Rafiq, W. and Napiah, M. and Sutanto, M.H. and Alaloul, W.S. (2024) Crude Palm Oil Effect on Aged Binder Morphological Characteristics. In: UNSPECIFIED.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2024) Feasibility Evaluation of Waste Palm Oil Clinker Powder as a Fillers Substitute for Eco-Friendly Hot Mix Asphalt Pavement. International Journal of Pavement Research and Technology, 17 (2). pp. 446-459.

Malik, A.M.A. and Santhanasamy, R. and Widyatmoko, I. and Sutanto, M.H. (2024) Investigating the Effect of Cornering Maneuver on the Performance of Bituminous Racetrack Pavement. In: UNSPECIFIED.

Yusof, N.I.B.B.M. and Memon, A.M. and Sutanto, M.H. (2024) Investigation on the Properties of Reclaimed Asphalt Pavement Rejuvenated with Rubber Seed Oil. Lecture Notes in Civil Engineering, 324. pp. 411-420.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2024) Mixture Design-Based Performance Optimization via Response Surface Methodology and Moisture Durability Study for Palm Oil Clinker Fine Modified Bitumen Asphalt Mixtures. International Journal of Pavement Research and Technology, 17 (1). pp. 123-150. ISSN 19966814

Bujang, M. and Mohamad, M.E. and Ahmad, A. and Sutanto, M.H. and Zainudin, K. and Mohamad, S.N.A. (2024) Performance of Silica Waste as a Stabilizing Agent in Peat. In: UNSPECIFIED.

Mohammed, B.S. and Min, T.H. and Sutanto, M.H. and Joewono, T.B. and As�ad, S. (2024) Preface. Lecture Notes in Civil Engineering, 324. v. ISSN 23662557

Yousafzai, A.K. and Sutanto, M.H. and Khan, M.I. and Baarimah, A.O. and Mushtaha, A.W. and Khan, N. (2024) A Scientometric Analysis of Electrically Conductive Asphalt Concrete Technology. In: UNSPECIFIED.

Khan, M.I. and Asylam, M.E. and Sutanto, M.H. and Widyatmoko, I. (2024) Simulating the Impact of Extreme Aircraft Loading on the Performance of Bituminous Pavement for Airport Application. In: UNSPECIFIED.

Memon, A.M. and Sutanto, M.H. and Memon, Z.A. and Khahro, S.H. and Memon, R.A. (2024) Valorization of petroleum sludge as rejuvenator for recycled asphalt binder and mixture. Case Studies in Construction Materials, 20.

Santhanasamy, R. and Sutanto, M.H. (2023) A Comparative Study on the Physical and Rheological Properties of 60/70 and 80/100 Penetration Grade Bitumen in Malaysia. Journal of Mechanical Engineering, 20 (1). pp. 217-231.

Yaro, N.S.A. and Sutanto, M.H. and Baloo, L. and Habib, N.Z. and Usman, A. and Yousafzai, A.K. and Ahmad, A. and Birniwa, A.H. and Jagaba, A.H. and Noor, A. (2023) A Comprehensive Overview of the Utilization of Recycled Waste Materials and Technologies in Asphalt Pavements: Towards Environmental and Sustainable Low-Carbon Roads. Processes, 11 (7). ISSN 22279717

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Usman, A. and Kaura, J.M. and Murana, A.A. and Birniwa, A.H. and Jagaba, A.H. (2023) A Comprehensive Review of Biochar Utilization for Low-Carbon Flexible Asphalt Pavements. Sustainability (Switzerland), 15 (8). ISSN 20711050

Usman, A. and Sutanto, M.H. and Yaro, N.S.A. and Albuaymi, M. and Alluqmani, A.E. and Alanazi, H. (2023) Effects of γ radiation on rutting and fatigue performance of WPET asphalt mixtures. Case Studies in Construction Materials, 19.

Khan, M.I. and Sutanto, M.H. and Khahro, S.H. and Zoorob, S.E. and Md. Yusoff, N.I. and Al-Sabaeei, A.M. and Javed, Y. (2023) Fatigue Prediction Model and Stiffness Modulus for Semi-Flexible Pavement Surfacing Using Irradiated Waste Polyethylene Terephthalate-Based Cement Grouts. Coatings, 13 (1). ISSN 20796412

Ahmad, A. and Sutanto, M.H. and Ahmad, N.R. and Khan, M.A. and Wahab, A. and Sapar, N.I.F. and Hashir, M. (2023) Feasibility of Bituminous Stabilizer in the Stabilization of Problematic Soil: An Overview on the Non-Traditional Soil Additive. In: UNSPECIFIED.

