Nikbakht, E. and Gad, M. and Chang, J.W. (2024) Push-out tests on steel composite sections with engineered cementitious composite. Engineering Solid Mechanics, 12 (1). pp. 11-16.

Ong, Z.L. and Chang, J.W. and Nikbakht, E. (2024) Ultimate strength of hybrid repaired offshore pipelines with various slenderness ratio subjected to through-thickness pitting corrosion under axial compressive loading. Structures, 60.

Baharom, M.H. and Nikbakht, E. and Chatziioannou, K. (2023) Combined hardening parameters of high strength steel under low cycle fatigue. Engineering Solid Mechanics, 11 (1). pp. 35-40.

Gad, M.A. and Nikbakht, E. and Faez, M. and Rusydan, A. and Abu Bakar, N.B. (2023) Structural performance of sandwich steel-concrete-steel composites utilising engineered cementitious composites. Structures, 55. pp. 545-556.

Hashlamon, I. and Nikbakht, E. (2023) Theoretical and numerical investigation of bridge frequency identification employing an instrumented vehicle in stationary and moving states. Structures, 51. pp. 1684-1693. ISSN 23520124

Alraeeini, A.S. and Nikbakht, E. and Gunawan, L. (2022) Behavior of Double and Single Square Steel Tube Alloy Composite Subjected to Bending. In: UNSPECIFIED.

Alraeeini, A.S. and Nikbakht, E. (2022) Corrosion effect on the flexural behaviour of concrete filled steel tubulars with single and double skins using engineered cementitious composite. Structures, 44. pp. 1680-1694. ISSN 23520124

Teo, W. and Shirai, K. and Lim, J.H. and Jack, L.B. and Nikbakht, E. (2022) Experimental Investigation on Ambient-Cured One-Part Alkali-Activated Binders Using Combined High-Calcium Fly Ash (HCFA) and Ground Granulated Blast Furnace Slag (GGBS). Materials, 15 (4). ISSN 19961944

Hashlamon, I. and Nikbakht, E. (2022) The Use of a Movable Vehicle in a Stationary Condition for Indirect Bridge Damage Detection Using Baseline-Free Methodology. Applied Sciences (Switzerland), 12 (22). ISSN 20763417

Aswin, M. and Nikbakht, E. and Bt Nazir, N.S. and Bt Tajuddin, N.S. and Bt Ahmad, N.A. (2021) Experimental study on structural behaviour of corbels with hybrid fibre reinforced concrete (Hyfrc). Lecture Notes in Civil Engineering, 132. pp. 413-420. ISSN 23662557

Hashlamon, I. and Nikbakht, E. and Topa, A. (2021) Indirect bridge health monitoring employing contact-point response of instrumented stationary vehicle. Lecture Notes in Civil Engineering, 132. pp. 883-890. ISSN 23662557

Hashlamon, I. and Nikbakht, E. and Topa, A. and Elhattab, A. (2021) Numerical parametric study on the effectiveness of the contact-point response of a stationary vehicle for bridge health monitoring. Applied Sciences (Switzerland), 11 (15). ISSN 20763417

Alraeeini, A.S. and Nikbakht, E. and Ismail, M.C. (2021) Square Steel Tube Impressed Current Corrosion Rate in Term of Linear Polarization Resistance (LPR) Method. Lecture Notes in Civil Engineering, 139 LN. pp. 123-130. ISSN 23662557

Nikbakht, E. and Wong Weng Lok, J. and Teo, W. (2021) Structural behaviour of novel composite beams consisting of geopolymer concrete and high-performance concrete. Structures, 32. pp. 106-115. ISSN 23520124

Gad, M.A. and Nikbakht, E. and Khaled, A. and Al-Raeeini, A. (2021) Ultimate Strength of Glass Fibre Reinforced Polymer�Engineered Cementitious Composites (GFRP-ECC) Sandwich Composite Sections. Lecture Notes in Civil Engineering, 139 LN. pp. 51-61. ISSN 23662557

Aliha, M.R.M. and Ebneabbasi, P. and Karimi, H.R. and Nikbakht, E. (2021) A novel test device for the direct measurement of tensile strength of rock using ring shape sample. International Journal of Rock Mechanics and Mining Sciences, 139. ISSN 13651609

