Using Citric Acid Leaching Treatment. In: UNSPECIFIED.

Mohd Jani, N. and Shakir Nasif, M. and Shafiq, N. and Pao, W. (2017) Thermal and strength performance of reinforced self-compacting concrete slabs mixed with basalt and PVA fibers in high intensity fire. In: UNSPECIFIED.

Muhd, F.N. and Amir, F. and Mohamed, M.A.W. and Shafiq, N. and Malkawi, A.B. (2017) Utilization of eafd in concrete composite. Materials Science Forum, 894 MS. pp. 72-75. ISSN 02555476

Fazli, H. and Yassin, A.Y.M. and Shafiq, N. and Wee, T. (2017) The behavior of Carbon Fiber Reinforced Polymer (CFRP) strengthened beams under a marine environment. International Journal of GEOMATE, 13 (39). pp. 179-184. ISSN 21862982

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Khamidi, M.F. (2017) A review on adoption of novel techniques in construction waste management and policy. Journal of Material Cycles and Waste Management, 19 (4). pp. 1361-1373. ISSN 14384957

Mohammed, B.S. and Adamu, M. and Shafiq, N. (2017) A review on the effect of crumb rubber on the properties of rubbercrete. International Journal of Civil Engineering and Technology, 8 (9). pp. 599-615. ISSN 09766308

Shafiq, N. and Ayub, T. and Khan, S.U. (2016) 3D nonlinear finite element analysis of HPFRC beams containing PVA fibers. In: UNSPECIFIED.

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Farhan, S.A. and Salihi, I.U. (2016) Application of structural building information modeling (S-BIM) for sustainable buildings design and waste reduction: A review. International Journal of Applied Engineering Research, 11 (2). pp. 1523-1532. ISSN 09734562

Chin, S.C. and Shafiq, N. and Nuruddin, M.F. (2016) Behaviour of RC beams with CFRP-strengthened openings. Structural Concrete, 17 (1). pp. 32-43. ISSN 14644177

Shafiq, N. and Nuruddin, M.F. and Elshekh, A.E.A. (2016) Behaviour of structural properties of fiber reinforced high strength concrete beams subjected to static loads. In: UNSPECIFIED.

Hamid, M.S.A. and Shafiq, N. and Zawawi, N.A. and Nuruddin, M.F. and Khamidi, M.F. and Shaharmi, M.S.H.M. (2016) Carbon emission analysis of double storey reinforced concrete house in Malaysia. In: UNSPECIFIED.

Al-Mattarneh, H.M. and Ismail, R.M.A. and Nuruddin, M.F. and Shafiq, N. and Dahim, M.A. (2016) Characterization of Pb and Cd contaminated sandy soil by dielectric means. In: UNSPECIFIED.

Ayub, T. and Shafiq, N. and Khan, S.U. (2016) Compressive stress-strain behavior of HSFRC reinforced with basalt fibers. Journal of Materials in Civil Engineering, 28 (4). ISSN 08991561

Mohammed, B.S. and Nuruddin, M.F. and Shafiq, N. (2016) Development of high strength nano-silica modified rubbercrete. In: UNSPECIFIED.

Mahamood, N. and Mohammed, B.S. and Shafiq, N. and Eisa, S.M.B. (2016) Development of nano silica modified solid rubbercrete bricks. In: UNSPECIFIED.

Saad, S.A. and Nuruddin, M.F. and Shafiq, N. and Ali, M. (2016) The Effect of Incineration Temperature to the Chemical and Physical Properties of Ultrafine Treated Rice Husk Ash (UFTRHA) as Supplementary Cementing Material (SCM). In: UNSPECIFIED.

Embong, R. and Shafiq, N. and Kusbiantoro, A. and Nuruddin, M.F. (2016) Effectiveness of low-concentration acid and solar drying as pre-treatment features for producing pozzolanic sugarcane bagasse ash. Journal of Cleaner Production, 112. pp. 953-962. ISSN 09596526

Gardezi, S.S.S. and Shafiq, N. and Nuruddin, M.F. and Zawawi, N.A. and Khamidi, F.B. (2016) Factors affecting the embodied carbon footprint potential�Assessment of conventional Malaysian housing habitat. In: UNSPECIFIED.

