Nazar, M. and Ahmad, A. and Hussain, S.M.S. and Moniruzzaman, M. (2024) Binary mixture of ionic liquid and span 80 for oil spill remediation: Synthesis and performance evaluation. Marine Pollution Bulletin, 202.

Bujang, M. and Mohamad, M.E. and Ahmad, A. and Sutanto, M.H. and Zainudin, K. and Mohamad, S.N.A. (2024) Performance of Silica Waste as a Stabilizing Agent in Peat. In: UNSPECIFIED.

Munir, H.M.B. and Yasin, S. and Iqbal, T. and Qamar, S. and Ahmad, A. and Mahmood, H. and Moniruzzaman, M. (2024) Thermomechanical evaluation of zinc oxide/hydroxyapatite/high-density polyethylene hybrid composites. Journal of Applied Polymer Science. ISSN 00218995

Nazar, M. and Ul Hassan Shah, M. and Ahmad, A. and Goto, M. and Zaireen Nisa Yahya, W. and Moniruzzaman, M. (2023) Aggregation, toxicity, and biodegradability study of an ionic liquid-based formulation for effective oil spill remediation. Chemosphere, 344.

Su�ait, M.S. and Rayung, M. and Ibrahim, S. and Ahmad, A. (2023) Bio-Based Polyurethane Polymer Electrolyte for Dye Solar Cells Application. ACS Symposium Series, 1454. pp. 37-62. ISSN 00976156

Wang, P.S. and Ahmad, A. and Nazar, M. and Rahmah, A.U. and Moniruzzaman, M. (2023) Biocompatible and Biodegradable Surfactants from Orange Peel for Oil Spill Remediation. Molecules, 28 (15).

Ahmad, A. and Sari, M.Y.A. and Sakidin, H. and Sufahani, S.F. and Amin, A.R.M. and Rasib, A.W. (2023) CLASSIFICATION OF OBJECTS WITHIN AGRICULTURAL LANDSCAPE FROM HIGH-RESOLUTION AERIAL IMAGERY USING MAXIMUM LIKELIHOOD DISCRIMINANT RULES. ARPN Journal of Engineering and Applied Sciences, 18 (8). pp. 936-948.

Ahmed, I. and Ahmad, A. and Abdul-Rani, A.M. and Tasnim, N. and Al-Amin, M. (2023) A Comparative Review of Surface Modification Technique Between Physical Vapor Deposition (PVD) and Plasma Electrolytic Oxidation (PEO) for Biomedical Applications. Lecture Notes in Mechanical Engineering. pp. 813-829. ISSN 21954356

Sithambaranathan, P. and Nasef, M.M. and Ahmad, A. and Abbasi, A. and Ting, T.M. (2023) Composite Proton-Conducting Membrane with Enhanced Phosphoric Acid Doping of Basic Films Radiochemically Grafted with Binary Vinyl Heterocyclic Monomer Mixtures. Membranes, 13 (1).

Yaro, N.S.A. and Sutanto, M.H. and Baloo, L. and Habib, N.Z. and Usman, A. and Yousafzai, A.K. and Ahmad, A. and Birniwa, A.H. and Jagaba, A.H. and Noor, A. (2023) A Comprehensive Overview of the Utilization of Recycled Waste Materials and Technologies in Asphalt Pavements: Towards Environmental and Sustainable Low-Carbon Roads. Processes, 11 (7). ISSN 22279717

Ahmad, A. and Mansor, N. and Mahmood, H. and Sharif, F. and Safdar, R. and Moniruzzaman, M. (2023) Evaluation thermal degradation kinetics of ionic liquid assisted polyetheretherketone-multiwalled carbon nanotubes composites. Journal of Applied Polymer Science, 140 (12).

Ahmad, A. and Sutanto, M.H. and Ahmad, N.R. and Khan, M.A. and Wahab, A. and Sapar, N.I.F. and Hashir, M. (2023) Feasibility of Bituminous Stabilizer in the Stabilization of Problematic Soil: An Overview on the Non-Traditional Soil Additive. In: UNSPECIFIED.

Zakaria, M.S. and Mustapha, M. and Azmi, A.I. and Al Hafiz Mohd Nawi, M. and Ahmad, A. (2023) Finite Element Modelling of Serrated Chip Formation During Turning AZ31 Magnesium Alloy. In: UNSPECIFIED.

Majid, M.F. and Mohd Zaid, H.F. and Abd Shukur, M.F. and Ahmad, A. and Jumbri, K. (2023) Host�Guest Interactions of Zirconium-Based Metal�Organic Framework with Ionic Liquid. Molecules, 28 (6).

Halim, F. and Ahmad, A. and Adil, M. and Khan, A. and Ghareeb, M. and Alzara, M. and Eldin, S.M. and Alsharari, F. and Yosri, A.M. (2023) Investigating the Retrofitting Effect of Fiber-Reinforced Plastic and Steel Mesh Casting on Unreinforced Masonry Walls. Materials, 16 (1). ISSN 19961944

Sabireen and Butt, F. and Ahmad, A. and Ullah, K. and Zaid, O. and Ahmed Shah, H. and Kamal, T. (2023) Mechanical performance of fiber-reinforced concrete and functionally graded concrete with natural and recycled aggregates. Ain Shams Engineering Journal, 14 (9).

Baharudin, B.A. and Mustapha, M. and Ismail, A. and Zulkipli, F.N. and Ayob, F. and Ahmad, A. (2023) Microhardness and Process Parameter Optimization of Friction Stir Welding on an AA5052 Thin Plate. Advanced Structured Materials, 165. pp. 133-141.

Ahmad, A. and Sutanto, M.H. and Ahmad, N.R. and Mohamad, M.E. and Bujang, M. (2023) Microstructural Characterization of Fibric Peat Stabilized with Portland Cement and Silica Fume. Materials, 16 (1).

Ahmad, A. and Pango, B. and Ismail, M. and Bustam, M.A. (2023) Performance Evaluation of the Developed MOF-177 for CO2 Capture. Journal of Advanced Research in Applied Mechanics, 111 (1). pp. 74-81.