Ahmad, A. and Sutanto, M.H. and Ahmad, N.R. and Mohamad, M.E. and Bujang, M. (2023) Microstructural Characterization of Fibric Peat Stabilized with Portland Cement and Silica Fume. Materials, 16 (1).

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Jagaba, A.H. and Al-Sabaeei, A.M. (2023) Modeling and optimization of asphalt content, waste palm oil clinker powder and waste rice straw ash for sustainable asphalt paving employing response surface methodology: A pilot study. Cleaner Materials, 8.

Aliyu Yaro, N.S. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Muhammad, A. and Jagaba, A.H. (2023) Modeling and optimization of rheological properties and aging resistance of asphalt binder incorporating palm oil mill waste using response surface methodology. Journal of Infrastructure Intelligence and Resilience, 2 (1).

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Usman, A. and Tanjung, L.E. and Aliyu, I. and Jagaba, A.H. (2023) Optimizing biochar-based geopolymer composites for enhanced water resistance in asphalt mixes: an experimental, microstructural, and multi-objective analysis. Journal of Engineering and Applied Science, 70 (1).

Memon, A.M. and Sutanto, M.H. and Yusoff, N.I.M. and Memon, R.A. and Khan, M.I. and Al-Sabaeei, A.M. (2023) Rheological modeling and microstructural evaluation of oily sludge modified bitumen. Case Studies in Construction Materials, 18.

Rahmad, S. and Khahro, S.H. and Rosyidi, S.A.P. and Widyatmoko, I. and Memon, N.A. and Al-Sabaeei, A.M. and Milad, A. and Sutanto, M.H. and Yusoff, N.I.M. (2022) Assessment of metal leaching from rediset-polymer modified asphalt binder on groundwater and soil contamination. Case Studies in Construction Materials, 16. ISSN 22145095

Khan, M.I. and Sutanto, M.H. and Yusoff, N.I.M. and Zoorob, S.E. and Rafiq, W. and Ali, M. and Fediuk, R. and Vatin, N.I. (2022) Cementitious Grouts for Semi-Flexible Pavement Surfaces�A Review. Materials, 15 (15). ISSN 19961944

Datti, Y.U. and Abdullah Zawawi, N.A.W. and Umar, A.A. and Sutanto, M.H. and Danyaro, K.U. (2022) Challenges of Maturity Models in Public-Private Partnerships (PPPs) in the Post-COVID-19 Era. Journal of Engineering, Project, and Production Management, 12 (2). pp. 149-165. ISSN 22216529

Babashamsi, P. and Khahro, S.H. and Omar, H.A. and Rosyidi, S.A.P. and Al-Sabaeei, A.M. and Milad, A. and Bilema, M. and Sutanto, M.H. and Yusoff, N.I.M. (2022) A Comparative Study of Probabilistic and Deterministic Methods for the Direct and Indirect Costs in Life-Cycle Cost Analysis for Airport Pavements. Sustainability (Switzerland), 14 (7). ISSN 20711050

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Muhammad, A. (2022) Comparison of Response Surface Methodology and Artificial Neural Network approach in predicting the performance and properties of palm oil clinker fine modified asphalt mixtures. Construction and Building Materials, 324. ISSN 09500618

Khan, M.I. and Sutanto, M.H. and Khan, K. and Iqbal, M. and Napiah, M.B. and Zoorob, S.E. and Klemeš, J.J. and Bokhari, A. and Rafiq, W. (2022) Effective use of recycled waste PET in cementitious grouts for developing sustainable semi-flexible pavement surfacing using artificial neural network (ANN). Journal of Cleaner Production, 340. ISSN 09596526

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Mizwar, I.K. and Umar, A.M. (2022) Engineering Properties of Palm Oil Clinker Fine-Modified Asphaltic Concrete Mixtures. Journal of Engineering and Technological Sciences, 54 (2). ISSN 23375779