Setvati, M.R. and Mustaffa, Z. and Shafiq, N. and Isnadi, B. and Syed, Z.I. (2016) Finite element modeling of wet lay-up CFRP patch repaired corroded offshore steel jacket member. In: UNSPECIFIED.

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Khamidi, M.F. and Salihi, I.U. (2016) Impact of construction waste minimization at construction site: Case study. Jurnal Teknologi, 78 (5-3). pp. 33-40. ISSN 01279696

Shafiq, N. and Ayub, T. and Khan, S.U. (2016) Investigating the performance of PVA and basalt fibre reinforced beams subjected to flexural action. Composite Structures, 153. pp. 30-41. ISSN 02638223

Setvati, M.R. and Mustaffa, Z. and Isnadi, B. and Shafiq, N. and Syed, Z.I. and Kim, D.K. (2016) Meso-scale numerical study of composite patch repaired hole drilled steel plate. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1724-1728. ISSN 18196608

Nuruddin, M.F. and Saad, S.A. and Shafiq, N. and Ali, M. (2016) Milling time influence of ultrafine treated rice husk ash to pozzolanic reactivity in portlandite. In: UNSPECIFIED.

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2016) Nano silica modified roller compacted rubbercrete � an overview. In: UNSPECIFIED.

Farhan, S.A. and Shafiq, N. and Azizli, K.A.M. and Soon, F.K. and Jie, L.C. (2016) Optimization of residential roof design using system dynamics and building information modelling. In: UNSPECIFIED.

Pakpahan, E.N. and Shafiq, N. and Isa, M.H. and Kutty, S.R.M. and Mustafa, M.R. (2016) Petroleum sludge thermal treatment and use in cement replacement � A solution towards sustainability. In: UNSPECIFIED.

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Salihi, I.U. (2016) Ranking of principal causes of construction waste for malaysian residential project. In: UNSPECIFIED.

Embong, R. and Shafiq, N. and Kusbiantoro, A. (2016) Silica extraction and incineration process of sugarcane bagasse ash (SCBA) as pozzolanic materials: A review. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7304-7308. ISSN 18196608

Embong, R. and Kusbiantoro, A. and Shafiq, N. and Nuruddin, M.F. (2016) Strength and microstructural properties of fly ash based geopolymer concrete containing high-calcium and water-absorptive aggregate. Journal of Cleaner Production, 112. pp. 816-822. ISSN 09596526

Kamal, N.L.B.M. and Hayder, G. and Ahmed, O.A. and Beddu, S.B. and Nuruddin, M.F. and Shafiq, N. (2016) Sustainable waste management of bottom ash as cement replacement in green building. In: UNSPECIFIED.

Gardezi, S.S.S. and Shafiq, N. and Zawawi, N.A.W.A. and Khamidi, M.F. and Farhan, S.A. (2016) A multivariable regression tool for embodied carbon footprint prediction in housing habitat. Habitat International, 53. pp. 292-300. ISSN 01973975

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Khamidi, M.F. and Farhan, S.A. and Gardezi, S.S.S. (2015) 4D BIM application in AEC industry: Impact on integrated project delivery. Research Journal of Applied Sciences, Engineering and Technology, 10 (5). pp. 547-552. ISSN 20407459

Shafiq, N. and Nuruddin, M.F. and Khan, S.U. and Ayub, T. (2015) Calcined kaolin as cement replacing material and its use in high strength concrete. Construction and Building Materials, 81. pp. 313-323. ISSN 09500618

Shafiq, N. and Nurrudin, M.F. and Gardezi, S.S.S. and Kamaruzzaman, A.B. (2015) Carbon footprint assessment of a typical low rise office building in Malaysia using building information modelling (BIM). International Journal of Sustainable Building Technology and Urban Development, 6 (3). pp. 157-172. ISSN 2093761X

Hussein, A.A.E. and Shafiq, N. and Nuruddin, M.F. (2015) Compressive strength and interfacial transition zone of sugar cane bagasse ash concrete: A comparison to the established pozzolans. In: UNSPECIFIED.