Ahmad, A. and Abbas, A. and Hussain, G. and Al-Abbasi, O. and Alkahtani, M. and Altaf, K. (2023) Performance evaluation of 3D printed polymer heat exchangers: influence of printing temperature, printing speed and wall thickness with consideration of surface roughness. International Journal of Advanced Manufacturing Technology, 128 (7-8). pp. 3627-3647.

Majid, M.F. and Mohd Zaid, H.F. and Abd Shukur, M.F. and Ahmad, A. and Jumbri, K. (2023) Physicochemical properties and density functional theory calculation of octahedral UiO-66 with Bis(Trifluoromethanesulfonyl)imide ionic liquids. Heliyon, 9 (10).

Baharudin, B.A. and Mustapha, M. and Ismail, A. and Zulkipli, F.N. and Ayob, F. and Ahmad, A. (2023) Residual Stress Optimization of Friction Stir Welding on an AA5052 Thin Plate. Advanced Structured Materials, 165. pp. 143-151.

Kari, N.E.F. and Ismail, M. and Ahmad, A. and Kamal, K. and Chew, T.L. and Bustam, M.A. (2023) Screening and Experimental Validation for Selection of Open Metal Sites Metal-Organic Framework (M-CPO-27, M = Co, Mg, Ni and Zn) to Capture CO2. Separations, 10 (8).

Nazar, M. and Yasar, A. and Raza, S.A. and Ahmad, A. and Rasheed, R. and Shahbaz, M. and Tabinda, A.B. (2023) Techno-economic and environmental assessment of rice husk in comparison to coal and furnace oil as a boiler fuel. Biomass Conversion and Biorefinery, 13 (3). pp. 1671-1679.

Chohan, I.M. and Ahmad, A. and Sallih, N. and Bheel, N. and Ali, M. and Deifalla, A.F. (2023) A review on life cycle assessment of different pipeline materials. Results in Engineering, 19.

Birniwa, A.H. and Mahmud, H.N.M.E. and Abdullahi, S.S. and Habibu, S. and Jagaba, A.H. and Ibrahim, M.N.M. and Ahmad, A. and Alshammari, M.B. and Parveen, T. and Umar, K. (2022) Adsorption Behavior of Methylene Blue Cationic Dye in Aqueous Solution Using Polypyrrole-Polyethylenimine Nano-Adsorbent. Polymers, 14 (16). ISSN 20734360

Abd Manan, T.S.B. and Khan, T. and Wan Mohtar, W.H.M. and Mohd Hanafiah, Z. and Latip, A.S.A. and Mustafa, S.F.Z. and Leong, S.Y. and Shamsuddin, A.S. and Isa, M.H. and Hassan, A.K.R. and Ahmad, A. and Wan Rasdi, N. and Mohamad, H. (2022) Algae in medicine and human health. Elsevier, pp. 323-334. ISBN 9780323904766

Ahmad, A. and Banat, F. and Taher, H. (2022) Algal Biotechnology: Integrated Algal Engineering for Bioenergy, Bioremediation, and Biomedical Applications. Elsevier, pp. 1-453. ISBN 9780323904766

Abd Manan, T.S.B. and Khan, T. and Wan Mohtar, W.H.M. and Machmudah, A. and Dutykh, D. and Qazi, S. and Ahmad, A. and Wan Rasdi, N. (2022) Bioremediation of wastewater using algae for potential renewable bioenergy cogeneration. Elsevier, pp. 47-62. ISBN 9780323904766

Reddy, A.V.B. and Rafiq, R. and Ahmad, A. and Maulud, A.S. and Moniruzzaman, M. (2022) Cross-Linked Ionic Liquid Polymer for the Effective Removal of Ionic Dyes from Aqueous Systems: Investigation of Kinetics and Adsorption Isotherms. Molecules, 27 (22). ISSN 14203049

Khan, M.A. and Mustafa, Z. and Harahap, I.S.H. and Balogun, A.-L.B. and Ibrahim, M.B. and Ahmad, A. (2022) EFFECT OF SOLID VOLUME FRACTION AND PARTICLE SIZE ON RHEOLOGY OF DEBRIS FLOW USING DIGITAL HYBRID RHEOMETER. Journal of Engineering Science and Technology, 17 (6). pp. 4032-4046. ISSN 18234690

Othman, N.H. and Mustapha, M. and Sallih, N. and Ahmad, A. and Mustapha, F. and Ismail, M.C. (2022) The Effect of Residual Solvent in Carbon�Based Filler Reinforced Polymer Coating on the Curing Properties, Mechanical and Corrosive Behaviour. Materials, 15 (10). ISSN 19961944

Ahmad, A. and Mansor, N. and Mahmood, H. and Iqbal, T. and Moniruzzaman, M. (2022) Effect of ionic liquids on thermomechanical properties of polyetheretherketone-multiwalled carbon nanotubes nanocomposites. Journal of Applied Polymer Science, 139 (11). ISSN 00218995

Zakaria, M.S. and Mustapha, M. and Azmi, A.I. and Ahmad, A. and Ismail, S.O. and Shuaib, N.A. (2022) Effects of submerged convective cooling in the turning of AZ31 magnesium alloy for tool temperature and wear improvement. International Journal of Advanced Manufacturing Technology, 120 (5-6). pp. 3181-3200. ISSN 02683768

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Jagaba, A.H. and Mani, A.U. and Ahmad, A. (2022) Geopolymer utilization in the pavement industry - An overview. In: UNSPECIFIED.