Abdi, A. and Zarei, M. and Mehdinazar, M. and Akbarinia, F. and Nikbakht, E. (2020) Economic analysis based on the unit weight of hot mix asphalt. Engineering Solid Mechanics, 9 (1). pp. 93-100. ISSN 22918744

Al-Nini, A. and Nikbakht, E. and Syamsir, A. and Shafiq, N. and Mohammed, B.S. and Al-Fakih, A. and Al-Nini, W. and Amran, Y.H.M. (2020) Flexural behavior of double-skin steel tube beams filled with fiber-reinforced cementitious composite and strengthened with CFRP sheets. Materials, 13 (14). ISSN 19961944

Gad, M.A. and Riad, A.M. and Nikbakht, E. and Ali, M. and Ghanem, G.M. (2020) Structural Behavior of Slender Reinforced Concrete Columns Wrapped with Fiber Reinforced Polymers Subjected to Eccentric Loads. In: UNSPECIFIED.

Nikbakht, E. and Shuhadah, N.I. and Ganapathy, Ramanathan A/L and Subramaniam, Shukanthi A/P and Bakar, N.A. (2020) Structural Behaviour of Strengthened High-Performance Concrete-Filled Double Skin Steel Tube Beams. Lecture Notes in Civil Engineering, 59. pp. 87-93. ISSN 23662557

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Nikbakht, E. (2019) Incorporation of waste materials in the manufacture of masonry bricks: An update review. Journal of Building Engineering, 21. pp. 37-54. ISSN 23527102

Zin, N.M. and Al-Fakih, A. and Nikbakht, E. and Teo, W. and Gad, M.A. (2019) Influence of secondary reinforcement on behaviour of corbels with various types of high-performance fiber-reinforced cementitious composites. Materials, 12 (24). ISSN 19961944

Nikbakht, E. and Al-Fakih, A. and Hui, C.C. and Jake, L.Y. and Mahzabin, M.S. (2019) An experimental investigation on the shear and flexural behavior of steel reinforced HPSCC beams. Structures, 19. pp. 286-295. ISSN 23520124

Al-Fakih, A. and Mohammed, B.S. and Nuruddin, F. and Nikbakht, E. (2018) Development of Interlocking Masonry Bricks and its' Structural Behaviour: A Review Paper. In: UNSPECIFIED.

Nikbakht, E. and Rashid, K. (2018) Investigation on seismic performance and functionality of self-centring post-tensioned segmental columns. Structure and Infrastructure Engineering, 14 (6). pp. 730-742. ISSN 15732479

Nikbakht, E. and Gaspar, H.A.D.C. and Jaradah, R.M. and Sutanto, M.H. (2018) Investigation on the Influence of Type of Steel Fibers on Shear Failure of HPFRCC Beams. In: UNSPECIFIED.

Nikbakht, E. and Al-Nini, A. and Dahi, S.M. and Mahzabin, S. (2018) Lateral behaviour of PT segmental bridge columns with Ultra High Strength Concrete (UHSC). In: UNSPECIFIED.

Zahid, M. and Shafiq, N. and Nuruddin, M.F. and Nikbakht, E. and Jalal, A. (2017) Effect of partial replacement of fly ash by metakaolin on strength development of fly ash based geopolymer mortar. Key Engineering Materials, 744 74. pp. 131-135. ISSN 10139826

Jalal, A. and Shafiq, N. and Nikbakht, E. and Kumar, R. and Zahid, M. (2017) Mechanical properties of hybrid basalt-polyvinyl alcohol (PVA) fiber reinforced concrete. Key Engineering Materials, 744 74. pp. 3-7. ISSN 10139826

Hafezolghorani Esfahani, M. and Hejazi, F. and Vaghei, R. and Nikbakht, E. and Tze, D.C.J. (2016) Development of Constitutive Model for Precast Prestressed Concrete Segmental Columns. Modelling and Simulation in Engineering, 2016. ISSN 16875591

Nikbakht, E. and Mahzabin, M.S. (2016) Displacement-based design for precast post-tensioned segmental columns with different aspect ratios. In: UNSPECIFIED.