Usman, A. and Sutanto, M.H. and Napiah, M. and Zoorob, S.E. and Yaro, N.S.A. (2022) Evaluation of optimum asphalt content and engineering properties of asphalt mixture containing irradiated waste plastic bottles granules as aggregates. In: UNSPECIFIED.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Yusoff, N.I.M. and Khairuddin, F.H. and Memon, A.M. (2022) Evaluation of the high-temperature rheological performance of tire pyrolysis oil-modified bio-asphalt. International Journal of Pavement Engineering, 23 (11). pp. 4007-4022. ISSN 10298436

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2022) Feasibility Evaluation of Waste Palm Oil Clinker Powder as a Fillers Substitute for Eco-Friendly Hot Mix Asphalt Pavement. International Journal of Pavement Research and Technology. ISSN 19966814

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Jagaba, A.H. and Mani, A.U. and Ahmad, A. (2022) Geopolymer utilization in the pavement industry - An overview. In: UNSPECIFIED.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Zoorob, S.E. and Usman, A. (2022) Influence of nanosilica particles on the high-temperature performance of waste denim fibre-modified bitumen. International Journal of Pavement Engineering, 23 (2). pp. 207-220. ISSN 10298436

Khan, M.I. and Sutanto, M.H. and Napiah, M.B. and Zoorob, S.E. and Yusoff, N.I.M. and Usman, A. and Memon, A.M. (2022) Irradiated polyethylene terephthalate and fly ash based grouts for semi-flexible pavement: design and optimisation using response surface methodology. International Journal of Pavement Engineering, 23 (8). pp. 2515-2530. ISSN 10298436

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2022) Mixture Design-Based Performance Optimization via Response Surface Methodology and Moisture Durability Study for Palm Oil Clinker Fine Modified Bitumen Asphalt Mixtures. International Journal of Pavement Research and Technology. ISSN 19966814

Mohamad, M.E. and Ahmad, A. and Sadon, H.B. and Sutanto, M.H. and Bujang, M. and Kifli, A.B.Z. and Mohamad, S.N.A. (2022) Peat Stabilization Using Waste Crumb Rubber Tire. Civil Engineering and Architecture, 10 (7). pp. 3253-3263. ISSN 23321091

Babashamsi, P. and Khahro, S.H. and Omar, H.A. and Al-Sabaeei, A.M. and Memon, A.M. and Milad, A. and Khan, M.I. and Sutanto, M.H. and Yusoff, N.I.M. (2022) Perspective of Life-Cycle Cost Analysis and Risk Assessment for Airport Pavement in Delaying Preventive Maintenance. Sustainability (Switzerland), 14 (5). ISSN 20711050

Usman, A. and Sutanto, M.H. and Napiah, M. and Al-Sabaeei, A.M. and Yaro, N.S.A. and Kumalasari, I. and Saeed, S.M. (2022) Waste Polyethylene Terephthalate granules modified by gamma irradiation and their effect as fine aggregates on moisture damage of asphalt mixtures. In: UNSPECIFIED.

Solikin, M. and Falah, M.F. and Sunarjono, S. and Hidayati, N. and Trinugroho, S. and Sutanto, M.H. and Asnan, M.N. (2021) Bending Performance of Half-Slab Styrofoam Mortar with Glazed Nylon Fiber. Civil and Environmental Engineering, 17 (1). pp. 50-57. ISSN 13365835

Usman, A. and Sutanto, M.H. and Napiah, M. and Zoorob, S.E. and Yaro, N.S.A. and Khan, M.I. (2021) Comparison of performance properties and prediction of regular and gamma-irradiated granular waste polyethylene terephthalate modified asphalt mixtures. Polymers, 13 (16). ISSN 20734360

Khan, M.I. and Sutanto, M.H. and Napiah, M.B. and Khan, K. and Rafiq, W. (2021) Design optimization and statistical modeling of cementitious grout containing irradiated plastic waste and silica fume using response surface methodology. Construction and Building Materials, 271. ISSN 09500618

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Rahmad, S. and Yusoff, N.I.M. and Alaloul, W.S. (2021) Determination of rheological properties of bio-asphalt binders through experimental and multilayer feed-forward neural network methods. Ain Shams Engineering Journal, 12 (4). pp. 3485-3493. ISSN 20904479