Oyekanmi, A.A. and Alshammari, M.B. and Mohamad Ibrahim, M.N. and Hanafiah, M.M. and Elnaggar, A.Y. and Ahmad, A. and Oyediran, A.T. and Rosli, M.A. and Setapar, S.H.M. and Daud, N.N.N. and Hussein, E.E. (2022) Highly Effective Cow Bone Based Biocomposite for the Sequestration of Organic Pollutant Parameter from Palm Oil Mill Effluent in a Fixed Bed Column Adsorption System. Polymers, 14 (1). ISSN 20734360

Khan, M. and Ali, U. and Khan, N. and Hussain, S. and Ahmad, A. (2022) Hydraulic Model for Flood Forecasting of Tajabad Khwar in Hayatabad Phase III Peshawar, Pakistan: A Case Study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 89 (1). pp. 160-174. ISSN 22897879

Nazar, M. and Shah, M.U.H. and Ahmad, A. and Yahya, W.Z.N. and Goto, M. and Moniruzzaman, M. (2022) Ionic Liquid and Tween-80 Mixture as an Effective Dispersant for Oil Spills: Toxicity, Biodegradability, and Optimization. ACS Omega. ISSN 24701343

Majid, M.F. and Zaid, H.F.M. and Kait, C.F. and Ahmad, A. and Jumbri, K. (2022) Ionic Liquid@Metal-Organic Framework as a Solid Electrolyte in a Lithium-Ion Battery: Current Performance and Perspective at Molecular Level. Nanomaterials, 12 (7). ISSN 20794991

Zakaria, M.S. and Mustapha, M. and Azmi, A.I. and Ahmad, A. and Danish, M. and Rubaiee, S. (2022) Machinability investigations of AZ31 magnesium alloy via submerged convective cooling in turning process. Journal of Materials Research and Technology, 19. pp. 3685-3698. ISSN 22387854

Mohamad, M.E. and Ahmad, A. and Sadon, H.B. and Sutanto, M.H. and Bujang, M. and Kifli, A.B.Z. and Mohamad, S.N.A. (2022) Peat Stabilization Using Waste Crumb Rubber Tire. Civil Engineering and Architecture, 10 (7). pp. 3253-3263. ISSN 23321091

Ghanim, A.A.J. and Beddu, S. and Abd Manan, T.S.B. and Al Yami, S.H. and Irfan, M. and Mursal, S.N.F. and Mohd Kamal, N.L. and Mohamad, D. and Machmudah, A. and Yavari, S. and Mohtar, W.H.M.W. and Ahmad, A. and Rasdi, N.W. and Khan, T. (2022) Prediction of Runoff in Watersheds Located within Data-Scarce Regions. Sustainability (Switzerland), 14 (13). ISSN 20711050

Abdullah, M.J. and Beddu, S. and Manan, T.S.B.A. and Syamsir, A. and Naganathan, S. and Mohd Kamal, N.L. and Mohamad, D. and Itam, Z. and Yee+, H.M. and Mohd Yapandi, M.F.K. and Mohamed Nazri, F. and Shafiq, N. and Isa, M.H. and Ahmad, A. and Wan Rasdi, N. (2022) The Strength and Thermal Properties of Concrete containing Water Absorptive Aggregate from Well-Graded Bottom Ash (BA) as Partial Sand Replacement. Construction and Building Materials, 339. ISSN 09500618

Ullah, K. and Irshad Qureshi, M. and Ahmad, A. and Ullah, Z. (2022) Substitution potential of plastic fine aggregate in concrete for sustainable production. Structures, 35. pp. 622-637. ISSN 23520124

Taufiqurrahman, I. and Ginta, T.L. and Ahmad, A. and Mustapha, M. and Fatmahardi, I. and Shozib, I.A. (2022) The effect of aluminum interlayer on weld strength, microstructure analysis, and welding parameters optimization in resistance spot welding of stainless steel 316L and Ti6Al4V titanium alloy. Engineering Solid Mechanics, 10 (2). pp. 165-178. ISSN 22918744

Shozib, I.A. and Ahmad, A. and Abdul-Rani, A.M. and Beheshti, M. and Aliyu, A.A. (2022) A review on the corrosion resistance of electroless Ni-P based composite coatings and electrochemical corrosion testing methods. Corrosion Reviews, 40 (1). pp. 1-37. ISSN 03346005

Abd Manan, T.S.B. and Khan, T. and Wan Mohtar, W.H.M. and Beddu, S. and Qazi, S. and Sheikh Khozani, Z. and Mohd Kamal, N.L. and Sarwono, A. and Jusoh, H. and Yavari, S. and Mustafa, S.F.Z. and Hanafiah, Z. and Mohd Zaid, H.F. and Machmudah, A. and Isa, M.H. and Ahmad, A. and Ghanim, A.A.J. (2021) Ecological and health risk assessment of polycyclic aromatic hydrocarbons (PAHs) in Sungai Perak, Malaysia. Journal of Cleaner Production, 294. ISSN 09596526

Abd Manan, T.S.B. and Beddu, S. and Mohd Kamal, N.L. and Mohamad, D. and Itam, Z. and Khan, T. and Machmudah, A. and Dutykh, D. and Mohtar, W.H.M.W. and Jusoh, H. and Nazri, F.M. and Yapandi, M.F.K.M. and Pati, S. and Ahmad, A. and Rasdi, N.W. (2021) Ecological risk indicators for leached heavy metals from coal ash generated at a malaysian power plant. Sustainability (Switzerland), 13 (18). ISSN 20711050

Ruhaizat, N.E. and Yusuf, N.K. and Lajis, M.A. and Mazlan, A.K. and Muktari, A.A. and Ahmad, A. (2021) Effect of Hot Press Forging Parameter on Microstructural Analysis and Mechanical Properties in Direct Recycling of Aluminium Aircraft Alloy (AA7075). Lecture Notes in Mechanical Engineering, 46. pp. 279-288. ISSN 21954356

Alani, S. and Zakaria, Z. and Saeidi, T. and Ahmad, A. and Alsariera, H. and Al-Heety, O.S. and Mahmood, S.N. (2021) Electronic bandgap miniaturized UWB antenna for near-field microwave investigation of skin. AIP Advances, 11 (3). ISSN 21583226

Vijaya Bhaskar Reddy, A. and Madhavi, V. and Ahmad, A. and Madhavi, G. (2021) Heavy metals removal using carbon based nanocomposites: Heavy metals adsorption by cbns. Green Energy and Technology. pp. 249-274. ISSN 18653529

Alam, M.A. and Ya, H.H. and Ahmad, A. and Yusuf, M. and Azeem, M. and Masood, F. (2021) Influence of aluminum addition on the mechanical properties of brass/Al composites fabricated by stir casting. In: UNSPECIFIED.