Shafiq, N. and Fadhilnuruddin, M. and Elshekh, A.E.A. and Fathi, A. (2015) Correlation between compressive strength and ultrasonic pulse velocity of high strength concrete incorporating chopped basalt fibre. In: UNSPECIFIED.

Chin, S.C. and Shafiq, N. and Nuruddin, M.F. (2015) FRP as strengthening material for Reinforced Concrete beams with openings � A review. KSCE Journal of Civil Engineering, 19 (1). pp. 213-219. ISSN 12267988

Nuruddin, M.F. and Memon, F.A. and Demie, S. and Shafiq, N. (2015) Influence of water-to-geopolymer solids ratio and curing time on the properties of self-compacting geopolymer concrete. Malaysian Construction Research Journal, 13 (2). pp. 29-38. ISSN 19853807

Khan, S.U. and Shafiq, N. and Ayub, T. (2015) Microstructure characteristics of concrete incorporating metakaolin and PVA fibers and influence on the compressive strength. In: UNSPECIFIED.

Gardezi, S.S.S. and Shafiq, N. and Abdullah, N.A.W. and Khamidi, M.F. and Farhan, S.A. (2015) Minimization of embodied carbon footprint from housing sector of Malaysia. Chemical Engineering Transactions, 45. pp. 1927-1932. ISSN 22839216

Shafiq, N. and Nuruddin, M.F. and Safdar Gardezi, S.S. and Farhan, S.A. and Al Rawy, H.A.M. (2015) Reduction of embodied CO2 emissions from conventional single storey house in malaysia by recycled materials using building information modeling (BIM). Advances in Environmental Biology, 9 (1). pp. 17-21. ISSN 19950756

Nuruddin, M.F. and Ullah Khan, S. and Shafiq, N. and Ayub, T. (2015) Strength prediction models for PVA fiber-reinforced high-strength concrete. Journal of Materials in Civil Engineering, 27 (12). ISSN 08991561

Ayub, T. and Shafiq, N. and Nuruddin, M.F. (2014) Analytical prediction of the mechanical properties of high performance PVA fiber reinforced concrete. Applied Mechanics and Materials, 567. pp. 345-350. ISSN 16609336

Gardezi, S.S.S. and Shafiq, N. and Nurudinn, M.F. and Farhan, S.A. and Umar, U.A. (2014) Challenges for implementation of building information modeling (BIM) in Malaysian construction industry. Applied Mechanics and Materials, 567. pp. 559-564. ISSN 16609336

Shafiq, N. and Nuruddin, M.F. and Salih, A.F.M. and Elshekh, A.E.A. (2014) Characterization of stand chopped basalt fiber self - Compacting reinforced concrete (SCB-SCC). Applied Mechanics and Materials, 567. pp. 356-361. ISSN 16609336

Salih, A.F.M. and Shafiq, N. and Nuruddin, M.F. and Elheber, A. and Memon, F.A. (2014) Comparison of the effects of different fibers on the properties of self-compacting concrete. Research Journal of Applied Sciences, Engineering and Technology, 7 (16). pp. 3332-3341. ISSN 20407459

Hussein, A.A.E. and Shafiq, N. and Nuruddin, M.F. and Memon, F.A. (2014) Compressive strength and microstructure of sugar cane bagasse ash concrete. Research Journal of Applied Sciences, Engineering and Technology, 7 (12). pp. 2569-2577. ISSN 20407459

Hammad, D.B. and Shafiq, N. and Nuruddin, M.F. and Sodangi, M. and Ahmed, U.A. (2014) Criticality analysis of defects in civil engineering structures: Case of onshore process plant. In: UNSPECIFIED.

Hammad, D.B. and Shafiq, N. and Nuruddin, M.F. (2014) Criticality index of building systems using multi-criteria decision analysis technique. In: UNSPECIFIED.