Omar, H.A. and Mubaraki, M. and Abdullah, N.H. and Al-Sabaeei, A. and Memon, A.M. and Imran Khan, M. and Sutanto, M.H. and Md Yusoff, N.I. (2021) Determining the effect of ageing of nano-clay modified bitumen using atomic force microscopy. Scientia Iranica, 28 (5 A). pp. 2534-2545. ISSN 10263098

Yaro, N.S.A. and Napiah, M.B. and Sutanto, M.H. and Usman, A. and Murana, A.A. and Rafiq, W. (2021) Effect of Palm Oil Clinker Powder-Based Geopolymer on Bitumen and Asphalt Mixture Properties. In: UNSPECIFIED.

Khan, M.I. and Wen, L.S. and Sutanto, M.H. and Napiah, M.B. and Zoorob, S.E. (2021) Effect of cement grouts containing irradiated polyethylene terephthalate on properties of semi-flexible mixtures. Key Engineering Materials, 888 KE. pp. 3-8. ISSN 10139826

Mizwar, I.K. and Napiah, M. and Sutanto, M.H. (2021) Effect of phase change material on rheological properties of asphalt mastic. Lecture Notes in Civil Engineering, 132. pp. 836-843. ISSN 23662557

Memon, A.M. and Sutanto, M.H. and Napiah, M. and Wong, F. and Bujang, M. (2021) Effects of bitumen modification on pavement performance subjected to high vehicular speed and extreme temperature conditions: A review. Lecture Notes in Civil Engineering, 132. pp. 1044-1051. ISSN 23662557

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Rafindadi, A.D. and Saeed, S.M. and Abdulrahman, S. (2021) Evaluation of the Impact of Short-Term Aging on Volumetric and Marshall Properties of Palm Oil Clinker Fine Modified Asphalt Concrete (POCF-MAC). In: UNSPECIFIED.

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Saeed, S.M. and Kaura, J.M. (2021) Influence of modification mixing parameters on conventional properties of palm oil clinker fine (POCF)-modified bitumen. In: UNSPECIFIED.

Heng, K.K. and Khan, M.I. and Sutanto, M.H. and Zoorob, S.E. and Sunarjono, S. (2021) Investigating Mechanical Properties of Interlocking Concrete Blocks by Recycling Waste Polyethylene Terephthalate-A Sustainable Approach. In: UNSPECIFIED.

Imran Khan, M. and Sutanto, M.H. and Napiah, M.B. and Zoorob, S.E. and Al-Sabaeei, A.M. and Rafiq, W. and Ali, M. and Memon, A.M. (2021) Investigating the mechanical properties and fuel spillage resistance of semi-flexible pavement surfacing containing irradiated waste PET based grouts. Construction and Building Materials, 304. ISSN 09500618

Usman, A. and Sutanto, M.H. and Napiah, M. and Zoorob, S.E. and Abdulrahman, S. and Saeed, S.M. (2021) Irradiated polyethylene terephthalate fiber and binder contents optimization for fiber-reinforced asphalt mix using response surface methodology. Ain Shams Engineering Journal, 12 (1). pp. 271-282. ISSN 20904479

Rafiq, W. and Musarat, M.A. and Altaf, M. and Napiah, M. and Sutanto, M.H. and Alaloul, W.S. and Javed, M.F. and Mosavi, A. (2021) Life cycle cost analysis comparison of hot mix asphalt and reclaimed asphalt pavement: A case study. Sustainability (Switzerland), 13 (8). ISSN 20711050

Rafiq, W. and Napiah, M. and Habib, N.Z. and Sutanto, M.H. and Alaloul, W.S. and Khan, M.I. and Musarat, M.A. and Memon, A.M. (2021) Modeling and design optimization of reclaimed asphalt pavement containing crude palm oil using response surface methodology. Construction and Building Materials, 291. ISSN 09500618

Yaro, N.S.A. and Napiah, M.B. and Sutanto, M.H. and Usman, A. and Saeed, S.M. (2021) Modeling and optimization of mixing parameters using response surface methodology and characterization of palm oil clinker fine modified bitumen. Construction and Building Materials, 298. ISSN 09500618