Reddy, A.V.B. and Shah, M.U.H. and Ahmad, A. and Moniruzzaman, M. (2021) Introduction to ionic liquids and their environment-friendly applications. Elsevier, pp. 1-15. ISBN 9780128245453; 9780128245460

Khalili, N.F.M. and Jun, H.J. and Ahmad, A. and Sallih, N. and Lajis, M.A. and Shamsudin, S. (2021) The Investigation of Hot Extrusion Process Parameters on Microstructure and Mechanical Performance of Aluminium Alloy in Biomedical Industry. Lecture Notes in Mechanical Engineering. pp. 327-332. ISSN 21954356

Jawaid, M. and Ahmad, A. and Reddy, A.V.B. (2021) Ionic Liquid-Based Technologies for Environmental Sustainability. Elsevier, pp. 1-402. ISBN 9780128245453; 9780128245460

Ahmad, A. and Mahmood, H. and Mansor, N. and Iqbal, T. and Moniruzzaman, M. (2021) Ionic liquid assisted polyetheretherketone-multiwalled carbon nanotubes nanocomposites: An environmentally friendly approach. Journal of Applied Polymer Science, 138 (14). ISSN 00218995

Ahmad, A. and Mahmood, H. and Mansor, N. and Iqbal, T. and Moniruzzaman, M. (2021) Ionic liquid modified PEEK-MWCNTs nanocomposites with enhanced thermomechanical properties. In: UNSPECIFIED.

Jawaid, M. and Ahmad, A. and Reddy, A.V.B. (2021) Ionic liquid-based technologies for environmental sustainability. Elsevier, pp. 1-402. ISBN 9780128245453

Alani, S. and Zakaria, Z. and Saeidi, T. and Ahmad, A. and Imran, M.A. and Abbasi, Q.H. (2021) Microwave imaging of breast skin utilizing elliptical uwb antenna and reverse problems algorithm. Micromachines, 12 (6). ISSN 2072666X

Shozib, I.A. and Ahmad, A. and Rahaman, M.S.A. and Abdul-Rani, A.M. and Alam, M.A. and Beheshti, M. and Taufiqurrahman, I. (2021) Modelling and optimization of microhardness of electroless Ni-P-TiO2composite coating based on machine learning approaches and RSM. Journal of Materials Research and Technology, 12. pp. 1010-1025. ISSN 22387854

Ahmad, A. and Sakidin, H. and Sari, M.Y.A. and Amin, A.R.M. and Sufahani, S.F. and Rasib, A.W. (2021) Naïve Bayes Classification of High-Resolution Aerial Imagery. International Journal of Advanced Computer Science and Applications, 12 (11). pp. 168-177. ISSN 2158107X

Mohd-Nasir, H. and Putra, N.R. and Chuo, S.C. and Daud, N.M. and Hartati, H. and Bakeri, N. and Ruslan, M.S.H. and Mohd-Setapar, S.H. and Ahmad, A. and Md Salleh, L. (2021) Optimization of the supercritical carbon dioxide extraction of Quercus infectoria galls extracts and its bioactivities. Journal of Food Processing and Preservation, 45 (2). ISSN 01458892

Abd Manan, T.S.B. and Beddu, S. and Mohamad, D. and Mohd Kamal, N.L. and Wan Mohtar, W.H.M. and Khan, T. and Jusoh, H. and Sarwono, A. and Ali, M.M. and Che Muda, Z. and Mohamed Nazri, F. and Isa, M.H. and Ghanim, A.A.J. and Ahmad, A. and Wan Rasdi, N. and Basri, N.A.N. (2021) Physicochemical and leaching properties of coal ashes from Malaysian coal power plant. Chemical Physics Letters, 769. ISSN 00092614

Abd Manan, T.S.B. and Beddu, S. and Mohamad, D. and Mohd Kamal, N.L. and Itam, Z. and Khan, T. and Jusoh, H. and Abdul Rahman, N.A. and Mohamed Nazri, F. and Mohd Yapandi, M.F.K. and Wan Mohtar, W.H.M. and Isa, M.H. and Che Muda, Z. and Ahmad, A. and Wan Rasdi, N. (2021) Physicochemical properties of absorbent hydrogel polymers in disposable baby diapers. Chemical Physics Letters, 774. ISSN 00092614

Ahmad, A. and Sutanto, M.H. and Al-Bared, M.A.M. and Harahap, I.S.H. and Abad, S.V.A.N.K. and Khan, M.A. (2021) Physio-Chemical Properties, Consolidation, and Stabilization of Tropical Peat Soil Using Traditional Soil Additives � A State of the Art Literature Review. KSCE Journal of Civil Engineering, 25 (10). pp. 3662-3678. ISSN 12267988

Reddy, A.V.B. and Ahmad, A. and Jawaid, M. (2021) Preface. Elsevier, xvii-xvii. ISBN 9780128245453; 9780128245460

Yasar, A. and Rana, S. and Moniruzzaman, M. and Nazar, M. and Tabinda, A.B. and Haider, R. and Ahmad, A. and Mukhtar, A. and Qyyum, M.A. and Ullah, S. (2021) Quality and environmental impacts of oil production through pyrolysis of waste tyres. Environmental Technology and Innovation, 23. ISSN 23521864

Manan, T.S.B.A. and Kamal, N.L.M. and Beddu, S. and Khan, T. and Mohamad, D. and Syamsir, A. and Itam, Z. and Jusoh, H. and Basri, N.A.N. and Mohtar, W.H.M.W. and Isa, M.H. and Shafiq, N. and Ahmad, A. and Rasdi, N.W. (2021) Strength enhancement of concrete using incinerated agricultural waste as supplementary cement materials. Scientific Reports, 11 (1). ISSN 20452322

Abdullah, M.N. and Mustapha, M. and Sallih, N. and Ahmad, A. and Mustapha, F. and Dahliyanti, A. (2021) Study and use of rice husk ash as a source of aluminosilicate in refractory coating. Materials, 14 (13). ISSN 19961944

Taufiqurrahman, I. and Ahmad, A. and Mustapha, M. and Ginta, T.L. and Haryoko, L.A.F. and Shozib, I.A. (2021) The effect of welding current and electrode force on the heat input, weld diameter, and physical and mechanical properties of SS316l/Ti6Al4V dissimilar resistance spot welding with aluminum interlayer. Materials, 14 (5). pp. 1-20. ISSN 19961944