Nuruddin, M.F. and Memon, F.A. and Shafiq, N. and Demie, S. (2014) Drying shrinkage of fly ash-based self-compacting geopolymer concrete. Applied Mechanics and Materials, 567. pp. 362-368. ISSN 16609336

Shafiq, N. and Elhameed, A.A. and Nuruddin, M.F. (2014) Durability of sugar cane bagasse ash (SCBA) concrete towards chloride ion penetration. Applied Mechanics and Materials, 567. pp. 369-374. ISSN 16609336

Nuruddin, M.F. and Khan, S.U. and Shafiq, N. (2014) Effect of calcined kaolin on the mechanical properties of high-strength concrete as cement replacing material. Applied Mechanics and Materials, 567. pp. 375-380. ISSN 16609336

Shafiq, N. and Nuruddin, M.F. and Elshekh, A.E.A. and Salih, A.F.M. (2014) Effect of chopped basalt fiber on the fresh and hardened properties of fly ash high strength concrete. Applied Mechanics and Materials, 567. pp. 381-386. ISSN 16609336

Ayub, T. and Shafiq, N. and Nuruddin, M.F. (2014) Effect of chopped basalt fibers on the mechanical properties and microstructure of high performance fiber reinforced concrete. Advances in Materials Science and Engineering, 2014. ISSN 16878434

Khan, S.U. and Nuruddin, M.F. and Shafiq, N. and Ayub, T. (2014) Effect of metakaolin and PVA fibres on the workability and mechanical properties of concrete. Advanced Materials Research, 935. pp. 188-192. ISSN 10226680

Hussein, A.A.E. and Shafiq, N. and Nuruddin, M.F. (2014) Effect of microwave incinerated rice husk ash (MIRHA) on workability and compressive strength of concrete. Advanced Materials Research, 935. pp. 193-196. ISSN 10226680

Khan, S.U. and Nuruddin, M.F. and Ayub, T. and Shafiq, N. (2014) Effects of different mineral admixtures on the properties of fresh concrete. The Scientific World Journal, 2014. ISSN 1537744X

Imran, M. and Shafiq, N. and Akbar, I. (2014) Effects of eccentric load on un-strengthen and CFRP strengthened RC beams. Advanced Materials Research, 935. pp. 229-232. ISSN 10226680

Farhan, S.A. and Shafiq, N. and Azizli, K.A.M. and Umar, U.A. and Gardezi, S.S.S. (2014) Embodied carbon of buildings: Tools, methods and strategies. Applied Mechanics and Materials, 567. pp. 565-570. ISSN 16609336

Gardezi, S.S.S. and Shafiq, N. and Zawawi, N.A.W.A. and Farhan, S.A. (2014) Embodied carbon potential of conventional construction materials used in typical malaysian single storey low cost house using building information modeling (BIM). Advanced Materials Research, 1043. pp. 242-246. ISSN 10226680

Ahyudanari, E. and Shafiq, N. and Kamaruddin, I. (2014) Identification and modelling process of defining temperature gradient in airport pavement. Aviation, 18 (2). pp. 72-79. ISSN 16487788

Ayub, T. and Shafiq, N. and Nuruddin, M.F. (2014) Mechanical properties of high-performance concrete reinforced with basalt fibers. In: UNSPECIFIED.

Mohd Kamal, N.L. and Beddu, S. and Nuruddin, M.F. and Shafiq, N. and Muda, Z.C. (2014) Microwave incinerated rice husk ash (MIRHA) and used engine oil (UEO): Towards sustainable concrete production. Applied Mechanics and Materials, 567. pp. 434-439. ISSN 16609336

Shafiq, N. and Ayub, T. and Nuruddin, M.F. (2014) Predictive stress-strain models for high strength concrete subjected to uniaxial compression. Applied Mechanics and Materials, 567. pp. 476-481. ISSN 16609336

Chin, S.C. and Shafiq, N. and Kusbiantoro, A. and Nuruddin, M.F. (2014) Reinforced concrete deep beams with openings strengthened using FRP � A review. Advanced Materials Research, 1025-1. pp. 938-943. ISSN 10226680

Khan, S.U. and Nuruddin, M.F. and Shafiq, N. (2014) Strength development of concrete incorporating metakaolin and PVA fibres. Applied Mechanics and Materials, 567. pp. 505-510. ISSN 16609336

Nuruddin, M.F. and Khan, S.U. and Shafiq, N. and Ayub, T. (2014) Strength development of high-strength ductile concrete incorporating Metakaolin and PVA fibers. The Scientific World Journal, 2014. ISSN 1537744X