Saeed, S.M. and Sutanto, M.H. and Napiah, M. and Usman, A. and Batari, A. and Aman, M.Y. and Aliyu Yaro, N.S. (2021) Optimization of rubber seed oil content as bio-oil rejuvenator and total water content for cold recycled asphalt mixtures using response surface methodology. Case Studies in Construction Materials, 15. ISSN 22145095

Yaro, N.S.A. and Bin Napiah, M. and Sutanto, M.H. and Usman, A. and Saeed, S.M. (2021) Performance evaluation of waste palm oil fiber reinforced stone matrix asphalt mixtures using traditional and sequential mixing processes. Case Studies in Construction Materials, 15. ISSN 22145095

Memon, A.M. and Sutanto, M.H. and Napiah, M. and Yusoff, N.I.M. and Memon, R.A. and Al-Sabaeei, A.M. and Ali, M. (2021) Physicochemical, rheological and morphological properties of bitumen incorporating petroleum sludge. Construction and Building Materials, 297. ISSN 09500618

Ahmad, A. and Sutanto, M.H. and Al-Bared, M.A.M. and Harahap, I.S.H. and Abad, S.V.A.N.K. and Khan, M.A. (2021) Physio-Chemical Properties, Consolidation, and Stabilization of Tropical Peat Soil Using Traditional Soil Additives � A State of the Art Literature Review. KSCE Journal of Civil Engineering, 25 (10). pp. 3662-3678. ISSN 12267988

Saeed, S.M. and Sutanto, M.H. and Napiah, M. and Wong, F. and Bujang, M. (2021) Review on the effect of curing on cold recycled asphalt mixture. Lecture Notes in Civil Engineering, 132. pp. 1052-1060. ISSN 23662557

Mizwar, I.K. and Napiah, M. and Sutanto, M.H. and Habib, N.Z. and Thanapal, P. and Qin, Y. (2021) Rutting Prevention of Bituminous Mastic Using Microencapsulation Phase Change Material. Journal of Materials in Civil Engineering, 33 (12). ISSN 08991561

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Hainin, M.R. and Usman, A. and Rafindadi, A.D. and Abdulrahman, S. and Saeed, S.M. (2021) Utilization of Palm Oil Mill Residue as Sustainable Pavement Materials: A Review. International Journal of Integrated Engineering, 13 (3). pp. 66-78. ISSN 2229838X

Ahmad, A. and Sutanto, M.H. and Ahmad, N.R.B. and Bujang, M. and Mohamad, M.E. (2021) The implementation of industrial byproduct in malaysian peat improvement: A sustainable soil stabilization approach. Materials, 14 (23). ISSN 19961944

Al-Sabaeei, A.M. and Mustofa, B.A. and Sutanto, M.H. and Sunarjono, S. and Bala, N. (2020) Aging and rheological properties of latex and crumb rubber modified bitumen using dynamic shear rheometer. Journal of Engineering and Technological Sciences, 52 (3). pp. 385-398. ISSN 23375779

Usman, A. and Sutanto, M.H. and Napiah, M. and Zoorob, S.E. and Khan, M.I. and Ibrahim, M.B. (2020) Application of gamma irradiation on Polyethylene Terephthalate (PET) for use in asphaltic concrete mixtures as aggregates replacement. In: UNSPECIFIED.

Siswanto, H. and Supriyanto, B. and Pranoto and Sutanto, M.H. (2020) Constructing a strategy to improve indonesian regency road performance using balanced scorecard. International Journal of GEOMATE, 18 (69). pp. 248-253. ISSN 21862982

Ahmad, A. and Sutanto, M.H. and Harahap, I.S.H. and Al-Bared, M.A.M. and Khan, M.A. (2020) Feasibility of Demolished Concrete and Scraped Tires in Peat Stabilization - A Review on the Sustainable approach in Stabilization. In: UNSPECIFIED.

Rafiq, W. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Zabri, Z.N.B. and Khan, M.I. and Musarat, M.A. (2020) Investigation on hamburg wheel-tracking device stripping performance properties of recycled hot-mix asphalt mixtures. Materials, 13 (21). pp. 1-15. ISSN 19961944

Imran Khan, M. and Sutanto, M.H. and Napiah, M.B. and Zahid, M. and Usman, A. (2020) Optimization of Cementitious Grouts for Semi-Flexible Pavement Surfaces Using Response Surface Methodology. In: UNSPECIFIED.