Ullah, Z. and Qureshi, M.I. and Ahmad, A. and Khan, S.U. and Javaid, M.F. (2021) An experimental study on the mechanical and durability properties assessment of E-waste concrete. Journal of Building Engineering, 38. ISSN 23527102

Fatmahardi, I. and Mustapha, M. and Ahmad, A. and Derman, M.N. and Lenggo Ginta, T. and Taufiqurrahman, I. (2021) An exploratory study on resistance spot welding of titanium alloy Ti-6Al-4V. Materials, 14 (9). ISSN 19961944

Ahmad, A. and Sutanto, M.H. and Ahmad, N.R.B. and Bujang, M. and Mohamad, M.E. (2021) The implementation of industrial byproduct in malaysian peat improvement: A sustainable soil stabilization approach. Materials, 14 (23). ISSN 19961944

Asri, N.A.M. and Sakidin, H. and Othman, M. and Matori, A.N. and Ahmad, A. (2020) Analysis of the hydrocarbon seepage detection in oil palm vegetation stress using unmanned aerial vehicle (UAV) multispectral data. In: UNSPECIFIED.

Al-Amin, M. and Abdul Rani, A.M. and Abdu Aliyu, A.A. and Bryant, M.G. and Danish, M. and Ahmad, A. (2020) Bio-ceramic coatings adhesion and roughness of biomaterials through PM-EDM: a comprehensive review. Materials and Manufacturing Processes. pp. 1157-1180. ISSN 10426914

Sheikh, N.A. and Ching, D.L.C. and Khan, I. and Ahmad, A. and Ammad, S. (2020) Concrete based jeffrey nanofluid containing zinc oxide nanostructures: Application in cement industry. Symmetry, 12 (6). ISSN 20738994

Mohamad, N.A. and Zubair, N.A. and Lotf, E.A. and Nasef, M.M. and Ahmad, A. and Ali, R.R. and Abdullah, T.A.T. and Ting, T.M. (2020) Effect of ligand type on CO2 adsorption over amine functionalized fibrous adsorbents. In: UNSPECIFIED.

Mohamad, N.A. and Zubair, N.A. and Lotf, E.A. and Nasef, M.M. and Ahmad, A. and Ali, R.R. and Abdullah, T.A.T. and Ting, T.M. (2020) Effect of monoethanolamine concentration on CO2 capture by poly (chloromethyl styrene) grafted fibrous adsorbent. In: UNSPECIFIED.

Khan, R. and Ya, H.H. and Pao, W. and Majid, M.A.A. and Ahmed, T. and Ahmad, A. and Alam, M.A. and Azeem, M. and Iftikhar, H. (2020) Effect of sand fines concentration on the erosion-corrosion mechanism of carbon steel 90� elbow pipe in slug flow. Materials, 13 (20). pp. 1-16. ISSN 19961944

Hussain, K. and Zhu, W. and Salleh, M.N.M. and Ali, H. and Talpur, N. and Naseem, R. and Ahmad, A. and Ullah, A. (2020) Enhanced Bat Algorithm for Solving Non-Convex Economic Dispatch Problem. Advances in Intelligent Systems and Computing, 978 AI. pp. 419-428. ISSN 21945357

Noor, M. and Arshad, H. and Khan, M. and Khan, M.A. and Aslam, M.S. and Ahmad, A. (2020) Experimental and HEC-RAS modelling of bridge pier scouring. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 74 (1). pp. 119-132. ISSN 22897879

Ahmad, A. and Sutanto, M.H. and Harahap, I.S.H. and Al-Bared, M.A.M. and Khan, M.A. (2020) Feasibility of Demolished Concrete and Scraped Tires in Peat Stabilization - A Review on the Sustainable approach in Stabilization. In: UNSPECIFIED.

Hubadillah, S.K. and Othman, M.H.D. and Tai, Z.S. and Jamalludin, M.R. and Yusuf, N.K. and Ahmad, A. and Rahman, M.A. and Jaafar, J. and Kadir, S.H.S.A. and Harun, Z. (2020) Novel hydroxyapatite-based bio-ceramic hollow fiber membrane derived from waste cow bone for textile wastewater treatment. Chemical Engineering Journal, 379. ISSN 13858947

Zubair, N.A. and Nasef, M.M. and Ting, T.M. and Abdullah, E.C. and Ahmad, A. (2020) Radiation induced graft copolymerization of amine-containing monomer onto polyethylene coated propylene for CO2 adsorption. In: UNSPECIFIED.

Ahmad, A. and Ali, S. and Khan, M. and Harahap, I.S.H. and Aslam, M.S. (2020) Re-assessment of an earth fill dam using finite element method and limit equilibrium method (case study of Latamber Dam, Pakistan). Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 71 (2). pp. 87-102. ISSN 22897879

Alani, S. and Zakaria, Z. and Saiedi, T. and Ahmad, A. and Mahmood, S.N. and Saad, M.A. and Rashid, S.A. and Hamdi, M.M. and Albeyar, M.A.A.A. (2020) A Review on UWB Antenna Sensor for Wireless Body Area Networks. In: UNSPECIFIED.

Ahmad, A. and Lajis, M.A. and Yusuf, N.K. and Ab Rahim, S.N. (2020) Statistical optimization by the response surface methodology of direct recycled aluminum-alumina metal matrix composite (MMC-AlR) employing the metal forming process. Processes, 8 (7). ISSN 22279717

Rehman, W.U. and Mercian, Z.M.A. and Bhat, A.H. and Guan, B.H. and Sulaimon, A.A. and Khan, I.U. and Ullah, H. and Mukhtar, A. and Saqib, S. and Hameed, A. and Yasir, M. and Ahmad, A. (2020) Synthesis and Enhancement of Thermal Conductivity of Surfactant Free MWCNTs-Jatropha Oil-based Nanofluid. In: UNSPECIFIED.