Imran, M. and Shafiq, N. and Akbar, I. (2014) Strengthening schemes for flexure and torsion using FRP laminates: A state of art review. Applied Mechanics and Materials, 567. pp. 511-516. ISSN 16609336

Ayub, T. and Shafiq, N. and Fadhil Nuruddin, M. (2014) Stress-strain response of high strength concrete and application of the existing models. Research Journal of Applied Sciences, Engineering and Technology, 8 (10). pp. 1174-1190. ISSN 20407459

Elshekh, A.E.A. and Shafiq, N. and Nuruddin, M.F. and Fathi, A. and Memom, F.A. (2014) An experimental study on the effectiveness of chopped basalt fiber on the fresh and hardened properties of high strength concrete. Research Journal of Applied Sciences, Engineering and Technology, 7 (16). pp. 3304-3311. ISSN 20407459

Shafiq, N. and Imran, M. and Akbar, I. (2014) An experimental study on the effects of biaxial bending due to eccentric load on RC beam. Applied Mechanics and Materials, 567. pp. 339-344. ISSN 16609336

Setvati, M.R. and Shafiq, N. and Mustaffa, Z. and Syed, Z.I. (2014) A review on composite materials for offshore structures. In: UNSPECIFIED.

Nuruddin, Muhd.F. and Yung, C.K. and Azmee, N.M. and Shafiq, N. (2014) A review on ductile self compacting concrete. Key Engineering Materials, 594-59. pp. 433-438. ISSN 10139826

Memon, F.A. and Nuruddin, M.F. and Shafiq, N. (2013) Effect of silica fume on the fresh and hardened properties of fly ash-based self-compacting geopolymer concrete. International Journal of Minerals, Metallurgy and Materials, 20 (2). pp. 205-213. ISSN 16744799

Memon, F.A. and Nuruddin, M.F. and Khan, S. and Shafiq, N. and Ayub, T. (2013) Effect of sodium hydroxide concentration on fresh properties and compressive strength of self-compacting geopolymer concrete. Journal of Engineering Science and Technology, 8 (1). pp. 44-56. ISSN 18234690

Choo, C.-S. and Shafiq, N. and Nuruddin, F.M. (2013) Effects of large openings in the shear zone of reinforced concrete beams. Malaysian Construction Research Journal, 13 (2). pp. 15-27. ISSN 19853807

Demie, S. and Nuruddin, M.F. and Shafiq, N. (2013) Effects of micro-structure characteristics of interfacial transition zone on the compressive strength of self-compacting geopolymer concrete. Construction and Building Materials, 41. pp. 91-98. ISSN 09500618

Elshekh, A.E.A. and Shafiq, N. and Nuruddin, M.F. and Fathi, A. (2013) Mechanical properties of high strength concrete using fly ash. In: UNSPECIFIED.

Fathi, A. and Shafiq, N. and Nuruddin, M.F. and Elheber, A. (2013) Study the effectiveness of the different pozzolanic material on self-compacting concrete. ARPN Journal of Engineering and Applied Sciences, 8 (4). pp. 299-305. ISSN 18196608

Memon, F.A. and Nuruddin, M.F. and Demie, S. and Shafiq, N. (2012) Effect of superplasticizer and extra water on workability and compressive strength of self-compacting geopolymer concrete. Research Journal of Applied Sciences, Engineering and Technology, 4 (5). pp. 407-414. ISSN 20407459

Kurniawan, A. and Shafiq, N. (2012) Optimizing napthalene based superplasticizer content for optimum rheology and strength of self compacting concrete containing fly ash and MIRHA. In: UNSPECIFIED.

Chin, S.C. and Shafiq, N. and Nuruddin, M.F. (2012) Strengthening of RC beams with large openings in shear by CFRP laminates: Experiment and 2D nonlinear finite element analysis. Research Journal of Applied Sciences, Engineering and Technology, 4 (9). pp. 1172-1180. ISSN 20407459

Kusbiantoro, A. and Nuruddin, M.F. and Shafiq, N. and Qazi, S.A. (2012) The effect of microwave incinerated rice husk ash on the compressive and bond strength of fly ash based geopolymer concrete. Construction and Building Materials, 36. pp. 695-703. ISSN 09500618