Mizwar, I.K. and Napiah, M.B. and Sutanto, M.H. (2020) Pavements for mitigating urban heat island effects. Elsevier, pp. 61-76. ISBN 9780128207918

Rafiq, W. and Humair, M. and Napiah, M.B. and Sutanto, M.H. and Musarat, M.A. and Memon, A.M. (2020) Performance Evaluation of Rutting and Moisture Damage containing Warm Mix Asphalt Mixtures with Recycled Asphalt pavement. In: UNSPECIFIED.

Harnaeni, S.R. and Pramesti, F.P. and Budiarto, A. and Setyawan, A. and Khan, M.I. and Sutanto, M.H. (2020) Study on structural performance of asphalt concrete and hot rolled sheet through viscoelastic characterization. Materials, 13 (5). ISSN 19961944

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Usman, A. (2020) A systematic review of bio-asphalt for flexible pavement applications: Coherent taxonomy, motivations, challenges and future directions. Journal of Cleaner Production, 249. ISSN 09596526

Khan, M.I. and Sutanto, M.H. and Sunarjono, S. and Room, S. and Yusoff, N.I.M. (2019) Effect of crumb rubber, epolene (EE-2), and date palm ash as modifiers on the performance of binders and mixtures: A sustainable approach. Sustainability (Switzerland), 11 (22). ISSN 20711050

Khan, M.I. and Huat, H.Y. and bin Muhamad Dun, M.H. and Sutanto, M.H. and Jarghouyeh, E.N. and Zoorob, S.E. (2019) Effect of irradiated and non-irradiated waste PET based cementitious grouts on flexural strength of semi-flexible pavement. Materials, 12 (24). ISSN 19961944

Zahidy, A.A. and Sutanto, M.H. and Napiah, M. and Hamid, Z.A. (2019) Measuring the relationships of road service quality and road traffic accidents. International Journal of Innovative Technology and Exploring Engineering, 9 (1). pp. 719-725. ISSN 22783075

Bala, N. and Kamaruddin, I. and Napiah, M. and Sutanto, M.H. (2019) Polymer Nanocomposite-Modified Asphalt: Characterisation and Optimisation Using Response Surface Methodology. Arabian Journal for Science and Engineering, 44 (5). pp. 4233-4243. ISSN 2193567X

Ghafar, N.H.A. and Sutanto, M.H. and Saeed, S.M. and Sunarjono, S. (2019) Safe braking distance at signalized intersection. International Journal of Innovative Technology and Exploring Engineering, 9 (1). pp. 2774-2781. ISSN 22783075

Usman, A. and Izzaty, N. and Ibrahim, R. and Sutanto, M.H. and Sunarjono, S. (2019) Storage stability and morphology of latex modified bitumen. International Journal of Innovative Technology and Exploring Engineering, 9 (1). pp. 4435-4440. ISSN 22783075

Mizwar, I.K. and Napiah, M. and Sutanto, M.H. (2019) Thermal properties of cool asphalt concrete containing phase change material. In: UNSPECIFIED.

Usman, A. and Sutanto, M.H. and Napiah, M. (2018) Effect of Recycled Plastic in Mortar and Concrete and the Application of Gamma Irradiation-A Review. In: UNSPECIFIED.

Zulkifili, N.H. and Sutanto, M.H. (2018) The Influence of Bonding between Layers on Pavement Performance, a Case Study of Malaysian Road. In: UNSPECIFIED.

Nikbakht, E. and Gaspar, H.A.D.C. and Jaradah, R.M. and Sutanto, M.H. (2018) Investigation on the Influence of Type of Steel Fibers on Shear Failure of HPFRCC Beams. In: UNSPECIFIED.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Ghaleb, A.A.S. (2018) An overview on using the chicken manure (CM) waste as a bio-binder for sustainable flexible pavement. International Journal of Engineering Research and Technology, 11 (12). pp. 2023-2033. ISSN 09743154

Kumalasari, I. and Napiah, M. and Sutanto, M.H. (2018) A review on phase change materials incorporation in asphalt pavement. Indonesian Journal of Science and Technology, 3 (2). pp. 171-179. ISSN 25281410