Ahmad, A. and Bhat, A.H. and Buang, A. and Shah, S.M.U. and Afzal, M. (2019) Biotechnological application of microalgae for integrated palm oil mill effluent (POME) remediation: a review. International Journal of Environmental Science and Technology, 16 (3). pp. 1763-1788. ISSN 17351472

Nallappan, M.L. and Nasef, M.M. and Ting, T.M. and Ahmad, A. (2019) Breakthrough modelling of glucamine functionalized PVDF nanofibrous adsorbent in a fixed-bed column for separation of boron from water. Desalination and Water Treatment, 162. pp. 134-141. ISSN 19443994

Daud, N.A.B. and Abouzari Lotf, E. and Sophia Sha'Rani, S. and Nasef, M.M. and Ahmad, A. and Rasit Ali, R. (2019) Efforts to Improve PBI/Acid Membrane System for High Temperature Polymer Electrolyte Membrane Fuel Cell (HT-PEMFC). In: UNSPECIFIED.

Ahmad, A. and Bhat, A.H. and Buang, A. (2019) Enhanced biosorption of transition metals by living Chlorella vulgaris immobilized in Ca-alginate beads. Environmental Technology (United Kingdom), 40 (14). pp. 1793-1809. ISSN 09593330

Al-Homery, H.A. and Ashari, H. and Ahmad, A. (2019) Enhancing customer and supplier relationship through the iterative customer relationship management process. International Journal of Supply Chain Management, 8 (6). pp. 967-977. ISSN 20513771

Zakeri, M. and Abouzari-Lotf, E. and Nasef, M.M. and Ahmad, A. and Miyake, M. and Ting, T.M. and Sithambaranathan, P. (2019) Fabrication and characterization of supported dual acidic ionic liquids for polymer electrolyte membrane fuel cell applications. Arabian Journal of Chemistry, 12 (7). pp. 1011-1023. ISSN 18785352

Ahmad, A. and Abdullah, M.M. and Quegan, S. and Sufahani, S.F. and Sakidin, H. (2019) Haze effects on satellite remote sensing imagery and their corrections. International Journal of Advanced Computer Science and Applications, 10 (10). pp. 69-76. ISSN 2158107X

Abouzari-Lotf, E. and Zakeri, M. and Nasef, M.M. and Miyake, M. and Mozarmnia, P. and Bazilah, N.A. and Emelin, N.F. and Ahmad, A. (2019) Highly durable polybenzimidazole composite membranes with phosphonated graphene oxide for high temperature polymer electrolyte membrane fuel cells. Journal of Power Sources, 412. pp. 238-245. ISSN 03787753

Ahmad, A. and Hashim, U.K.M. and Abd Wahid, R. and Sakidin, H. and Sufahani, S.F. and Amin, A.R.M. and Abdullah, M.M. and Quegan, S. (2019) Implementation of land cover change detection based on supervised classifications of multispectral satellite data for leveraging Internet of Things. International Journal of GEOMATE, 17 (59). pp. 1863-1870. ISSN 21862982

Ahmad, A. and Hashim, U.K.M. and Abd Wahid, R. and Sakidin, H. and Sufahani, S.F. and Amin, A.R.M. and Abdullah, M.M. and Quegan, S. (2019) Implementation of land cover change detection based on supervised classifications of multispectral satellite data for leveraging internet of things. ARPN Journal of Engineering and Applied Sciences, 14 (10). pp. 1863-1870. ISSN 18196608

Sha'rani, S.S. and Abouzari-Lotf, E. and Nasef, M.M. and Ahmad, A. and Ting, T.M. and Ali, R.R. (2019) Improving the redox flow battery performance of low-cost thin polyelectrolyte membranes by layer-by-Layer Surface assembly. Journal of Power Sources, 413. pp. 182-190. ISSN 03787753

Hashim, U.K.M. and Ahmad, A. and Sakidin, H. and Sufahani, S.F. and Amin, A.R.B.M. (2019) Monitoring land cover changes in the tropics using satellite remote sensing data. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 3631-3636. ISSN 22783075

Yusuf, N.K. and Lajis, M.A. and Ahmad, A. (2019) Multiresponse optimization and environmental analysis in direct recycling hot press forging of aluminum AA6061. Materials, 12 (12). ISSN 19961944

Zakeri, M. and Abouzari-Lotf, E. and Nasef, M.M. and Ahmad, A. and Ripin, A. and Ting, T.M. and Sithambaranathan, P. (2019) Preparation and characterization of highly stable protic-ionic-liquid membranes. International Journal of Hydrogen Energy, 44 (58). pp. 30732-30742. ISSN 03603199

Nallappan, M.L. and Nasef, M.M. and Ting, T.M. and Ahmad, A. (2019) Removal of boron from aqueous solutions using electrospun PVDF nanofibrous adsorbent modified by poly(Glycidyl methacrylate)/glucamine ligands. Desalination and Water Treatment, 140. pp. 163-171. ISSN 19443994

Al-Homery, H.A. and Ashari, H. and Ahmad, A. (2019) The application of system thinking for firm supply chain sustainability: The conceptual study of the development of the iceberg problem solving tool (IPST). International Journal of Supply Chain Management, 8 (6). pp. 951-956. ISSN 20513771

Ahmad, A. and Bhat, A.H. and Buang, A. (2018) Biosorption of transition metals by freely suspended and Ca-alginate immobilised with Chlorella vulgaris: Kinetic and equilibrium modeling. Journal of Cleaner Production, 171. pp. 1361-1375. ISSN 09596526

Ahmad, A. and Hashim, U.K.M. and Mohd, O. and Abdullah, M.M. and Sakidin, H. and Rasib, A.W. and Sufahani, S.F. (2018) Comparative analysis of support vector machine, maximum likelihood and neural network classification on multispectral remote sensing data. International Journal of Advanced Computer Science and Applications, 9 (9). pp. 529-537. ISSN 2158107X

Ahmad, A. and Lajis, M.A. and Shamsudin, S. and Yusuf, N.K. (2018) Conjectured the behaviour of a recycled metal matrix composite (MMC-AlR) developed through hot press forging by means of 3D FEM simulation. Materials, 11 (6). ISSN 19961944

Ahmad, A. and Dzubir, F.A. and Ya, H.H. and Sudin, M.A. and Ismail, R. and Faizal, M. (2018) Deslgn and development of casted staln less steel Y-Tee jolnt for oll and gas appllcatlon. In: UNSPECIFIED.