Nuruddin, M.F. and Kusbiantoro, A. and Qazi, S. and Shafiq, N. (2011) Compressive strength and interfacial transition zone characteristic of geopolymer concrete with different cast in-situ curing conditions. World Academy of Science, Engineering and Technology, 73. pp. 892-895. ISSN 2010376X

Nuruddin, M.F. and Kusbiantoro, A. and Qazi, S. and Shafiq, N. (2011) Compressive strength and interfacial transition zone characteristic of geopolymer concrete with different cast in-situ curing conditions. World Academy of Science, Engineering and Technology, 73. pp. 431-434. ISSN 2010376X

Fareed Ahmed, M. and Fadhil Nuruddin, M. and Shafiq, N. (2011) Compressive strength and workability characteristics of low-calcium fly ash-based self-compacting geopolymer concrete. World Academy of Science, Engineering and Technology, 74. pp. 8-14. ISSN 2010376X

Shafiq, N. (2011) Degree of hydration and compressive strength of conditioned samples made of normal and blended cement system. KSCE Journal of Civil Engineering, 15 (7). pp. 1253-1257. ISSN 12267988

Memon, F.A. and Nuruddin, M.F. and Demie, S. and Shafiq, N. (2011) Effect of curing conditions on strength of fly ash-based self-compacting geopolymer concrete. World Academy of Science, Engineering and Technology, 80. pp. 860-863. ISSN 2010376X

Nuruddin, M.F. and Demie, S. and Shafiq, N. (2011) Effect of mix composition on workability and compressive strength of self-compacting geopolymer concrete. Canadian Journal of Civil Engineering, 38 (11). pp. 1196-1203. ISSN 03151468

Nuruddin, M.F. and Demie, S. and Ahmed, M.F. and Shafiq, N. (2011) Effect of superplasticizer and NaOH molarity on workability, compressive strength and microstructure properties of self-compacting geopolymer concrete. World Academy of Science, Engineering and Technology, 51. pp. 907-914. ISSN 2010376X

Demie, S. and Nuruddin, M.F. and Ahmed, M.F. and Shafiq, N. (2011) Effects of curing temperature and superplasticizer on workability and compressive strength of self-compacting geopolymer concrete. In: UNSPECIFIED.

Nuruddin, M.F. and Qazi, S.A. and Kusbiantoro, A. and Shafiq, N. (2011) Utilisation of waste material in geopolymeric concrete. Proceedings of Institution of Civil Engineers: Construction Materials, 164 (6). pp. 315-327. ISSN 1747650X

Shafiq, N. and Silvianita (2010) Prioritizing the pipeline maintenance approach using analytical hierarchical process. International Review of Mechanical Engineering, 4 (3). pp. 346-352. ISSN 19708734

Mahmoud, L. and Shafiq, N. and Nureldin, M.F. and Thanoon, A.M.W. (2009) Fatigue behaviour of CFRP concrete joints under shear. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 162 (5). pp. 355-364. ISSN 09650911

Mahmoud, L. and Shafiq, N. and Fadhil, M. and Thanoon, W. (2008) Interfacial behavior of side plated CFRP-to-concrete joints under cyclic shear loading. In: UNSPECIFIED.

Shafiq, N. and Nuruddin, M.F. and Kamaruddin, I. (2007) Comparison of engineering and durability properties of fly ash blended cement concrete made in UK and Malaysia. Advances in Applied Ceramics, 106 (6). pp. 314-318. ISSN 17436753

Shafiq, N. and Cabrera, J.G. (2006) Calculation of the coefficients of oxygen permeability of mortar samples using PORECOR analysis. Structural Concrete, 7 (4). pp. 159-164. ISSN 14644177

Shafiq, N. and Nuruddin, F. (2005) Fly Ash blended cement: An effective material for addressing durability related issues. In: UNSPECIFIED.

Shafiq, N. (2004) Effects of fly ash on chloride migration in concrete and calculation of cover depth required against the corrosion of embedded steel reinforcement. Structural Concrete, 5 (1). pp. 5-9. ISSN 14644177

Shafiq, N. and Cabrera, J.G. (2004) Effects of initial curing condition on the fluid transport properties in OPC and fly ash blended cement concrete. Cement and Concrete Composites, 26 (4). pp. 381-387. ISSN 09589465