Sakidin, H. and Nor, M.F.M. and Hassan, S. and Basrawi, F. and Ahmad, A. and Rahman, I. (2018) Development of Solar Powered Buggy Charging Station. In: UNSPECIFIED.

Zaharin, H.A. and Rani, A.M.A. and Azam, F.I. and Ginta, T.L. and Sallih, N. and Ahmad, A. and Yunus, N.A. and Zulkifli, T.Z.A. (2018) Effect of unit cell type and pore size on porosity and mechanical behavior of additively manufactured Ti6Al4V scaffolds. Materials, 11 (12). ISSN 19961944

Sha'Rani, S.S. and Abouzari-Lotf, E. and Nasef, M.M. and Ahmad, A. and Ting, T.M. and Ali, R.R. (2018) Improved vanadium barrier properties of perfluorinated sulfonic acid membranes for vanadium redox flow battery. In: UNSPECIFIED.

Ahmad, A. and Lajis, M.A. and Shamsudin, S. and Yusuf, N.K. (2018) Integrating simulation with experiment for recycled metal matrix composite (MMC-AlR) developed through hot press forging. Key Engineering Materials, 775 KE. pp. 493-498. ISSN 10139826

Etesami, M. and Abouzari-Lotf, E. and Ripin, A. and Mahmoud Nasef, M. and Ting, T.M. and Saharkhiz, A. and Ahmad, A. (2018) Phosphonated graphene oxide with high electrocatalytic performance for vanadium redox flow battery. International Journal of Hydrogen Energy, 43 (1). pp. 189-197. ISSN 03603199

Tarmizi, Z.I. and Nasef, M.M. and Nallappan, M.L. and Khairudin, N.B.A. and Ali, R.R. and Ahmad, A. (2018) Preparation and characterization of hydrophilic polyurethane scaffolds by electrospinning and radiation induced grafting of 2-hydroxyethylmethacrylate. In: UNSPECIFIED.

Bahari, N.I.S. and Ahmad, A. and Aboobaider, B. and Bin Razali, M.F. and Sakidin, H. and Isa, M.S.M. and Ananta, G.P. and Sari, Y.A. and Sari, N.A. (2018) Remote sensing data restoration to compensate for haze effect. Journal of Theoretical and Applied Information Technology, 96 (1). pp. 118-126. ISSN 19928645

Ghasemi, M. and Ahmad, A. and Jafary, T. and Azad, A.K. and Kakooei, S. and Wan Daud, W.R. and Sedighi, M. (2017) Assessment of immobilized cell reactor and microbial fuel cell for simultaneous cheese whey treatment and lactic acid/electricity production. International Journal of Hydrogen Energy, 42 (14). pp. 9107-9115. ISSN 03603199

Andarany, K.S. and Sagir, A. and Ahmad, A. and Deni, S.K. and Gunawan, W. (2017) Cellulose acetate layer effect toward aluminium corrosion rate in hydrochloric acid media. In: UNSPECIFIED.

Ahmad, A. and Bhat, A.H. and Buang, A. (2017) Immobilized chlorella vulgaris for efficient palm oil mill effluent treatment and heavy metals removal. Desalination and Water Treatment, 81. pp. 105-117. ISSN 19443994

Moayedfar, M. and Rani, A.M. and Hanaei, H. and Ahmad, A. and Tale, A. (2017) Parameter optimization and stretch enhancement of AISI 316 sheet using rapid prototyping technique. In: UNSPECIFIED.

Abouzari-Lotf, E. and Ghassemi, H. and Nasef, M.M. and Ahmad, A. and Zakeri, M. and Ting, T.M. and Abbasi, A. and Mehdipour-Ataei, S. (2017) Phase separated nanofibrous anion exchange membranes with polycationic side chains. Journal of Materials Chemistry A, 5 (29). pp. 15326-15341. ISSN 20507488

Ahmad, A. and Bhat, A.H. and Buang, A. (2017) Photobioreactor engineering for integrated algal biofuel production, carbon dioxide (CO2) mitigation, and wastewater treatment. Nova Science Publishers, Inc., pp. 91-124. ISBN 9781536123555; 9781536123548

Ahmad, A. and Shah, S.M.U. and Buang, A. and Abdullah, M.A. (2016) Anaerobic co-cultivation of multi-algal species with oil palm empty fruit bunches for mill effluent treatment and biomethane production. Jurnal Teknologi, 78 (5-6). pp. 65-73. ISSN 01279696

Ghasemi, M. and Wan Daud, W.R. and Hassan, S.H.A. and Jafary, T. and Rahimnejad, M. and Ahmad, A. and Yazdi, M.H. (2016) Carbon nanotube/polypyrrole nanocomposite as a novel cathode catalyst and proper alternative for Pt in microbial fuel cell. International Journal of Hydrogen Energy, 41 (8). pp. 4872-4878. ISSN 03603199

Hashim, U.K.M. and Ahmad, A. and Aboobaider, B.M. and Sakidin, H. and Subatira, B. and Isa, M.S.M. (2016) Change detection from Landsat-5 TM Satellite data. ARPN Journal of Engineering and Applied Sciences, 11 (17). pp. 10234-10238. ISSN 18196608

Shah, S.M.U. and Ahmad, A. and Othman, M.F. and Abdullah, M.A. (2016) Effects of palm oil mill effluent media on cell growth and lipid content of Nannochloropsis oculata and Tetraselmis suecica. International Journal of Green Energy, 13 (2). pp. 200-207. ISSN 15435075

Abdullah, M.A. and Ahmad, A. and Shah, S.M.U. and Shanab, S.M.M. and Ali, H.E.A. and Abo-State, M.A.M. and Othman, M.F. (2016) Integrated algal engineering for bioenergy generation, effluent remediation, and production of high-value bioactive compounds. Biotechnology and Bioprocess Engineering, 21 (2). pp. 236-249. ISSN 12268372

Abdullah, M.A. and Ahmad, A. (2016) Integrated algal industrial waste treatment and bioenergy co-generation. Apple Academic Press, pp. 153-223. ISBN 9781771883634; 9781771883627

Yadzir, Z.H.M. and Shukor, M.Y. and Ahmad, A. and Nazir, M.S. and Shah, S.M.U. and Abdullah, M.A. (2016) Phenol removal by newly isolated Acinetobacter baumannii strain Serdang 1 in a packed-bed column reactor. Desalination and Water Treatment, 57 (28). pp. 13307-13317. ISSN 19443994

Ahmad, A. and Buang, A. and Bhat, A.H. (2016) Renewable and sustainable bioenergy production from microalgal co-cultivation with palm oil mill effluent (POME): A review. Renewable and Sustainable Energy Reviews, 65. pp. 214-234. ISSN 13640321

Saiful Bahari, N.i. and Ahmad, A. and Aboobaider, B.M. and Razali, M.F. and Sakidin, H. and Mohamad Isa, M.S. (2016) Restoration of hazy data based on spectral and statistical methods. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 6807-6813. ISSN 18196608

Batcha, S.R. and Sakidin, H. and Ahmad, A. (2016) Simpler Neill mapping function using nonlinear curve fitting method. In: UNSPECIFIED.

Sakidin, H. and Batcha, S.R. and Ahmad, A. (2016) Simpler component of non-hydrostatic UNBabc mapping function using nonlinear curve fitting method. In: UNSPECIFIED.

Batcha, S.R. and Sakidin, H. and Ahmad, A. (2016) Simpler hydrostatics component of UNBabc mapping function using nonlinear curve fitting method. In: UNSPECIFIED.

Ahmad, A. and Shah, S.M.U. and Othman, M.F. and Abdullah, M.A. (2015) Aerobic and anaerobic co-cultivation of Nannochloropsis oculata with oil palm empty fruit bunch for enhanced biomethane production and palm oil mill effluent treatment. Desalination and Water Treatment, 56 (8). pp. 2055-2065. ISSN 19443994

Abdullah, M.A. and Afzaal, M. and Ismail, Z. and Ahmad, A. and Nazir, M.S. and Bhat, A.H. (2015) Comparative study on structural modification of Ceiba pentandra for oil sorption and palm oil mill effluent treatment. Desalination and Water Treatment, 54 (11). pp. 3044-3053. ISSN 19443994

Razali, M.F. and Ahmad, A. and Mohd, O. and Bahari, N.I.S. and Sakidin, H. (2015) Quantifying haze from satellite using haze optimized transformation (HOT). Applied Mathematical Sciences, 9 (29-32). pp. 1407-1416. ISSN 1312885X

Javaid, N. and Ahmad, A. and Nadeem, Q. and Imran, M. and Haider, N. (2015) iM-SIMPLE: iMproved stable increased-throughput multi-hop link efficient routing protocol for Wireless Body Area Networks. Computers in Human Behavior, 51. pp. 1003-1011. ISSN 07475632

Abdullah, M.A. and Shah, S.M.U. and Ahmad, A. and El-Sayed, H. (2014) Algal biotechnology for bioenergy, environmental remediation and high-value biochemicals. Apple Academic Press, pp. 301-344. ISBN 9781482239386; 9781771880015

Ahmad, A. and Shah, S.M.U. and Othman, M.F. and Abdullah, M.A. (2014) Biomethane production and palm oil mill effluent treatment by co-cultivation of Nannochloropsis oculata. Applied Mechanics and Materials, 625. pp. 818-821. ISSN 16609336

Ahmad, A. and Shah, S.M.U. and Othman, M.F. and Abdullah, M.A. (2014) Enhanced palm oil mill effluent treatment and biomethane production by co-digestion of oil palm empty fruit bunches with Chlorella Sp. Canadian Journal of Chemical Engineering, 92 (9). pp. 1636-1642. ISSN 00084034

Shah, S.M.U. and Ahmad, A. and Othman, M.F. and Abdullah, M.A. (2014) Enhancement of lipid content in isochrysis galbana and pavlova lutheri using palm oil mill effluent as an alternative medium. Chemical Engineering Transactions, 37. pp. 733-738. ISSN 22839216

Ahmad, A. and Shah, S.M.U. and Buang, A. and Othman, M.F. and Abdullah, M.A. (2014) Evaluation of aerobic and anaerobic co-digestion of Tetraselmis suecica and oil palm empty fruit bunches by response surface methodology. Advanced Materials Research, 925. pp. 243-247. ISSN 10226680

Ahmad, A. and Abdul Ghani, M.K. and Razali, S. and Sakidin, H. and Md Hashim, N. (2014) Haze reduction from remotely sensed data. Applied Mathematical Sciences (33-36). pp. 1755-1762. ISSN 1312885X

Bhat, A.H. and Dasan, Y.K. and Haque, I.U. and Ahmad, A. (2014) Potential applications and adverse effects of bisphenol a in humans. Nova Science Publishers, Inc., pp. 13-31. ISBN 9781634632386; 9781634632102

Hussain, S. and Aziz, H.A. and Isa, M.H. and Ahmad, A. and Van Leeuwen, J. and Zou, L. and Beecham, S. and Umar, M. (2011) Orthophosphate removal from domestic wastewater using limestone and granular activated carbon. Desalination, 271 (1-3). pp. 265-272. ISSN 00119164

Aftab, M.K. and Vasant, P. and Ahmad, A. and Elamvazuthi, I. and Rajendran, S. (2009) Design and construction of hybrid robots for robotics competition. In: UNSPECIFIED.

Elamvazuthi, I. and Vasant, P. and Ahmad, A. and Aftab, M.K. and Rajendran, S. (2009) Reactive dye impingement on woven fabrics and it's effect on colour. In: UNSPECIFIED.

Sakidin, H. and Abu Bakar, M.R. and Shariff, A.R.M. and Noorani, M.S.Md. and Matori, Abd.N. and Mohamed, A. and Ahmad, A. (2008) The effect of UNBabc mapping function modification to GPS tropospheric delay. Malaysian Journal of Mathematical Sciences, 2 (1). pp. 59-71. ISSN 18238343